• 한국자동차공학회논문집
• /
• 제5권2호
• /
• pp.183-196
• /
• 1997

Gas flow field within the cylinder which is called a tumble flow is important factor in improving lean combustion stability. In this study, steady state flow tests were performed to quantify tumble ratio of flowfields generated by a tumble intensifying valve(TIV). In addition, velocity and fluctuation profiles in an intake port and flowfields in th cylinder were inspected using a hotwire anemometer and a laser light sheet method with various TIV configurations. These experimental results show that installated TIV has a great effect on flow field distribution in an intake port and test effects enhance a tumble flow in the cylinder.

• 한국자동차공학회논문집
• /
• 제9권4호
• /
• pp.85-91
• /
• 2001

LPG has been well known as a clean alternative fuel for vehicles. As a fundamental study on liquid phase LPG injection (hereafter LPLI) system application to heavy-duty engine, engine output and combustion performance were investigated with various operating conditions using a single cylinder engine equipped with the LPLI system. Experimental results revealed that no problems were occurred in application of the LPG fuel to heavy-duty engine, and that volumetric efficiency and engine output, by 10% approximately, were increased with the LPLI system. It was resulted from the decrease of the intake manifold temperature through liquid phase LPG fuel injection. These results provided an advantage in the decrease of the exhaust gas temperature, in the control of knocking phenomena, spark timing and compression ratio. The LPLI engine could normally operated under $\lambda$=1.5 or EGR 30% condition. The optimized swirl ratio for the heavy duty LPG engine was found around R_s$ = 2.0.

• 대한기계학회논문집
• /
• 제12권6호
• /
• pp.1358-1371
• /
• 1988

The combustion process is the most important process in the S.I. engine since it determines performance and emissions. As the flame propagates slowly due to EGR or lean mixture, the fast burn system is widely used in the modern engines in order to improve engine performance. As the basic research for the fast burn system of the S.I engine, this study is aimed to identify the effects of the intake port design on the air motion inside a cylinder. In this study various intake ports were designed and tested. Swirl levels for the different intake ports were measured by a swirl meter and LDv.Also transient air motion inside a cylinder is further investigated following the motion of the boston. Out of the various intake ports tested in this study the masked shroud head (MSH) generates the highest swirl while keeping satisfactory volumetric efficiency. The MSH port also produces high level of turbulence by shearing action between cylinder wall and swirl.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2015년도 제51회 KOSCO SYMPOSIUM 초록집
• /
• pp.123-125
• /
• 2015

A study has been conducted to investigate the effect of swirl angle in low swirl combustor. In this study, the employed swirl angles were $28^{\circ}$, $32^{\circ}$ and $37^{\circ}$. Direct flame photos show that the width of the flame is expanded and the length of the flame is shortened when swirl angle is increased. Also, as the swirl angle was increased, the flame stability region could be widened due to the expansion of lower flammable limit. Between 3 and 7kW, CO emissions was below 10 ppm and NOx emissions was also below 27 ppm at $O_2$ 15% basis over the lean burning range of 0.6 < ${\Phi}$ < 0.9. From this investigation of stability expansion effect and emission performance, it was identified that the swirl angle $37^{\circ}$ is most suitable swirling condition in the low swirl model combustor.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2015년도 제51회 KOSCO SYMPOSIUM 초록집
• /
• pp.53-56
• /
• 2015

A combined experimental and numerical study has been conducted to investigate the downstream interaction between simulated SNG-air premixed flames in fuel composition of 91% $CH_4$ + 6% $C_3H_8$ + 3% $H_2$. In this study, the effects of fuel molar concentration(lean-rich) and strain rate($a_g$) were major parameters. A main focus is to investigate flames behavior and chemical interaction at flames downstream. The numerical results were calculated by OPPDIF application. The reaction mechanism adopted was USC-II model including C3 reaction.

• 대한기계학회논문집B
• /
• 제20권1호
• /
• pp.359-368
• /
• 1996

For fuel economy and pollutant reduction, the interests in lean burn has increased recently. The purpose of this research is to develop a High Frequency Ignition System (HIS) that can make powerful ignition. We studied relations between performance of HIS and probability of inflammation under various ignition conditions. It is concluded that the portion of capacitance energy to the total energy is comparatively larger and that the optimum spark interval and spark duration are dependent upon conditions of Constant Volume Combustion Chamber.

• 한국분무공학회지
• /
• 제28권1호
• /
• pp.24-31
• /
• 2023

In this study, characteristics of a propane-air premixed flame sin DC electric field was investigated. The stainless steel Bunsen burner and the stainless steel ring were used as electrode, and the high voltage supply was used for applying electric field. Flammability range increased significantly when the positive voltage was applied because of extension of LBO limit, while it shrank when the negative voltage was applied. The reason for this was not much related to the burning velocity, but the induced flow around the burner by electric field. withNOx production slightly increased after positive voltage was applied in identical equivalence ratio. Nevertheless, it was advantageous to apply the positive electric field to reduce the NOx since the extension of LBO limit makes the burner possible to operate in very low equivalence ratio.

• 대한기계학회논문집B
• /
• 제36권4호
• /
• pp.405-412
• /
• 2012

MCFC 발전시스템에서 연소기는 연료극의 배가스 중에 포함된 미반응 가스를 연료로 사용하여 공기극에 $H_2O$와 $CO_2$ 농도가 높은 고온의 혼합가스를 공급하는 역할을 한다. 하지만 이러한 배가스는 가연한계 이하로 내려가게 되어 통상적인 연소방식에 의한 완전연소가 어렵기 때문에 이를 해결하기 위하여 촉매연소기를 사용한다. 완전연소 및 이에 다른 공해물질의 저감 특성에 따라 최근 촉매연소는 환경친화적인 연소방식으로 주목받고 있다. 따라서 본 연구에서는 MCFC 발전시스템의 BOP 시스템에 적용되는 촉매연소기에 대한 실험연구를 수행하였다. 본문에서는 실험장치를 설명한 후 촉매연소 시스템의 설계변수, 즉, $H_2$ 연료 첨가에 따른 연료조성, 유입가스의 온도, 과잉 공기비, 촉매의 종류, 그리고 시동 스케줄에 따른 촉매연소 특성을 고찰하였다.

• 한국가스학회지
• /
• 제17권1호
• /
• pp.1-6
• /
• 2013

$NO_x$ 배출허용기준이 강화되는 배출가스 규제에 대응하기 위한 대안으로서 제시되는 천연가스-수소 혼합연료 (HCNG)는 수소의 빠른 화염속도와 넓은 가연범위를 이용하여 후처리 장치 없이 규제치를 만족할 수 있어 디젤엔진에 비해 저공해성이나 가격경쟁력 측면에서 유리한 장점이 있다. 열효율 측면에서도 우수성을 인정받는 HCNG 연료는 수소 혼합율은 물론 운전영역별 운전전략에 따라 연소특성이 달라진다. 본 연구에서는 대형 천연가스 엔진에 수소혼합율 30%의 HCNG 연료를 적용하여 운전영역별 안정적인 연소특성 및 배출가스 특성을 살펴봄으로써 상용화 가능성과 운전전략을 포함한 기술 개발방향에 대해 검토하고자 하였다.

• 대한기계학회논문집B
• /
• 제34권7호
• /
• pp.689-696
• /
• 2010

디젤엔진은 높은 열효율과 우수한 연비 성능 등의 장점을 가지고 있으나, 기화된 연료와 주변 공기가 혼합된 후 착화되는 과정을 거치기 때문에 이론 공연비 영역에서는 질소산화물(NOx) 배출이 증가되는 문제점을 가지고 있다. 최근 활발히 연구되고 있는 높은 정화 효율을 가진 LNT 촉매는 희박 분위기 조건에서는 NOx를 흡장하게 되고 과농한 분위기에서는 환원 분위기 형성을 통하여 NOx를 저감시키게 된다. 희박 공연비에서 동작하는 디젤 엔진에서는 이러한 환원 과정을 이루기 위해 주기적으로 과농한 분위기를 형성해주어야만 하는데, 이러한 연구는 NOx 저감을 위해 HC를 포함한 환원제의 농도를 제어하는 기술로서 본 연구에서는 디젤을 연료로 하는 수소농후가스 발생장치를 이용하여 LNT 촉매에 환원제로서 수소농후가스를 직접 공급하는 방식으로 LNT 촉매의 NOx 저감 특성을 파악하였다.