• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.8
• /
• pp.700-705
• /
• 2013

If LED lighting is to be used in home networking, a home gateway and power line communication are needed in delivering data. In addition, an appropriate multiple access scheme reflecting LED's property is required. In this paper, a home networking system that can serve wide in-building area by integrating PLC and VLC, is proposed and implemented, then its performance is measured. A binary CDMA is used in the multiple access since this scheme is good for nonlinear device like LED, while infrared is used in the upstream transmission.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.4
• /
• pp.1-9
• /
• 2010

An LED driving and control circuit has been developed. The LED driver has a new PWM circuit for current control of LED columns with dimming, current and thermal control, and communication functions. The PWM circuit is composed of two ring oscillator and one counter which can be constructed using basic digital logic components. In addition, it has the functions of remote control mode such as ON, OFF, emergency and power saving modes by the serial communication. The PWM generator and control circuit have been designed and fabricated 0.35[${\mu}m$] Magnachip/Hynix digital IC fabrication process. The LED driving and control board using the developed chip is fabricated and tested successfully.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.6
• /
• pp.163-168
• /
• 2011

In this paper, we propose an emotion transfer system based on LED, which presents and transmitts users emotion through Bluetooth and ZigBee using LED light. We propose an emotional LED system interacting multiple LED lighting system and implement the proposed system using smartphone and WPAN network with Bluetooth and ZigBee. For the transmission of data, ZigBee is adopted for each LED lighting system and Bluetooth is utilized for the smartphone. Also, the LED lighting systems which are connected to smartphone have both ZigBee and Bluetooth module for the heterogeneous network. The implemented system shows the validity and applicability of the proposed system.

• Korean Journal of Environmental Agriculture
• /
• v.29 no.4
• /
• pp.374-380
• /
• 2010

This experiment was carried out to investigate the effect of light qualities and lighting types provided by LED Chamber System which designed by Rural Development Administration on growth and development of Chrysanthemum (Dendranthema grandiflorum L., cv. 'Cheonsu') plantlet cultured in vitro. The explants of single-node cuttings were exposed to monochromic or mixture radiation of blue, red, or green under continuous and intermittent lighting for 42 days. The intermittent lighting of 20 sec. on and off per minute significantly stimulated shoot elongation with lower number of internodes compared with continuous lighting treatments. However, continuous blue, red, or green light gave greater dry weight comparing the intermittent lighting, and the lowest weight was recorded at the continuous fluorescent lamp. Otherwise, the plantlet growth in dry weight or leaf area was inhibited by the green light controlled at 50 times intermittence but internode elongation was significantly increased. These results showed that the plantlets were successfully grown under the LED Chamber System controlled with different light qualities and lighting types. Quantitative growth of the plantlets was improved under the shorter photoperiod with a intermittent lighting cycle compared with continuous lighting using fluorescent lamps. It is concluded that the growth and development of in vitro plantlets such as single-node cuttings can be achieved by the controlling of light quality or lighting type during the photoperiod per day with a lower electric cost compared with conventional continuous lighting system.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.3
• /
• pp.495-502
• /
• 2020

In this paper, a power management circuit was designed to drive the emergency lighting LED in the underground facility for public utilities using magnetic energy harvest. The magnetic energy harvest consists of a harvest elements and power management circuits. The proposed circuit was made of a rectifier, a battery charging circuit, and an LED driving circuit. In normal times, the battery is charged with the harvested power, and in the event of an emergency, the energy stored in the battery is used to drive the LED. As a result of the measurement, it took two minutes to charge the 47 mF capacitor. This is the amount of power that can drive an LED for emergency lighting for about three and a half minutes. Through this, it was confirmed that the power management circuit for magnetic energy harvest proposed in this paper can be used as an emergency lighting LED-driven power device in an underground facility for public utilities where it is difficult to draw separate power.

• Korean Journal of Organic Agriculture
• /
• v.27 no.2
• /
• pp.161-171
• /
• 2019

A light-emitting diode (LED) is most efficient in terms of economic benefits. The aim of the present study was to evaluate the effects of LED lighting intensity on milk production, milk composition, and the immune response of Holstein cows. Thirty-eight lactating cows were assigned to four experimental groups: control group (exposed natural daylight without LED light) and three LED treatment group (50 lux; natural daylight and 6 h LED light of 50 lux intensity, 100 lux; natural daylight and 6 h LED light of 100 lux intensity, 200 lux; natural daylight and 6 h LED light of 200 lux intensity). There was a significant effect on the decrease ratio in milk production in 200 lux group. Lactose was significantly increased in 100 lux than the other LED treated groups. In addition to the hemolytic biochemical analysis, AST and β-HB were significantly increased in the 50 lux than the other groups. Prolactin and IGF-1 levels were significantly increased in 200 lux compared to other groups. Besides, cortisol was significantly higher in 50 lux and lowered in the 200 lux than the control, while IgA and IgG were not significant among the groups. Therefore, it was concluded that LED lighting intensity had some impact on blood parameters and immune responses in dairy cows with increased milk production.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.1
• /
• pp.115-122
• /
• 2012

In this paper, we demonstrate that indoor wireless optical communication is possible with lighting LEDs without a photo diode or a solar cell. A LED is used for both light emitting and light signal detection. This scheme is very useful because transmission is possible without any additional communication systems. In experiments, wireless optical communication will be carried out at a higher signal frequency of 5MHz using a lighting LEDs with both light emitting and light detection characteristics in the future.

• Journal of Internet Computing and Services
• /
• v.17 no.1
• /
• pp.35-45
• /
• 2016

Melatonin hormone involved in human's circadian rhythm adjustment sensitively responds to light's specific short wavelength ratio. A shift worker's circadian rhythm disturbance and sleep disorder are caused by the existing lighting conditions, whose short wavelength ratio is fixed. The life pattern of a shift worker changes irregularly because of irregular working hours and the same lighting environment; thus, his/her concentration is reduced. For such a reason, negative effects ensue to the detriment of healthy everyday life, including a high risk of accidents or having unsound sleep after leaving work. A smartphone-based wavelength control LED lighting system that targets shift workers and that can easily measure and control lighting suitable for wake-sleep cycle, according to working hours and closing hours, is proposed in this paper. First, after the light characteristics of LED lighting that changes depending on light control ratio are measured through the color sensor installed on the smartphone and the externally-linked Mini-Spectrometer, they are stored in the database. Based on the stored optical characteristics data, the measurement module and light control module are implemented. Lighting is offered using a control ratio having the maximum rate of short wavelength in consideration of the target illuminance, classified according to work type by identifying working hours as time when waking is required for shift workers. After a shift work leaves work, the amount of lighting is varied, using a control ratio having a minimum short wavelength rate so that a shift worker can enter the sleep state naturally.

• Journal of Biosystems Engineering
• /
• v.37 no.5
• /
• pp.314-318
• /
• 2012

Purpose: This study was conducted to develop a measurement system for determining photosynthetic photon flux (PPF) distribution and illumination efficiency of LED lamps. Methods: The system was composed of a linear moving sensor part (LMSP), a rotating part to turn the LMSP, a body assembly to support the rotating part, and a motor controller. The average PPF of the LED lamp with natural cooling and water cooling was evaluated using the measurement system. Results: The PPF of LED lamp with water cooling was 3.1-31.7% greater than that with natural cooling. Based on the measured value, PPF on the horizontal surface was predicted. Illumination efficiency of the LED lamp was slightly increased with water cooling by 3.4%, compared with natural cooling. A simulation program using MATLAB was developed to analyze the effects of the vertical distance from lighting sources to growing bed, lamp spacing, and number of LED lamps, on the PPF distribution on the horizontal surface. The uniformity of the PPF distribution of the LED lamps was fairly improved with 15 cm spacing, as compared to the 5 cm spacing. By simulation, PPF of $217.0{\pm}27.9{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ was obtained at the vertical distance of 40 cm from six LED lamps with 12 cm spacing. This simulated PPF was compared to the measured one of $225.9{\pm}25.6{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. After continuous lighting of 346 days, the relative PPF of LED lamps with water cooling and natural cooling was decreased by 6.6% and 22.8%, respectively. Conclusions: From these results, it was concluded that the measurement system developed in this study was useful for determining PPF and illumination efficiency of artificial lighting sources including LED lamp.

• Journal of Korea Game Society
• /
• v.17 no.3
• /
• pp.45-52
• /
• 2017

This paper proposes a new strategy of emotion-based music visualization. Emotional LED lighting control system is suggested to help audiences enhance the musical experience. In the system, emotion in music is recognized by a proposed algorithm using a dimensional approach. The algorithm used a method of music emotion variation detection to overcome some weaknesses of Thayer's model in detecting emotion in a one-second music segment. In addition, IRI color model is combined with Thayer's model to determine LED light colors corresponding to 36 different music emotions. They are represented on LED lighting control system through colors and animations. The accuracy of music emotion visualization achieved to over 60%.