• Journal of Integrative Natural Science
• /
• v.6 no.4
• /
• pp.215-219
• /
• 2013

In this study, in order to investigate how consecutive treatments of glass surface with HF acid and water vapor/Ar plasma affect the quality of 3-aminopropyltriethoxysilane self-assembled monolayer (APS-SAM), poly(3,4-ethylenedioxythiophene) (PEDOT) thin films were vapor phase-polymerized immediately after spin coating of FeCl3 and poly-urethane diol-mixed oxidant solution on the monolayer surfaces prepared at various treatment conditions. For the film characterization, various poweful tools were used, e.g., FE-SEM, an optical microscope, four point probe, and a contact angle analyzer. The characterization revealed that a well prepared APS-SAM on a glass surface treated with water vapor/Ar plasma is very useful for uniform coating of FeCl3 and DUDO mixed oxidant solution, regardless of HF treatment. On the other hand, a bare glass surface without APS-SAM but treated with HF and water vapor/Ar plasma generally led to a very poor oxidant film. As a result, PEDOT films vapor phase-polymerized on APS-SAM surfaces are far superior to those on bare glass surfaces in the quality and electrical characteristics aspects.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.858-860
• /
• 2009

We have applied self-assembled monolayer to make high performance and stable OTFT on the organic gate dielectric. The ${\beta}$-phenethyltrichlorosilane (SAM) was coated on the organic gate dielectric and then active layer was printed. Significant improvements in on-currents and threshold voltage shift were achieved for the SAM treated devices compared to device without SAM.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.219-219
• /
• 2007

Ni stamper위에 100nm의 Si 코팅후 자기조립 단문자막(SAM)을 액상 코팅방식으로 형성 하였고, 내구성 및 열적 안정성을 검증하기 위해 반복적인 이형 및 압력인가test가 실시하였다. 20 회 이상의 이형실험을 통해 열적, 기계적 안정성을 확인하고, 접촉각 측정을 통해 이형특성의 안정성도 고찰하였다. 이를 Imprint공법을 적용 fine pattern의 구조물을 얻을수 있었다. SAM코팅은 TRICHLOROSILANE을 사용하였으며 Hexane과 1000:1의 비율로 섞어서 stirrer에서 mixing하는 방식을 사용했으며, UV-ozone처리를 통한 이형성 제거 효과도 관찰하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.209-209
• /
• 2007

Ni stamper위에 100nm의 Si 코팅후 자기조립 단분자막(SAM)을 액상 코팅방식으로 형성 하였고, 내구성 및 열적 안정성을 검증하기 위해 반복적인 이형 및 압력인가 test가 실시하였다. 20회 이상의 이형실험을 통해 열적, 기계적 안정성을 확인하고, 접촉각 측정을 통해 이형특성의 안정성도 고찰하였다. 이를 Imprint공법을 적용 fine pattern의 구조물을 얻을 수 있었다. SAM코팅은 TRICHLOROSILANE을 사용하였으며 Hexane과 1000:1의 비율로 섞어서 stirrer에서 mixing하는 방식을 사용했으며, UV-ozone처리를 통한 이형성 제거 효과도 관찰하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.409-414
• /
• 2005

In the literatures, the FFT-based SAM has been well applied to the computation of the steady-state responses of discrete dynamic systems. In this paper, a fast fourier transforms (FFT)-based spectral analysis method (SAM) is proposed fur the dynamic analysis of spectral element models subjected to the non-zero initial conditions. However, the FFT-based SAM has not yet been developed for the continuous systems represented by the spectral element model.

• Proceedings of the KIEE Conference
• /
• 1998.11c
• /
• pp.973-975
• /
• 1998

Many researchers make efforts to develop an effective material with anti-degradation property. Specially, the porcelain type insulator is required exchanging to polymer insulator according to the environmental consideration. In this paper, we have developed the estimation system using the PD & SD testing. Those approach has been very successful applied to the various practical insulator.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.30-31
• /
• 2006

In a multi-action tooling system, which is usually used for the powder compaction process to fabricate the complex multilevel parts, crack formation is crucially detrimental and should be avoided. Among various process factors, tool shape is an important factor to prevent the crack formation during powder compaction process. In this work, the effects of different tool shapes were investigated through the experimental oberservation of pore distribution in real products and the finite element analysis of residual stresses. The results were interpreted based on non-uniform powder density in the compacted parts.

• Journal of Environmental Policy
• /
• v.12 no.1
• /
• pp.101-123
• /
• 2013

This research aims to find out the existence of considerable induced effect that the conventional I-O model cannot. First, we construct an environmental Social Accounting Matrix for Korea by combining statistics on the Korean GDP and I-O with physical data on the fossil energy consumption and $CO_2$ emissions. The impacts of productive activities on fossil energy consumption and $CO_2$ emissions are evaluated by calculating the e-SAM multipliers. By applying decomposition technique further, we get direct, indirect, and induced effects of production activities by industry. The result of decomposing the e-SAM shows that while the direct effect of the electricity industry is large, its indirect effect is very small. In the case of the primary metal industry, both the direct and the indirect influence of this industry were very large. On the contrary, in case of the service industry, the induced effect of fossil energy consumption was as high as 50% of the gross effect. These results suggest that different energy policies should be established for different industries. Also, the findings show the e-SAM model is better than I-O model in analyzing implications of policies on energy use in the economy.

• Korean journal of communication and information
• /
• v.35
• /
• pp.329-361
• /
• 2006

This study focuses those periods of Kim Young-Sam and Kim Dae-Jung administration. This study tries to analyze any change in terms of ideological tendency and report attitude on the assessment of the government policy in the Korean newspapers from Kim Young-Sam to Kim Dae-Jung administration. Although these two civilian regimes were born after long periods of military dictatorship, there are many distinguished differences dividing these two. Kim Young-Sam could succeed through joining with the establishment of the power, while Kim Dae-Jung was elected as President through the horizontal shift of the power, opposition party becoming ruling party. Their power base was different. Another big difference is their North Korea policy. Kim Young-Sam administration's policy was conservative, while Kim Dae-Jung administration's policy was liberal. This study selected four Korean newspapers that represent each aspect of ideological spectrum in Korean media, and focused on the editorials of each paper as major analysis base. The four papers are Dong-a Ilbo, Chosun Ilbo, JoongAng Ilbo, and Hankyoreh. The study concludes that in terms of the report attitude on the assessment of the government policy, Dong-a, Chosun, JoongAng were more critical under Kim Dae-Jung administration than Kim Young-Sam administration. And Hankyoreh became more supportive of Kim Dae-Jung policy. In terms of the ideological tendency, four newspapers altogether did not change their ideological color regardless of the change in the administration. However conservative color became thinner( Dong-a, Chosun, JoongAng) and liberal color became thicker(Hankyoreh) a little under Kim Dae-Jung administration than Kim Young-Sam administration. Each newspaper tried to show their ideological tendency clearly in order to influence on government policy.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.8
• /
• pp.671-675
• /
• 2014

Nozzle ring is an important part of turbocharger which is applied to today's most diesel engines. Turbo charger nozzle ring is difficult to process and takes a high cost and a long time relatively. For this reason, it is largely produced by using a precision casting. Investment method, the representative technology of precision casting, has excellent dimensional accuracy and can produce complex shapes relatively easily. However, it is difficult to avoid the casting defects such as shrinkage cavity and short shot. This study is to predict the casting defects which could be occurred during the investment method by use of finite element analysis software and to design the process and mold of the marine turbocharger nozzle ring.