• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1673-1679
• /
• 2009

Korean railroad company is continuously improving the service for the disabled. They also install and reform many facilities for them. However, They didn't consider the egress of the disabled when fire occurred until today. At present, fire hazard analysis and risk assessment are introduced into Korea regulation for improving fire safety performance of train car and railroad facilities. Fire safety evaluation for the railroad conducted in Korea didn't generally consider the disabled. In the present situation, the study for the egress of the disabled in train car was needed. The egress experiment was conducted to measure the movement speed of the disabled who didn't walk or walk very slow.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.73-76
• /
• 2009

LCA is nowadays getting popular as a tool to assess the environmental impacts. We can assess the environmental impacts of products and also compare the environmental performance between products with LCA. Furthermore, the LCA results can be used for designing eco-friendly products. But LCA needs an enormous amount of data collection, calculations of energy and material balance. which required to spend pretty much time and cost. However, If we use Input-Output Analysis, There is a lot of advantages that we can save time and cost to calculate and also analyze energy-material balance more comprehensively. Therefore, we implemented the fundamental research of the environmental impact assessment on railway system using life cycle inventory analysis and Input-Output Analysis method.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.7
• /
• pp.1003-1010
• /
• 2002

Caspase 3, a member of cysteine protease family, is well known as a major apoptosis effector and is involved in cell death as a result of ischemic diseases such as stroke and myocardial infarction, therefore the inhibition of caspase 3 may protect those apoptotic cell damages. During the high-throughput screening of the compounds from the Korea Chemical Bank, berberine derivatives (A and B), an isoquinoline alkaloid, have been identified as potential inhibitors for caspase 3. Based on this finding we carried out molecular modeling study to identify the pharmacophoric elements of berberine structure which interact with a substrate-recognition binding site of caspase 3 and came up with several novel scaffolds. In this report, we will discuss the molecular modeling, syntheses and the enzyme inhibitory activities of these novel compounds.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.1
• /
• pp.121-129
• /
• 2011

The concept of bio-housing comes from the new social and culture housing trends. Previous research have shown standards on performance criteria for bio-housing. However some criteria on that research were overlapped because they were merged from various current housing assessment systems. This current research looks on the duplication of criteria which were impossible to evaluate current housing assessment, and make specialized factors for bio-housing developments. Finally the research shows the magnitude of factors for bio-housing performance criteria.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.10 s.241
• /
• pp.1307-1314
• /
• 2005

The most important factor of the traffic accident on the wet road is a tire slip caused by hydroplaning. Meanwhile, hydroplaning characteristics are influenced very greatly by the vehicle velocity, so it is very important to reveal the relation between hydroplaning and the vehicle velocity. Since the experiment study is considerably limited, recently the numerical simulation using finite element method(FEM) and finite volume method(FVM) is widely adopted. In this paper, the effect of the vehicle velocity on the hydroplaning characteristics is investigated through the hydroplaning analysis using MSC/Dytran.

• Proceedings of the SAREK Conference
• /
• 2003.07a
• /
• pp.154-154
• /
• 2003

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.300-300
• /
• 2013

세계전자제품의 부품산업은 21세기 정보화 사회와 함께 IT 산업에서 급성장으로 인해 부품의 소형화, 경량화, 친환경화가 요구되고 있다. IT 산업에서 리드스크류(Leadsrew)는 마이크로 구동부품중의 이송장치를 구성하는 핵심 부품으로 탄소강과 합금강 및 스테인레스강 등이 사용되고 있다. 탄소강은 성형 가공성과 원가 절감에 최적의 소재로서 낮은 표면 경도로 인한 내마모성 저하와 부식 분위기에서의 내식성이 떨어지는 단점을 가지고 있다. 본 연구에서는 탄소강(S20C:${\oint}30{\times}h10$)을 이용하여 플라즈마 질화 표면처리를 통해 표면경도와 내마모성 향상 및 내식성을 높이는 연구를 수행하였다. 연구 방법으로 플라즈마 연질화 공정과 Post Oxidation 공정을 개발하였고, 질화 처리된 시험편에 대해 마이크로 비커스 경도, OEM&SEM, XRD 분석 및 염수분무(KS D 9502) 시험으로 특성을 분석하였다. 연구 결과로 탄소강(S20C)은 마이크로 비커스 경도 분석으로 표면 경도가 600Hv0.025 이상과 염수분무 시험으로 내식성은 24시간 이상의 결과를 얻었다.

• Korean Journal of Microbiology
• /
• v.29 no.1
• /
• pp.40-48
• /
• 1991

Two malonate-specific enzymes, malonyl-CoA synthetase and malonamidase, were found in free-living cultures of Rhizobium japonicum, Rhizobium meliloti, and Rhizobium trifolii, that infect plant roots where contain a high concentration of malonate. Malonyl-CoA synthetase catalyzes the formation of malonyl-CoA, AMP, and PPi directly from malonate, coenzyme A, and ATP in the presence of $Mg^{2+}$ Malonamidase is a novel enzyme that catalyzes hydrolysis and malonyl transfer of malonamate, and forms malonohydroxamate from malonate and hydroxylamine. Both enzymes are highly specific for malonate. These results show that Rhizobia have enzymes able to metabolize malonate and suggest that malonate may be used in symbiotic carbon and nitrogen metabolism.

• Proceedings of the Korea Contents Association Conference
• /
• 2012.05a
• /
• pp.405-406
• /
• 2012

이 연구는 여자 창던지기 선수들의 투사요인, 창 각의 특성과 기록과의 관계를 통해서 기록에 미치는 영향을 분석한 것이다. 투사요인 중 투사높이와 투사속도가 기록과 정적 관계를 보이면서 릴리즈순간 투사높이가 높고, 투사속도가 클수록 기록이 좋은 것으로 나타났다. 특히 창 각과 관련된 자세각과 공격각의 경우 기록과 낮은 관계를 보인 반면에 요 각은 기록과 정적 관계를 보여 릴리즈 순간 0보다 큰 각도에서 릴리즈가 이루어져야하는 것으로 나타났다.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.761-762
• /
• 2006

W-Cu alloy was very useful material for a heat sink, high electric contact and EDM electrode. Powder injection molding (PIM) is the optimum manufacturing technology to provide W-Cu components with low-cost and high-volume. We used various compositions of tungsten coated copper powders (W-Cu with 10 to 80 wt-% of copper) to manufacture W-Cu components by PIM. The optimum mixing, injection molding, debinding and sintering conditions to provide the high performance W-Cu components were investigated. The thermal and mechanical properties of W-Cu parts by PIM were measured. Finally, we can verify the high performance of W-Cu components by PIM with the tungsten coated copper.