Kim, W.K.;Kim, M.H.;Seo, D.S.;Lee, C.Y.;Suk, Y.O.;Ko, Y.
Asian-Australasian Journal of Animal Sciences
/
v.18
no.4
/
pp.532-537
/
2005
Increasing of body weight has been one of the important economic factors in the poultry industry. Insulin-like growth factor (IGF)-I is a polypeptide that serves to regulate muscle development and body growth. Moreover, IGF-I is related to feed efficiency. However, there are few studies regarding the regulatory roles of chicken IGF-I/-II compared with that of mammals. Especially, the Korean Native Ogol Chicken (KNOC) has a lean body growth and its body weight is generally lighter than the broiler chicken. Therefore, this study was conducted to investigate associations among serum IGF-I/-II concentration, feed efficiency, and body growth in KNOC. The body weight and feed intake of KNOC were recorded from 20 to 36 weeks at 2 weeks intervals, and blood was taken every 2 weeks. Serum IGF-I/-II were measured by RIA. Chickens were divided into two groups, high and low serum IGF-I concentration. Generally, feed efficiency and growth performance (body weight and weight gain) in the high serum IGF-I group were higher than those of the low group during the experimental period. In particular, the body weight of the IGF-I high group were significantly different from those of the IGF-I low group at 34 and 36 weeks, respectively (p<0.05). Moreover, body weight, weight gain, and feed efficiency had a significant correlation with serum IGF-I at several weeks (p<0.05 and p<0.01). These results show that IGF-I plays an important role in body growth and suggests a possibility that serum IGF-I could be used as a selection marker for body growth in KNOC.
Korean Journal of Construction Engineering and Management
/
v.8
no.3
/
pp.57-65
/
2007
Last Planner System (LPS) developed by Lean Construction Institute consists of four steps: Master Schedule, Phase Schedule, Lookahead Planning and Weekly Work Plan. This paper focuses on the process of measuring Percent of Plan Completed (PPC) at the weekly Work Plan stage. PPC means the percentage of weekly assignments completed. According to the results of the researches that deal with PPC from many other countries, we can assure the benefits or using PPC. However the concept of PPC is unfamiliar in Korea construction industry. This paper analyzes the cases in which PPC is applied in other countries and compares them with the production control system in Korean construction industry. The results of this research will provide the time management system for using PPC in Korea.
Transactions of the Korean Society of Automotive Engineers
/
v.8
no.2
/
pp.19-26
/
2000
This paper presents the effects of initial pressure of mixture on CO, $CO_2$ and NOx emissions in constant volume combustion chamber. The CO, $CO_2,O_2,N_2$ concentrations in the chamber are determined by thermal conductivity detection (Gas-chromatograph) wile the NOx concentration is measured by chemiluminescent detection (NOx Analyser). Methane-air mixture is used as premixed fuel and the measurements are taken with equivalence ratios($\phi$) varing from 0.6 to 1.3, and initial pressures of methane-air mixture varing from 0.1MPa to 0.8MPa in constant volume combustion chamber. The NOx concentration steadily increases with increasing equivalence ratio, peaks in lean flame ($\phi$=0.85~0.9), and then rapidly decreases. However, as the initial pressure of mixture is increased, the equivalence ratio corresponding to the point of peak [NOx] shifts towards leaner conditions. This is caused by a similar shift in the peak [CH], which is caused by the variation with pressure and equivalence ratio of the rate of CH production from $CH_2$ and OH. The maximum combustion pressure peaks at $\phi$ =1.05 and the $CO_2$ concentration peaks at $\phi$=0.95~1.0 while the CO concentration rises sharply at the condition of fuel-rich mixtures. This is caused by complete combustion at $\phi$=0.95.
Objective: Meat quality attributes in postmortem muscle tissues depend on skeletal muscle metabolites. The objective of this study was to determine the key metabolic compounds and pathways that are associated with postmortem aging and beef quality in Japanese Black cattle (JB; a Japanese Wagyu breed with highly marbled beef). Methods: Lean portions of Longissimus thoracis (LT: loin) muscle in 3 JB steers were collected at 0, 1, and 14 days after slaughter. The metabolomic profiles of the samples were analyzed by capillary electrophoresis time-of-flight mass spectrometry, followed by statistical and multivariate analyses with bioinformatics resources. Results: Among the total 171 annotated compounds, the contents of gluconic acid, gluconolactone, spermidine, and the nutritionally vital substances (choline, thiamine, and nicotinamide) were elevated through the course of postmortem aging. The contents of glycolytic compounds increased along with the generation of lactic acid as the beef aging progressed. Moreover, the contents of several dipeptides and 16 amino acids, including glutamate and aromatic and branched-chain amino acids, were elevated over time, suggesting postmortem protein degradation in the muscle. Adenosine triphosphate degradation also progressed, resulting in the generation of inosine, xanthine, and hypoxanthine via the temporal increase in inosine 5'-monophosphate. Cysteine-glutathione disulfide, thiamine, and choline increased over time during the postmortem muscle aging. In the Kyoto encyclopedia of genes and genomes database, a bioinformatics resource, the postmortem metabolomic changes in LT muscle were characterized as pathways mainly related to protein digestion, glycolysis, citric acid cycle, pyruvate metabolism, pentose phosphate metabolism, nicotinamide metabolism, glycerophospholipid metabolism, purine metabolism, and glutathione metabolism. Conclusion: The compounds accumulating in aged beef were shown to be nutritionally vital substances and flavor components, as well as potential useful biomarkers of aging. The present metabolomic data during postmortem aging contribute to further understanding of the beef quality of JB and other breeds.
Objective: Investigation of muscle growth at different developmental stages is an appropriate strategy for studying the mechanisms underlying muscle development and differences in phenotypes. In particular, the muscle development mechanisms and the difference between the fastest and slowest growth rates. Methods: In this study, we used a growth curve model to fit the growth inflection point (IP) of QingYu pigs and compared differences in the long non-coding RNA (lncRNA) transcriptome of muscle both at the growth IP and plateau phase (PP). Results: The growth curve of the QingYu pig had a good fit (R2 = 0.974) relative to a typical S-curve and reached the IP at day 177.96. At the PP, marbling, intramuscular fat, and monounsaturated fatty acids had increased significantly and the percentage of lean muscle and polyunsaturated fatty acids had decreased. A total of 1,199 mRNAs and 62 lncRNAs were differentially expressed at the IP compared with the PP. Additional to gene ontology and Kyoto encyclopedia of genes and genomes pathway analyses, these differentially expressed protein coding genes were principally related to muscle growth and lipid metabolism. Conclusion: Our results suggest that the identified differentially expressed lncRNAs, could play roles in muscle growth, fat deposition and regulation of fatty acid composition at the IP and PP.
Objective: Japanese Brown (JBR) cattle, especially the Kochi (Tosa) pedigree (JBRT), is a local breed of moderately marbled beef. Despite the increasing demand, the interbreed differences in muscle metabolites from the highly marbled Japanese Black (JBL) beef remain poorly understood. We aimed to determine flavor-related metabolites and postmortem metabolisms characteristic to JBRT beef in comparison with JBL beef. Methods: Lean portions of the longissimus thoracis (loin) muscle from four JBRT cattle were collected at 0, 1, and 14 d postmortem. The muscle metabolomic profiles were analyzed using capillary electrophoresis time-of-flight mass spectrometry. The difference in post-mortem metabolisms and aged muscle metabolites were analyzed by statistical and bioinformatic analyses between JBRT (n = 12) and JBL cattle (n = 6). Results: A total of 240 metabolite annotations were obtained from the detected signals of the JBRT muscle samples. Principal component analysis separated the beef samples into three different aging point groups. According to metabolite set enrichment analysis, post-mortem metabolic changes were associated with the metabolism of pyrimidine, nicotinate and nicotinamide, purine, pyruvate, thiamine, amino sugar, and fatty acid; citric acid cycle; and pentose phosphate pathway as well as various amino acids and mitochondrial fatty acid metabolism. The aged JBRT beef showed higher ultimate pH and lower lactate content than aged JBL beef, suggesting the lower glycolytic activity in postmortem JBRT muscle. JBRT beef was distinguished from JBL beef by significantly different compounds, including choline, amino acids, uridine monophosphate, inosine 5'-monophosphate, fructose 1,6-diphosphate, and betaine, suggesting interbreed differences in the accumulation of nucleotide monophosphate, glutathione metabolism, and phospholipid metabolism. Conclusion: Glycolysis, purine metabolism, fatty acid catabolism, and protein degradation were the most common pathways in beef during postmortem aging. The differentially expressed metabolites and the relevant metabolisms in JBRT beef may contribute to the development of a characteristic flavor.
Consumers have become very conscious about their nutrition and well being due to changes in their socio-economic lifestyle and rapid urbanization. Therefore, development of technology for production of low cost and functional meat products is urgently required. One such approach is innovative restructuring technology in which binding of meat pieces still remains the main challenge and extension of product is generally associated with poor binding and texture. Thus, the present study was envisaged as an attempt to solve this problem by the incorporation of flaxseed flour (FF) as bind enhancing agent. The FF was used at three different levels viz., 0.5%, 1%, and 1.5% to replace lean meat in pre-standardized restructured mutton chops formulation. The products were subjected to analysis for physico-chemical, sensory and textural properties. Cooking yield, moisture percentage and fat percentage increased with increase in the level of incorporation of FF, however, protein percent and pH decreased with increase in the level of incorporation. Shear force value of product incorporated with 1.5% FF was significantly higher (p<0.01) than control and product containing 0.5% FF level. Among the sensory attributes, product with 1% flaxseed flour showed significantly higher values (p<0.05) for general appearance, binding, texture and overall acceptability. Hardness showed significant increasing (p<0.01) values with increasing levels of incorporation of flaxseed flour, however all other parameters of texture profile analysis showed a decreasing trend. On the basis of sensory scores and physico-chemical properties, the optimum incorporation level of FF was adjudged as 1%. Products incorporated with optimum level of flaxseed flour (1%) were also assessed for water activity and microbiological quality during the storage period of 15 days. It was found that the extended restructured product could be safely stored under refrigeration ($4^{\circ}C{\pm}1^{\circ}C$) in low density polyethylene (LDPE) pouches for 15 days without marked deterioration in sensory and microbiological quality. Thus, it was concluded that flaxseed flour can be used as a good bind enhancing agent in extended restructured meat products at an economic cost.
Alexandre, G.;Limea, L.;Fanchonne, A.;Coppry, O.;Mandonnet, N.;Boval, M.
Asian-Australasian Journal of Animal Sciences
/
v.22
no.8
/
pp.1140-1150
/
2009
Forage diets provide good quality carcasses in sheep but very little is known in tropical goats. An experiment was designed with Creole male goats using grass-based systems to assess carcass yield, scores, cuts and composition. After weaning (84 d, 9.2 kg LW) two modes of forage feeding were compared with two replicates of each. Feeding groups were: PF for animals reared at pasture (n = 62) and IF when reared indoors (n = 60). Given that forage finishing will result in low ADG it appeared necessary to study different fattening lengths. The kids were equally divided into 4 groups: group A (n = 32), 4mo after weaning; group B (n = 32), 4mo after A; group C (n = 30), 3mo after B and group D (n = 28), 2mo after C. The animals grazed (in two sub-flocks) on irrigated tropical pastures managed in a rotational system (28 d of re-growth) at a mean stocking rate of 1,200 kg/ha/yr LW. The IF groups were reared in collective pens on a slatted floor (2 replicates of 7 or 8 kids each). They were fed the same stand of tropical grass (25% DM, 12% CP) as that of pasture that was cut daily and provided ad libitum. The ADG (-10%), the weights of omental fat (-60%) and fat in shoulder (-18%), the ultimate pH of carcass (-12%), the meat colour score (-24%), the ""parameter accounting for redness (12%) and the DM and lipid contents (-4%) were significantly lower (p<0.05) in PF than in IF, while the liver was heavier (+23%, p<0.05). Feeding conditions seemed to be similar, thus, differences could be related to gastrointestinal parasitism in the PF system and hypotheses are discussed. Increasing the fattening duration, resulted in significant difference (p<0.01) in many traits: the weights at slaughter and of carcass increased by 40% and 60% from groups A to D and consequently the weights of body compartments and carcass cuts (1.5 to 2.0 fold more). When the results were presented as percentage of empty body weight and carcass weight, these preliminary results (carcass weight 9kg and yield 53%, muscle proportion 70%) and qualitative parameters (low fat score 2/5, fat proportion 5%), seem to be a good incentive for the sector to develop a niche market to meet consumer lean meat expectations. The indoors system could be implemented where there was low availability of grazing areas or problems of dog attacks.
Objective: The QingYu pig is well known for its excellent meat quality attributes in Sichuan province, China. In order to improve its production efficiency, the determination of genetic factors contributing to quantifiable economic traits of livestock is important. Moreover, the cross-breeding of QingYu pigs with western breeds possessing strong growth attributes is an efficient way to improve the performance of this breed. Methods: Here, the genetic parameters of several important reproductive traits of QingYu pigs were estimated, include total number born (TNB), number born alive, litter birth weight, individual birth weight, number of piglets weaned, litter weaning weight, and individual weaning weight. The data was analyzed using the ASReml 3.0 software (NSW Inc., Sydney, Australia). Furthermore, the effects of crossing Berkshire with QingYu (BQ) pigs on carcass and meat quality traits, as well as the effects of slaughter weight on carcass and meat quality of BQ were characterized. Results: QingYu pigs exhibited superior reproductive traits. The TNB available to QingYu pigs was more than 8 per parity. The observed repeatability of the reproductive traits of the QingYu pigs was between 0.10 and 0.23. The significantly correlated genetic and phenotypic of reproduction traits were consistent. Interestingly, the BQ pigs exhibited improved carcass quality, with a significant increase in loin muscle area, lean percentage and reduction in sebum percentage. As a result, BQ had higher L45min, lower cooking scores, and lower drip loss. In addition, the loin muscle area, body length, and sebum percentage were significantly higher in 90 and 100 kg animals. Cooking loss showed a significant increase at 80 kg, and marbling increased significantly from 90 kg. Conclusion: The results of this study suggest that QingYu pigs exhibit excellent reproductive properties and heritability of these traits. Crossing with Berkshire is an efficient strategy to improve the carcass and meat quality of QingYu pigs for commercial operations. Furthermore, it appears as though the optimal slaughter weight of BQ pigs is at approximately 90 kg.
Nsiyapnze Katte Yato Katte;Tchoffo Herve;Azafack Kana Dorice;Chongsi Margaret Mary Momo;Ngoula Ferdinand
Journal of Animal Reproduction and Biotechnology
/
v.38
no.4
/
pp.236-246
/
2023
Background: This study helps to evaluate the Ovarian potential of Cameroonian Zebu cattle (Bos indicus) slaughtered in Etoudi - Yaoundé for implementing Assisted Reproductive Techniques (ARTs). The aim was to enhance the productivity of the cattle sub-sector in Cameroon while conserving local genetic resources. Methods: A total of 144 cows, including 94 cycled cows and 50 pregnant cows, were included in the study. Live weights were determined by measuring the thoracic perimeter of each cow using a Rondo measuring tape. Age was determined postmortem through examination of dentition and horns, while the uterus and ovaries were removed, weighed, and classified based on physiological status (pregnant or nonpregnant). Follicles were counted, and their diameters were measured and categorized into small (Ø < 3 mm), medium (Ø 3-8 mm), and large (Ø > 8 mm). Results: The results revealed an average follicular population of 32.02 ± 9.31 per cow, with 22.43 ± 8.45 small follicles, 8.42 ± 3.87 medium follicles, and 0.76 ± 0.34 large follicles. The weight of the right ovary was significantly higher than that of the left ovary (p < 0.05), and cows aged 6 to 9 years exhibited a higher number of follicles compared to other age groups. Cows with medium (BCS = 3) and large (BCS = 4-5) body reserves had the heaviest ovaries. Additionally, pregnant cows had heavier uteri compared to non-pregnant cows, and cows with a body condition score of 3 or higher had higher uterine weights than lean cows (BCS = 1-2). Conclusions: This study demonstrates that age, body condition score, and pregnancy status influence ovarian weight. Body Condition Score serves as a reliable indicator of cow nutritional status, and cows with BCS of 3-5 are excellent candidates for in vitro production of embryos.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.