• Title/Summary/Keyword: Lee Ha-Bok

Search Result 446, Processing Time 0.038 seconds

Growth, Yield and Grain Quality of Rice Affected by Application of Crab Shell, Sericite Ore, and Charcoal Powders (게 껍질, 견운모 및 숯 분말이 벼의 생육, 수량 및 쌀의 품질에 미치는 영향)

  • Lee, Suk-Soon;Lee, Mun-Joung;Kim, Bok-Jin;Hong, Seung-Beom
    • Korean Journal of Environmental Agriculture
    • /
    • v.24 no.2
    • /
    • pp.185-190
    • /
    • 2005
  • An experiment was conducted to know the effects of crab shell, sericite ore, and charcoal powders on the growth, yield, and grain quality of rice. After application of 110-40-57 kg/ha of $N-P_2O_5-K_2O$, 3,000 kg/ha of crab shell and charcoal powders and 5,000 kg/ha of sericite ore powder were applied and incorporated into soil before transplanting of rice seedlings. The number of tillers and panicles, leaf area index at heading stage, N concentration of plants, and protein content and chalkiness of rice grains were increased with the application of crab shell powder, while the percentage of ripened stains and head rice and Toyo taste value were decreased. The yield of milled rice and other grain appearance and chemical and physical properties of rice grains were not affected by the application of crab shell powder. The sericite ore and charcoal powders increased protein content decreased Toyo taste value, but did not affect on the growth, yield and yield components and other grain qualities.

Effect of Chicken Manure Compost Application on the Growth of Vegetables and Nutrients Utilization in Upland Soil (계분퇴비 시용이 채소류 생육과 양분이용율에 미치는 영향)

  • Kim, Jong-Gu;Lee, Kyeong-Bo;Lee, Deog-Bae;Lee, Sang-Bok;Kim, Seong-Jo
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.31 no.2
    • /
    • pp.177-182
    • /
    • 1998
  • To evaluate the effect of chicken manure compost(CMC) application on nutrient utilization and reduction of N fertilizer application for vegetables such of cabbage, reddish, and eggplant, four different application rates of CMC such as 0, 10, 30. $50Mg\;ha^{-1}$ were amended with three different rates of chemical fertilizer of 0, 15, $300kg\;ha^{-1}$. The efficiency of nutrient utilization on CMC were in the order of N, P, K. For each respective nutrient utilization by cabbage, reddish, and eggplant, N were 29%, 20%, 14%; P were 10%,<1%, and <1% ; K were 5%, 22%, 32%. The greater application of CMC, the less the efficiency, while the efficiency of P was increased with increasing application of CMC. The highest efficiency of nutrient utilization was found in $10Mg\;ha^{-1}$. The amounts of reduction of N fertilizer application in soils amended with $10Mg\;ha^{-1}$ of CMC with respect to maintain the normal production of each vegetables observed in this experiment were as follows: $25kg\;ha^{-1}$ and $15kg\;ha^{-1}$ less, and $13kg\;ha^{-1}$ more than the recommended rate for cabbage, eggplant, and reddish, respectively. For elution of available of N by the application of CMC, there was a gradual increase up to 30 day, then gradually decreased. However, there was increase of N eluted in the application of $50Mg\;ha^{-1}$. For soil chemical properties, pH, T-N, OM, and $P_2O_5$ were increased with increased application of CMC, as well as did cations such as K, Ca, and Mg. Yield and glucose of cabbage was significantly increased at the application of $30Mg\;ha^{-1}$ CMC, but content of nitrate in eggplant and raddish was highly increased with increasing application of N fertilizer and CMC. By the way, the yields of cabbage, reddish, and eggplant were slightly decreased with CMC application greater than $50Mg\;ha^{-1}$.

  • PDF

Reducing Nitrogen Fertilization Level of Rice (Oryza sativa L.) by Silicate Application in Korean Paddy Soil (논토양에서 규산질 비료 시용에 의한 질소 시비 저감수준 평가)

  • Lee, Chang-Hoon;Yang, Min-Suk;Chang, Ki-Woon;Lee, Yong-Bok;Chung, Ki-Yeol;Kim, Pil-Joo
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.38 no.4
    • /
    • pp.194-201
    • /
    • 2005
  • Silicate (Si) fertilizers are well-known for soil amendment and to improve rice productivity as well as nitrogen efficiency. In this study, we investigated the possible reduction level of nitrogen fertilization for rice cultivation by amending Si fertilizer application. Field experiments were carried out to evaluate the productivity of rice (Oryza sativa L.) on a silt loam soil, where three levels of nitrogen (0, 110 and $165kg\;ha^{-1}$) were selected and Si fertilizer as a slag type was applied at 0, 1 and 2 times of the recommendation level (available $SiO_2\;130mg\;kg^{-1}$). Application of Si fertilizer increased significantly the rice yield and nitrogen efficiency. With increasing N uptake of rice, 1 and 2 times of recommended levels of Si fertilization could decrease nitrogen application level to about 76 and $102kg\;N\;ha^{-1}$ to produce the target yield, the maximum yield in the non-Si amended treatment. Silicate fertilizer improved soil pH and significantly increased available phosphate and Si contents. Conclusively, the Si fertilizer could be a good alternative source for soil amendment, restoring the soil nutrient balance and to reduce the nitrogen application level in rice cultivation.

Preference of the View from Apartment Units regarding View Points (조망 시점 위치에 따른 아파트 단위세대 조망 경관 선호 특성)

  • Moon, Ji-Won;Lee, Sang-Bok;Ha, Jae-Myung
    • Proceeding of Spring/Autumn Annual Conference of KHA
    • /
    • 2006.11a
    • /
    • pp.242-247
    • /
    • 2006
  • This study is intended to analyze the characteristics of the preference according to the locations of view points, which are the current criteria for the evaluation of the view. To this end, a total of fifty one test cases according to view point locations were sampled based on the picture data collected in previous studies, and preference assessment was conducted on these cases to identify preference characteristics, where a five-point Lickert-scale evaluation was performed for each test case, and three test cases for each type were comparatively evaluated. It is deemed that the findings from this study may be used to finally derive qualitative assesment scale for the view seen from apartment units.

  • PDF

Design and Control of Railway Vehicle Suspension System Featured by MR Damper (MR 댐퍼를 적용한 철도차량 현가장치의 설계 및 제어)

  • Ha, Sung-Hoon;Choi, Seung-Bok;Lee, Kyu-Seob
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2010.10a
    • /
    • pp.71-76
    • /
    • 2010
  • This paper presents the feasibility for improving the ride quality of railway vehicle equipped with semi-active suspension system using magnetorheological(MR) fluid damper. In order to achieve this goal, a fifteen degree of freedom of railway vehicle model, which includes a car body, bogie frame and wheel-set is proposed to represent lateral, yaw and roll motions. The MR damper system is incorporated with the governing equation of motion of the railway vehicle which includes secondary suspension. To illustrate the effectiveness of the controlled MR dampers on railway vehicle secondary suspension system, the sky-hook control law using the velocity feedback is adopted. Computer simulation for performance evaluation is performed using Matlab. Various control performances are demonstrated under external excitation which is the creep force between wheel and rail.

  • PDF

A Study on the Application of the Digital Architecture Model Fabrication for Digital Design Education (디지털 설계교육을 위한 디지털 건축모형제작 기술 적용에 대한 연구)

  • Ha, Seung-Beom;Lee, Kang-Bok
    • Journal of The Korean Digital Architecture Interior Association
    • /
    • v.12 no.1
    • /
    • pp.25-33
    • /
    • 2012
  • Ever since the local interior and architecture design industry adopted Digital fabrication modeling tool for its design operation in early 1990's, working environment has been changing. The Purpose of study is to analyze the digital Architecture fabrication modeling for digital design education in academy course. Digital Design Tools, Digital Space and Form, Digital Materiality and Digital Production. The Digital fabrication modeling is and important role in a traditional design process and digital design process. It is comprised of digital input devices(3D digitizer, 3D design tools) and digital output devices(cutting plotters, laser cut, CNC machines, 3D printers). Digital input devices can be shift a traditional design process to digital design process. Digital output devices are the principle of digital fabrication by CAD/CAM. Also, the result of this study provide the fundamental data for physical resources and digital design curriculum in KAAB.

Characteristics of Friction Factor for Artificially Roughened Surfaces (임의로 거칠게한 표면의 점성 마찰특성)

  • Ha, Tae Woong;Ju, Young Chan;Lee, Yong-Bok;Kim, Chang-Ho
    • 유체기계공업학회:학술대회논문집
    • /
    • 2002.12a
    • /
    • pp.465-470
    • /
    • 2002
  • For measuring friction-factor of artificially-roughened surfaces which are usually applied on damper seals, flat plate test apparatus is designed and fabricated. the measurement of leakage and pressure distribution through round-hole pattern specimen with different hole area is described and a method is discussed for determining the friction-factor experimentally. Results show that the friction-factor of the round-hole pattern surfaces is bigger than that of smooth surface and increases as increasing the hole area. A empirical friction factor model for round-hole pattern surface is defined as the Moody's friction factor formula.

  • PDF

Improvement and Application Effect in Fault Restoration Program based on Distribution Automation System of KEPCO (한전의 배전자동화 기반 배전선로 고장처리 프로그램 개선 및 적용 효과)

  • Park, So-Young;Shin, Chang-Hoon;Ha, Bok-Nam;Lee, Seong-Woo;Park, Min-Ho
    • Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
    • /
    • 2009.10a
    • /
    • pp.267-271
    • /
    • 2009
  • This paper presents the improvement and application effect in fault restoration program based on distribution automation system(DAS) of KEPCO. When a fault occurs, fault restoration program can detect fault section based on FI information of DAS, and calculate the best restoration solution by comparing the load capacity of outage area and the spare load capacity of connected distribution lines, and propose switch operating procedure for fault section isolation and outage restoration. Fault restoration program was applied to real field and it was verified that this program is applicable to diverse field cases. By using this fault restoration program to the field human error can be reduced and fault procedure can be more reliable, accurate, and fast.

  • PDF

Building overview of Power IT field test plant (전력IT 실증플랜트 구축 현황)

  • Lee, Sung-Woo;Ha, Bok-Nam;Seo, In-Yong;Jang, Moon-Jong;NamKoong, Won
    • Proceedings of the KIEE Conference
    • /
    • 2011.07a
    • /
    • pp.481-483
    • /
    • 2011
  • 전력IT 성과물인 지능형송전, 능동형텔레메트리스, 디지털 변전, 배전지능화 시스템의 데이터를 CIM 기반의 국제 표준 프로토콜을 사용하여 취득할 SPG 주장치인 PGOMS를 구축하였다. 또한 전력계통의 안정도를 평가하는 위기관리시스템, 계통전압이 정격 범위내에서 유지되도록 발전기 출력 등을 자동제어하는 VMS(Voltage Management System)시스템. 송전선로용 볼센서, 변전소 주변압기 열화감시용 센서, GIS(Gas Insulation Switchgear) 감시용 센서 등을 사용하여 전력기기의 열화감시를 온라인 감시하는 능동형텔레메트릭스 시스템. 변전소내의 보호계전기와 제어부, 통신부가 통합된 (IED: Intelligent Electronic Device)기반의 디지털 변전시스템. 변전소 SCADA와 배전자동화를 하나의 시스템에서 처리하고, 분산전원을 통합 운영할 수 있는 배전지능화 시스템을 구축하였다.

  • PDF