• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.1075-1078
• /
• 2005

In this paper, we propose a simple middleware for ubiquitous computing systems. Developed with UPnP in Java, it efficiently organizes runtime interactions of devices. To show the feasibility of this system, we implemented a set of customized services based on this middleware. This prototype allows users to enjoy services at various spatial points even while moving around.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.929-932
• /
• 2005

We report a pull-up type RF MEMS switch using double electrode without elastic deformation of the cantilever involved in the actuation. At a voltage of 4.5 V, reliable actuations are achieved such that the movable lower contact pad is pulled up by the electrostatic force to make contact with the upper pad. At a frequency of 50 GHz, an insertion loss of 0.7 dB and an isolation of 50.7 dB are obtained from the switch. The measured transient times for switch-on and switch-off are 120 and 80 us, respectively.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.829-832
• /
• 2005

This paper describes a wide-range dual-loop Delay Locked Loop (DLL) using Voltage Controlled Delay Line (VCDL) based on Transmission Gate(TG) inverters. One loop is used when the minimum VCDL delay is greater than a half of $T_{REF}$, the reference clock period. The other loop is initiated when the minimum delay is less than $0.5{\times}T_{REF}$. The proposed VCDL improves the dynamic operation range of a DLL. The DLL with a VCDL of 10 TG inverters provides a lock range from 70MHz to 700MHz when designed using $0.18{\mu}m$ CMOS technology with 1.8 supply voltage. The DLL consumes 11.5mW for locking operation with a 700MHz reference clock. The proposed DLL can be used for high-speed memory devices and processors, communication systems, high-performance display interfaces, etc.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.211-214
• /
• 2000

본 논문은 전자파 장해 및 복사내성 측정의 대용 시험시설로 활용될 수 있는 전자파 잔향실의 전자기장 특성에 관하여 연구하였다. 전자파 잔향실 내부 균일성을 확보하기 위하여, 음향효과의 극대화를 위해 인간의 가청 주파수대인 16-20,000Hz 범위, 음속(340 m/sec)에 적용하여 활용되고 있는 Shroeder Quadratic Residue Diffuser를 무선 주파수 대역 30 KHz -3 THz인 범위로 확장, 3가지 형태의 Diffuser를 설계하여 잔향실 내부에 적용하였다. FDTD(Finite-Difference Time-Domain) 수치해석 방식을 이용하여 잔향실 내부의 필드 특성을 조사한 결과 Diffuser를 부착한 3 가지 형태 모두 치대 tolerance $\pm$3dB 이내의 필드 균일도를 나타내었으며, Type 3, 대칭형 구조의 Diffuser 형태가 효율이 가장 우수하다는 결과를 나타내었다.

• Journal of Korean Association for Spatial Structures
• /
• v.16 no.3
• /
• pp.67-78
• /
• 2016

Determining of the shape in the process of design for natural draught cooling tower is very important, because the shape of hyperbolic shell is respond sensitively to dynamic behavior of the whole cooling tower against wind load. In engineering practice, the geometric parameters have been determining based on the natural frequency. This study analyses influence of the tower shell geometric parameters on the structural behavior. For three representative models were selected, they were analyzed based on evaluation of damage by means of nonlinear FE-method. As a result, a hyperbolic rotational shell with the small radius overall was the lowest damage index induced by sufficient capacity of the stress redistribution and thus a wind-insensitive structure.

• Journal of Power System Engineering
• /
• v.21 no.1
• /
• pp.18-23
• /
• 2017

The Stokes waves representing the deep sea waves are expressed as a superposition of several linear waves. To evaluate the motions of floating bodies in the deep seas, it is necessary to evaluate the motions of the bodies in the Stokes waves. The 5th-order Stokes waves are expressed as a superposition of 5 linear waves. Therefore, the motion responses of the bodies in the Stokes waves would be expressed as a superposition of the motion responses of the bodies in the each linear waves. In this research, The experimental results were compared with the numerical results in linear waves and Stokes waves.

• Journal of Astronomy and Space Sciences
• /
• v.32 no.4
• /
• pp.395-401
• /
• 2015

We investigated the six remaining Yang-cheon-cheoks (量天尺), which were first described in the Veritable Record of King Sukjong (肅宗實錄). These woodblock sundials from Korea are structurally very similar to a Gyupyo (圭表, gnomon) or an altitude sundial and are light, compact, and portable. The front side of a Yang-cheon-cheok has two holes for styluses and several hour-lines. We compared the intervals of the hour-lines from the originating point of the stylus placement on all Yang-cheon-cheoks and found that two of the relics had the same hour-lines using the standard of the unit of 1 chon (寸). These two were actually the same sundial although the physical size was different. In spite of the lack of time accuracy, we hypothesize that various-sized Yang-cheon-cheoks were made and widely distributed throughout the public in the late Joseon Dynasty.

• Proceedings of the KIPE Conference
• /
• 2011.11a
• /
• pp.14-15
• /
• 2011

본 논문에서는 단상입력을 가지고, 직류단에 소형 캐패시터를 사용하는 인버터를 사용해 3상 전동기 가변속 구동을 한다. 이때 주기적으로 크게 맥동하는 직류단 전압 조건에서 어떻게 전동기를 제어하는가에 대해 언급한다. 평균 전압 제한원을 전류 영역에 표현하고, 새로운 약자속 영역을 정의한다. 이를 바탕으로 전류 지령을 생성하는 제어기를 구성하여 전동기를 제어할 수 있는 기법을 제안하고 이를 실험을 통해 검증한다. 이를 통해 입력 전류의 고조파를 줄여 역율도 개선할 수 있다.

• Journal of the Korean Applied Science and Technology
• /
• v.8 no.1
• /
• pp.85-89
• /
• 1991

The thermodynamics of micellization of a new series of ionic surface-active agents, dimethyl alkyl-2-deoxy-2-epi-inosityi-ammonium chlorides, has been examined, A minimum in the critical micelle concentration versus temperature has been observed at $25^{\circ}C$ It has been found that the standard entropy of micellization is always positive showing that miceliization is governed by the gain in entropy associated with the removal of the monomer from an aqueous environment to the micelle over a $15^{\circ}C$ to $45^{\circ}C$ temperature while governed by enthalpy directed process below $25^C{\circ}$.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.25.1-25.1
• /
• 2009

The effects of surface energyon the wetting transition for impinging water droplets were experimentally investigated on the chemically modified WOx nanowire surfaces. We could modify the surface energy of the nanostructures through chemisorption of alkyltrichlorosilanes with various carbon chain lengths and by the UV-enhanced decomposition of self assembled monolayer (SAM) molecules chemically adsorbedon the array. Three surface wetting states could be identified through the balance between antiwetting and wetting pressures. This approach establishes simple strategy for the design criteria for water-repellent surface to impinging droplets.