• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.3
• /
• pp.51-57
• /
• 2015

In this paper, we tried to broaden a width of practical use field for applications through combining to existing contents after constructing various contents for companion animals. For this, we designed and developed our new companion animal management system(PET-IN) by adding various contents such as information management, schedule management, health management, QR code, SNS, shopping, map service for companion animals to smartphone applications. By PET-IN accessibility and satisfactory level tests, we found out that new synergy effect have appeared through combining each contents, and connectivity is increased. So, practical use field is broaden. These tests show us that comprehensive content composition is necessary for companion animal applications, and this study can be used as important data when new companion animal application contents are constructed in the future.

• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.8 no.2
• /
• pp.33-37
• /
• 2010

Purpose : We investigated the effects of the insole types on lower leg muscle activation during treadmill walking. The three insole types investigated for this study were normal insole, medial wedge insole, and viscoheel. Methods : Participants were assigned into three groups. People with foot transformation were excluded from this study. Each participant walked for ten minutes. The first day we applied a normal insole. On the second day, a medial wedge insole was applied. Finally, on the last day a viscoheel was applied. After walking on a treadmill for ten minutes, we measured muscle activation in lower leg muscles (gastrocnemius and tibialis anterior). Surface electromyography (EMG) was used to measure muscle activity. The data were analyzed using one-way analysis of variance (ANOVA) with repeated measures to determine the statistical significance. Results : The results of this study were summarized as follows. While walking on the treadmill, root mean square (RMS) values of the gastrocnemius when the viscoheel was applied were significantly lower than the other insole types. There was no significant difference for the RMS values for the tibialis anterior using viscoheel. The normal insole and viscoheel insole were significantly different in a post hoc analysis. However, there was no significant difference for normal insole and medial wedge insole. Conclusion : Using a viscoheel insole decreases muscle activity of the lower leg. Therefore, in conclusion, the viscoheel insole type reduces the load on the lower leg during walking.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.10
• /
• pp.77-84
• /
• 1998

The temperature difference occurs at the test points of chamber, because the traditional Test Handler consists of a heater and a fan. To reduce the temperature variation at different points in the chamber, we divided the heater to three parts which are controlled independently. First, we identified the chamber's parameter and then designed a LQG controllers by the identification model. RTD sensors and VME system were used to construct the temperature control system. In our experiment for the proposed control system, the temperature variation was reduced from ${\pm}1.5^{\circ}C$ to ${\pm}0.35^{\circ}C$ at 50$^{\circ}C$ ${\cdot}$ 80$^{\circ}C$ and 120$^{\circ}C$.

• The Research Journal of the Costume Culture
• /
• v.23 no.2
• /
• pp.294-309
• /
• 2015

This study aims to clarify the aesthetic values between emotion of human and expression of technology in contemporary fashion as it analyzes formative characteristics of related cases in fashion based on principles of 3D Printing technology and the viewpoint of mechanic aesthetics. The conclusions of this study are as follows. First, 3D Printing fashion is not only expressed diverse variations by its principles of formative methods, materials and properties, but also changes of silhouette by applying system of designers. Second, general characteristics of 3D Printing fashion is represented by various applications in SLS system, and it can be specifically explained application to a portion of clothing, decorative roles of clothing, complicated pattern making through crossing fabrics using 3D scanner and displaying a certain object changing fashion styles, and so forth. Third, the formative characteristics of 3D Printing fashion from the perspective of mechanic aesthetics is as follows. It can be analyzed as the integration of metaphysical values through compared symbolization of natural feature and technical evolution, partial dynamics and interactive velocity-based, formative combinations for abstract expression using architectural components, cosmos images and substantialized structures through images of organic space interacted human shapes. As the mention above, 3D Printing technology can creative a diverse area of fashion, and express images of new technological fashion through various works with continuous development of techniques.

• Journal of the Korean Chemical Society
• /
• v.31 no.1
• /
• pp.45-54
• /
• 1987

Dowex 1-X8 resin ion exchanged with calcon carboxylic acid (CCA-Dowex 1-X8) and 2-methyl-8-hydroxyquinoline(MHQ) impregnated-Amberlite XAD-4 resin (MHQ-XAD-4) were examined for the separation and preconcentration of ferric ion from the various matrices. The stabilities of these resins were investigated, and their capacities on ferric ion were also measured. The effect of pH on the adsorption of ferric ion and matrix ions, such as Al(Ⅲ) and Ca(Ⅱ), was investigated to determine the optimun pH ranges. Separation and preconcentration of iron in aluminium foil and mineral water samples were studied by elution method with these resin columns. The recovered ions by 10ml of 2F nitric acid was determined by flame atomic spectrophotometry. SP-Sephadex C-25 column was used to separate ferrous and ferric ion in mineral water by stepwise elution with ferrozine and 1 % ascorbic acid-ferrozine solution. The concentrated and separated each ion could be determined spectrophotometrically at the analytical wavelenth of Fe(Ⅱ)-ferrozine complex (562nm).

• Journal of the Korean Chemical Society
• /
• v.37 no.1
• /
• pp.83-91
• /
• 1993

The eletrochemical behavior of light lanthanide complexes has been investigated by several electrochemical techniques in alkaline solutions. The composition of the complexes was determined by spectrophotometric method to be 1 : 1 and reduction mechanism was two steps 1 electron transfer reaction. The half wave potential of first peak depended on pH and cathodic current showed remarkably adsorptive properties. The results of DC and CV investigation demonstrated the quise-reversible nature of the electron transfer. The anion radical formed after first one electron reduction process, dimerizes to form dimer. The apparent irreversible behavior of the second wave is a result of the existence of a fast protonation following the second electron transfer. An exhaustive electrolysis was carried out at controlled potential of -1.80 V, deep blue color of the solution became progressively weaker, and then the solution became colorless solution. The final product of an exhaustive electrolysis is electro-inactive. The appearance of four steps may be explained by the fact the reduction of Ln-OCP elucidated ECEC mechanism.

• Elastomers and Composites
• /
• v.33 no.5
• /
• pp.324-334
• /
• 1998

SBR, polyurethane, acryl and epoxy latex were seperately mixed with ethylene-vinylacetate emulsion(EVA) in the range of $0{\sim}50%$ (wt.% ). For the mixtures, the various physical properties were examined. The viscosity of mixtures was mainly influenced by compatability with EVA emulsion, was decreased within 20% (wt.% ) of latex content, and showed the similar values over 20% (wt.% ) of latex content. The workable time of cement mixtures was mainly depended on the reactivity with cement. The formation of film could be only within $30{\sim}40$ minutes from mixing cement. The tack-free time of mixtures was influenced by the sorts of resin and the quantity of cement. The slow order of tack-free time was epoxy mixtures>SBR mixtures>urethane mixtures>acryl mixtures. The pencil hardness of mixtures was $4B{\sim}2H$, represented higher value in cement mixtures than in emulsion state.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1999.10a
• /
• pp.27-27
• /
• 1999

To illustrate the global variation of the droplet mean diameters and the turbulent flow characteristics in counterflowing internal mixing pneumatic nozzle, the experimental measurements at five axial downstream locations(i.e., at Z=30, 50, 80, 120, and 170mm) were made using a PDPA(Phase Doppler Particle Analyzer) under the different air injection pressures ranging from 40 ㎪ to 120 ㎪. A nozzle with axi-symmetric tangential-drilled four holes at an angle of 15$^{\circ}$ has been designed and manufactured. The distributions of velocities, turbulence intensities, turbulence kinetic energy, turbulent correlation coefficients, spray angle, droplet mean diameters, volume flux, number density are quantitatively analyzed. It is possible to discern the effects of increasing air pressure. It indicates that the strong axial momentum in spite of more or less disparity between the velocity components means more reluctant to disperse radially, and that axial fluctuating velocities are substantially higher than those of radial and tangential ones, suggesting that the disintegration process is enhanced under higher air assist. The larger droplets are detected in the spray centerline at the near stations and smaller ones are generated due to further subsequent breakup at farther axial locations are attributed to the internal mixing type nozzle characteristics. Despite of the strong axial momentum, the poor atomization around the centre close to the nozzle exit is attributed to the lower rates of spherical particles which are not subject to instantaneous breakup. As it goes downstream, however, substantial increases in SMD(Sauter Mean Diameter) from the central part toward spray periphery are understandable because the droplet relative velocity is too low to bring about any subsequent disintegration.

• Composites Research
• /
• v.26 no.3
• /
• pp.182-188
• /
• 2013

The purpose of this study was to measure the volumetric polymerization shrinkage kinetics and stress of a silorane-based dental restorative composite and compare it with those of conventional methacrylate-based dental composites. Two methacrylate-based composites (Z250, Z350 flowable) and one silorane-based composite (P90) were investigated. The volumetric polymerization shrinkage of the composites during light curing was measured using a laboratory-made volume shrinkage measurement instrument based on the Archimedes' principle, and the polymerization stress was also determined with the strain gage method. The shrinkage of silorane-based composites (P90) was the lowest, and that of Z350 flowable was the highest. Peak polymerization shrinkage rate was the lowest in P90 and the highest in Z350 flowable. The time to reach peak shrinkage rate of P90 was longer than those of the methacrylate-based composites. The polymerization shrinkage stress of P90 was lower than those of the methacrylate-based composites.

• Journal of Environmental Science International
• /
• v.19 no.7
• /
• pp.907-915
• /
• 2010

Agriculture nonpoint pollution source is a significant contributor to water quality degradation. To establish effective water quality control policy, environpolitics establishment person must be able to estimate nonpoint source loads to lakes and streams. To meet this need for orchard area, we investigated a real rainfall runoff phenomena about it. We developed nonpoint source runoff estimation models for vineyard area that has lots of fertilizer, compost specially between agricultural areas. Data used in nonpoint source estimation model gained from real measuring runoff loads and it surveyed for two years(2008-2009 year) about vineyard. Nonpoint source runoff loads estimation models were composed of using independent variables(rainfall, storm duration time(SDT), antecedent dry weather period(ADWP), total runoff depth(TRD), average storm intensity(ASI), average runoff intensity(ARI)). Rainfall, total runoff depth and average runoff intensity among six independent variables were specially high related to nonpoint source runoff loads such as BOD, COD, TN, TP, TOC and SS. The best regression model to predict nonpoint source runoff load was Model 6 and regression factor of all water quality items except for was $R^2=0.85$.