• Journal of the Korean Geosynthetics Society
• /
• v.10 no.3
• /
• pp.1-8
• /
• 2011

This paper presents the performance evaluation of asphalt pavement reinforced with fiber sheet type of geosynthetics and observations conducted to evaluate the practical efficiencies and performance of overlay asphalt pavement reinforced with geosynthetics. In this study, performance evaluation were performed for the six section of construction site. The performance indcators of asphalt pavement reinforced with geosynthetics has been collected Automatic Road Analyzer (ARAN), Falling Weight Deflectometer (FWD) and have been analyzed for rutting, cracking ratio, falling weight and international roughness index. As a result of performance evaluations, geosynthetics reinforced asphalt pavement is sigficant effect on increasing a cracking resistance than the non-reinfroced asphalt pavement, also rutting and crak is slowly increase as incerasingly performance period.

• Journal of the Korean Geosynthetics Society
• /
• v.10 no.3
• /
• pp.43-51
• /
• 2011

This paper describes the results of pullout tests in the laboratory, which are conducted to assess the pullout performance of recently developed geosynthetic strip reinforcement with rounded band anchor. The geosynthetic strip can be used as reinforcements in reinforced soil wall with concrete block facing. The pullout resistance of the geosynthetic strip with rounded band anchor is mobilized by the combination of the interface friction between soil-reinforcement surface and the passive soil resistance caused by the rounded band anchor. Therefore, both the friction resistance and the passive resistance have to be considered in design. From the pullout test results, when the rounded band anchor are formed in the end part of the geosynthetic strip, pullout strength increases about from 10% to 65%. The passive resistance can be evaluated based on the pullout test results.

• Journal of the Korean Geosynthetics Society
• /
• v.8 no.2
• /
• pp.21-29
• /
• 2009

The connection strength between wall facing and geosynthetics should be evaluated by experimental method in the design of reinforced earth wall. However, the evaluation result of connection strength using the typical design method, FHWA(1996) and NCMA(1997), is excessively because of a safety factors. Therefore, this study is conducted in connection strength test between wall facing and geosynthetics, then the test result is applied to the design case by NCMA, FHWA and Soong & Koener(1997). The results confirmed that the evaluation method by Soong & Koener, which is used ultimate connection strength by connection strength test in allowable connection strength, is satisfied with stable in design.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.5 no.3
• /
• pp.251-260
• /
• 2003

Tunnel blasting has been performed with V-cut to investigate the characteristics. Blasting vibrations were measured at two directions, the proceed direction and side direction. Propagation characteristics were determined by regression analysis; square root scaled distance and cube root scaled distance with maximum charge per delay of the blast. Testing result, The cross point was 62m in the allowable vibration velocity of 3mm/sec and 46m in 5mm/sec. Also, vibration level with measuring point was highest and decayed fastest, adapting to cube root scaled distance, for the proceed direction on ground.

• Fashion & Textile Research Journal
• /
• v.18 no.6
• /
• pp.787-799
• /
• 2016

This study considers aesthetic characteristics by examining fashion style of fashion journalist Anna Wintour. Fashion journalists are specialists who work at fashion media. Especially, Anna Wintour is one of the most famous fashion journalist in the world and fashion icon, who has been editor-in chief of Vogue USA since 1988. For this study, Anna Witour's photograph was collected from 2010 to 2015 on web-sites. After collecting images, it analysed with 4criterions which were silhouette, color, fabric(pattern and texture) and hair style(and accessories) following advance researches analysis about fashion style. The conclusions of this study are as follows. First, symbolism revealed that could express her identity through utilizing steady items such as blond bob hair, Chanel bold sunglasses, short round neckless and Manolo Blahnik's low-heeled slingback nude sandals. Especially, she gave consistency to her fashion style with fixed hair style and accessories which are similar in shape. Second, femininity, that reveal as an internal characteristic such as sensitivity and as an external characteristic like fluidity. Anna Wintour expressed femininity with elegant curvy silhouette, various of color and flower pattern. Particularly, she emphasized nature women's body shape with princess silhouette, slim silhouette. Third, analysis result indicated characteristic of authority with oversize silhouette, wide lapel details and glamorous genuine fur items. Furthermore, some of her fur items looked overwhelming which dyed in artificial color or printed with leopard pattern. These powerful items contained immanent meanings that are power and position which could express a role as an editor-in chief of Vogue USA.

• ALGAE
• /
• v.18 no.1
• /
• pp.49-58
• /
• 2003

The short-term dynamics of the summer phytoplankton community structure were investigated in coastal waters around Namhae Island, the Southern Sea of Korea. The study was based on a comprehensive survey constituting 39 collections from 13 stations on July 18-22, August 1-2, 14-16 and 27-30, respectively. The community structure was analysed using cluster analysis and important environmental correlates of the assemblage structure were identified with canonical correspondence analysis (CCA). Water temperature, salinity, NO₂, NO₃, NH₄, PO₄, chlorophyll a and transparency were measured as physico-chemical environmental factors which may be associated with the phytoplankton community structure. Variations of salinity and concentrations of NO₃ and chlorophyll a were not significant. In addition to warmer water temperature, concentrations of NO₂, NO₄and PO₄ decreased at the beginning of August. And transparency was deeper and water column became very unstable after the middle of August. A wide taxonomic diversity was encountered during the survey, including a total of 121 taxa which was composed of 72 diatoms, 48 dinoflagellates and 1 euglenoid species. Cluster analysis showed that the Phytoplankton community could be divided into 4 distinct groups, indicating rapid changes of the community in the short course of this survey. These phytoplankton groups also showed distinctive dispersion patterns in 2-dimensional canonical space, indicating distinct groupings for stations at each survey. Dominant taxa of diatoms (Chaetoceros curvisetus, Chaetoceros spp., Leptocylindrus danicus, Leptocylindrus mediteraneus, Skeletonema costanum, and Pseudo-nitzschia pungen) clustered in region of CCA space corresponding to stations surveyed at the middle of July. Dominant taxa of dinoflagellates were tightly associated with stations surveyed at the middle (Karenia breve) and end (Cochlodinium polykrikoides and Polykrikos schwartzii) of August. The CCA also showed that the phytoplankton community compositions were highly associated with water temperature, transparency, NO₂, NH₄ and PO₄, suggesting that gradients in physical and nutrient conditions affect short-term changes in phytoplankton composition.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.10
• /
• pp.1190-1199
• /
• 2014

As a considerable, experimental approach, an autocarriage type of $CO_2$ welding machine and a MIG(metal inert gas) welding robot in the inert gas atmosphere were utilized in order to realize Al 5083 welding to hull and relevant components of green leisure ships. This study aims at investigating the effect of welding conditions(current, voltage, welding speed, etc.) on thermal deformation that occurs as welding operation and tensile characteristics after welding, by using Al 5083, nonferrous material, applied to manufacturing of eco-environmental leisure ships. With respect to welding condition to minimize the thermal deformation, 150 A and 16 V at the wire-feed rate of 6 mm/sec were acquired in the process of welding Al 5083 through an auto carriage type of $CO_2$ welding feeder. As to tensile characteristics of Al 5083 welding through a MIG welding robot, most of tensile specimens showed the fracture behavior on HAZ(heat affected zone) located at the area joined with weld metal, except for some cases. Especially, for the case of the Al specimen with 5 mm thickness, 284.62 MPa of tensile strength and 11.41 % of elongation were obtained as an actual allowable tensile stress-strain value. Mostly, after acquiring the optimum welding condition, the relevant welding data and technical requirements might be provided for actual welding operation site and welding procedure specification (WPS).

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.12
• /
• pp.1641-1646
• /
• 2004

The objective of this study was to generate transgenic mice expressing human resistin gene by using the tetraploidembryonic stem (ES) cell complementation method. Human resistin gene was amplified from human fetal liver cDNA library by PCR, cloned into $pCR^{(R)}$ 2.1 $TOPO^{(R)}$ vector and constructed in pCMV-Tag4C vector. Mammalian expression plasmid containing human resistin was transfected into D3-GL ES cells by Lipofectamine 2,000, and then after 10-12 days of transfection, the human resistin-expressing cells were selected with G418. In order to produce tetraploid embryos, blastomeres of diploid embryos at the two-cell stage were fused with two times of electric pulse using 60 V 30 $\mu$sec (fusion rate: 2,114/2,256, 93.5%) and cultured up to the blastocyst stage (development rate: 1,862/2,114, 94.6%). The selected 15-20 ES cells were injected into tetraploid blastocysts, and then transferred into the uteri of E 2.5 d pseudopregnant recipient mice. To investigate the gestation progress, two E 19.5 mused fetuses were recovered by Cesarean section of which one fetus was confirmed to contain human resistin gene by genomic DNA-PCR. Therefore, our findings demonstrate that tetraploid-ES mouse technology can be considered as a useful tool to produce transgenic mice for the rapid analysis of gene function in vivo.

• The Journal of the Korea Contents Association
• /
• v.11 no.10
• /
• pp.425-433
• /
• 2011

The purpose of this study was to investigate the relationships between leisure competence, leisure flow, and leisure satisfaction of university students participating in leisure activity. The subjects were selected by stratified cluster random sampling method. They were composed of 308 students who had been leisure activity participating in university students. The Leisure competence(Ahn, 2005), Leisure flow(Lee, 2006), Leisure satisfaction(Ahn, 2009) were used for collecting data. In consequence of exploratory factor analysis, 3sub-factors(leisure competence), 5sub-factors(leisure flow), and 5sub-factor(leisure satisfaction were found. Cronbach's ${\alpha}$ coefficient were .726~.850, .537~.887, .764~.943 respectively. For the statistical analysis, SPSS 15.0 and AMOS 7.0 were utilized. The relationship between research variables were examined by the frequency, explore factor, reliability, corelation, structural equation modeling analysis. The significance level of all test was p<.05. The findings were as follows: First, leisure competence did have a positive influence on leisure flow. Second, leisure competence didn't have influence on leisure satisfaction. Final, leisure flow did have positive influence on leisure satisfactions.

• Herbal Formula Science
• /
• v.12 no.1
• /
• pp.105-121
• /
• 2004

This report describes the studies as follows through the research into the data of Fructus Forsythiae main blended prescriptions from Dongeuybogam. Through investigation on prescriptions from Dongeuybogam with Fructus Forsythiae as an ingredient, the following conclusions were reached. 1. All kinds of infection in a boil and the malignant tumor recorded the largest number of clinical frequency of the prescriptions in therapeutic use when Fructus Forsythiae was taken as a principle medicine. 2. The prescriptions are compounded with Fructus Forsythiae as a principle medicine can apply to eye disease, nose and ear disease, throat disease, trauma, the malignant tumor, skin disease, dental disease and heat pathogenic disease. 3. Various pathogenic factors such as wind-heat, heat, fire, wind, qi, poison, cold are put to practical use. 4. The dosage of Fructus Forsythiae is 2bun(about 0.75 gram) to 3jeon(about 11.25 gram), however 1joen(about 3.75 gram) has been taken the most for clinical application. 5. With examination the formulae of presciptions containing Fructus Forsythiae, I found the basic prescriptions as well as the medicines are in conjunction with Fructus Forsythiae and the theoretic grounds of formula in combining Fructus Forsythiae as a group of medicine for prescription through this research.