• Proceedings of the KIEE Conference
• /
• 2007.11a
• /
• pp.86-87
• /
• 2007

An amperometric glucose biosensor has been developed using viologen derivatives as electron mediator of glucose oxidase (GOD) at Au electrode. Highly stable self assembled monolayer (SAM) of thiol-based viologen is immobilized onto the Au electrode followed byGOD is immobilized onto the viologen modified electrode. This biosensor response to glucose was evaluated amperometrically in the potential of -300 mV. Upon immobilization of glucose oxidase onto the viologen modified-electrode, the biosensor showed rapid response towards glucose. Experimental conditions influencing the biosensor performance such as, pH, potential were optimized and assessed. This biosensor offered an excellent electrochemical response for glucose concentration below ${\mu}mol$ level with high sensitivity and selectivity and short response time. The levels of the RSD's (< 5 %) for the entire analyses reflected the highly reproducible sensor performance. Using the optimized a linear relationship between current and glucose concentration was obtained up to $4.5{\times}10^{-4}$ M. In addition, this biosensor showed well reproducibility and stability.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.2
• /
• pp.453-458
• /
• 2017

R-Bar (Overhead Rigid Conductor system) has been lately used for the speed of over 200km/h in Europe, while it has been developed and used for the max. speed of 120km/h in Korea. Because R-Bar has advantages of reduction of tunnel cross sectional area and maintenance, its development for more high-speed is urgent in Korea having many mountain area. Therefore a sensitivity analysis of design parameters for the speed-up of R-Bar has performed in this study. For the analysis, we have developed a program for the prediction of dynamic characteristics between a pantograph and R-Bar. The program was evaluated with the actual test result and a current collection performance according to the parameters such as a distance between brackets, a stiffness of bracket and of R-Bar rail was predicted with the program.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.06b
• /
• pp.327-332
• /
• 2007

버퍼캐시에서 선반입은 교체정책과 함께 중요한 성능 향상 기법 중의 하나이다. 하지만 참조 패턴의 특성에 따라서는 선반입을 수행하면 오히려 전체 수행시간을 증가시키는 경우도 보고된 바 있다. 본 논문에서는 참조 패턴을 탐지하고 탐지된 패턴에 적절히 대응하여, 선반입의 이익은 유지하되 성능에 악영향을 미치지 않는 선반입 기법으로 순환 참조 선반입을 제안한다. 성능 평가를 위해서 리눅스에서 현재 사용되고 있는 미리 읽기 선반입과 순환 참조 선반입의 수행 시간을 비교했다. 다양한 참조 패턴을 가지는 트레이스들에 대한 시뮬레이션 성능 평가 결과, 순차 참조를 많이 포함하는 트레이스에 대해서는 순환참조 선반입이 리눅스의 미리 읽기 선반입과 유사한 정도의 $3\sim5%$ 성능향상을 보였다. 뿐만 아니라, 미리 읽기 선반입 정책을 적용했을 때 오히려 40% 가량의 성능 악화를 초래하는 특정 트레이스에 대해서도 순환 참조 선반입을 적용할 경우 0.07%의 아주 미미한 성능 저하만을 유발하였다. 본 연구에서 제안하는 순환 참조 선반입 기법은 이득이 있을 때만 적극적인 선반입을 수행하여 시스템 성능을 향상시키며, 손해가 발생할 때는 선반입을 중지하여 시스템 성능 악화를 방지함을 실험을 통해 알 수 있다.

• Proceedings of the KAIS Fall Conference
• /
• 2004.06a
• /
• pp.270-274
• /
• 2004

군포시는 인구 27만 376명(2001)의 도시로서 녹지지역, 공업지역, 주거지역, 상업지역이 혼재되어 있는 복합기능의 기존 도시지역과 최근의 도시계획에 의하여 도시기능들이 분리되어 있는 신도시지역으로 구성되어 있어서 전체적으로 복합도시의 성격을 갖고 있다. 이러한 특성으로 인하여 지역별 환경오염의 정도가 다르게 나타나고 있다. 따라서 본 연구는 군포시 환경현황을 알아보기 위해 17개 지점의 퇴적토와 16개 지점의 약수터를 선정하여 군포시의 환경문제 가운데 하상퇴적물과 음용수로 사용하고 있는 약수터의 수질환경 변화를 월별로 비교$\cdot$분석하였다. 그 결과 휘발성고형물(VSS)은 도시권 영역인 당정천 지역(9,10)에서 높은 농도를 보였으며, 영양염류의 지표인 총질소(T-N)와 총인(T-P)의 경우 생활하수의 직접적인 영향을 받고 있는 15지점이 T-N 12.2mg/kg, T-P 6.09mg/kg의 농도를 보이고 있으며 중금속의 농도는 공업지역 부근인 3,9,10지점에서 납의 농도가 다른 중금속에 비하여 높은 것으로 조사되었다. 약수의 경우 모든 음이온 항목이 먹는물 수질기준을 만족하고 있으므로 건강상 유해한 영향이나 심미적인 영향을 미치지 않을 것으로 사료된다.

• The KIPS Transactions:PartD
• /
• v.11D no.2
• /
• pp.453-460
• /
• 2004

In this thesis, remote conveyor control and monitoring system is designed and Implemented for shoes production process based on Lego prototyping mechanism by using the I/O interface control board for the ISA Interface control board. A conveyor server for real time profess control is implemented based on RTLinux(Real-Time Linux) so that users deride priority of work. And device driver is implemented bated on the RTLinux. Through this system, real-time Client/server monitoring environments Is implemented and tested. And the JMF(Java Media Framework) based monitoring system was implemented and the total processing status war monitored.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.3
• /
• pp.241-247
• /
• 2007

This paper presents a new Leading edge modulation Buck converter operating in discontinuous conduction mode (DCM) for the pulse voltage input. In the slave output of the LLC half-bridge multi-resonant converter, to regulate the direct chopper's output voltage, its PWM switch is controlled by the leading edge modulation. The principles of this proposed LEM control method and the fast dynamics in inductor current based on the converter impulse response are studied. The theoretical results are verified through an experimental prototype of the 100W 60inch PDP Address power module.

• The KIPS Transactions:PartD
• /
• v.13D no.5 s.108
• /
• pp.683-690
• /
• 2006

The CBAM (Cost Benefit Analysis Method) provides a method for deciding the best architectural strategy by considering cost, schedule, and risks as well as the benefits of the architectural strategy. But many parts of the CBAM do not Present quantitative evidence explicitly on whether it is the best architectural strategy among others because it depends on the stakeholders' consensus, vote, and/or intuition. In this study, we apply the AHP (Analytic Hierarchy Process) to CBAM to provide explicit quantitative evidence and to reduce the possibility of subjective decision-making errors that may occur in the CBAM.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.612-614
• /
• 1993

Sputtering requires a way to bombard the target with sufficient momentum. Positive ions are the most convenient source since their energy and momentum can be controlled by applying a potential to the target. Although many types of discharges have been used for sputtering, magnetrons are now the most widely used because of the high ion current densities. Namely, plasma near the target electrode is confined by magnetic field using permanent magnet, so that the collision probability is increased. It is important to develop RF magnetron sputtering system which has many excellent merits compared with conventional methods. Our study aims to develop 1 kW RF source(13.56 MHz, TR type) and to accumulate the design and construction technology of RF magnetron sputter-deposition system. We developed 1 kW RF sputtering system to deposit thin film. These films are deposited by this RF source matched by auto-matching system using primarily argon gas. Target of Au, Ni, Al, and $SiO_2$ was well deposited on the argon pressure of 5-10 mTorr.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.10
• /
• pp.1426-1431
• /
• 2015

Piezoelectric pump can be considered as R-C load and it needs something special driver because the output voltage does not become 0 even though the applied voltage is 0 with common converter. This operating system consists of fly-back converter to increase the input voltage and energy recovery inverter to apply square voltage to the piezoelectric pump. The energy recovery inverter can charge and discharge the energy of capacitive load. In this paper, to enhance performance of the driver, a few elements or circuits are added and modified. To drive the inverter safely, current limit resister is added and adjusted the value to valance the charging and discharging current. In addition, a current limit inductor is added to the input side to limit the input current and enhance the efficiency. Inductor only may make oscillation and another resister is added parallel to the inductor to solve this problem. The converter and inveter are assembled to one board for compactness. The appropriateness is proved with simulation and experiments.

• Journal of Korean Medical Ki-Gong Academy
• /
• v.19 no.1
• /
• pp.99-115
• /
• 2019

Introduction : In patient with ankylosing spondylitis, when bone formation progresses, spinal fusion occurs and joint motion is severely limited. We performed Medical Gi-gong and Korean medical therapies in patient with advanced ankylosing spondylitis with spinal fusion. Case : 46-year-old male with extensive spinal fusion at the cervical and lumbar spine complains of back pain, hip pain, joint stiffness, eye pain, and digestive problems. HLA-B27 (+), mSASSS is 70. Medical Gi-gong was done 311 days for 340 days. Acupuncture, cupping, and manual treatment were performed once every 5.9 days for one year. BASDAI improved from 5.3 to 4.3, BASFI from 4.3 to 3.7, and BASMI from 6.8 to 5.8. mSASSS did not change. Conclusions : Patients with advanced ankylosing spondylitis were treated with Medical Gigong and Korean medical therapies to achieve a slight improvement.