• Atmosphere
• /
• v.27 no.1
• /
• pp.55-65
• /
• 2017

This study investigates how Eurasian snow cover in spring (March and April) is associated with Korean temperature during summer (June-July-August). Two leading modes of Eurasian snow cover variability in spring for 1979~2015 are obtained by Empirical Orthogonal Function (EOF) analysis. The first EOF mode of Eurasian snow cover is characterized by a zonally elongated pattern over the whole Eurasian region and its principal component is more correlated with Korean temperature during June. On the other hand, the second EOF mode of Eurasian snow cover is characterized by an east-west dipole-like pattern, showing positive anomalies over eastern Eurasian region and negative anomalies over western Eurasian region. This dipole-like pattern is related with Korean temperature during August. The first leading mode of Eurasian snow cover is associated with anomalous high (low) pressure over Korea (Sea of Okhotsk) during June, which might be induced by much evaporation of soil moisture in Eurasia during March. On the other hand, the second mode of Eurasian snow cover is associated with a wave train resembling with Eurasian (EU)-like pattern in relation to the Atlantic sea surface temperature forcing, leading to the anomalous high pressure over Korea during August. Understanding these two leading modes of snow cover in Eurasian continent in spring may contribute to predict Korean summer temperature.

• Transactions on Electrical and Electronic Materials
• /
• v.2 no.3
• /
• pp.12-17
• /
• 2001

It is shown in the present study that during the HTS (hot temperature storage) test, the metal contamination by impure elements can be highly susceptible to the void formation, leading to the open failure of the power line in the memory device. Such a functional failure associated with the metal contamination was investigated to be dominant in the early stages of the HTS test while the formation of a stress-driven void is mainly observed in the later stages. In particular, it was found that the void formed in the contaminated metal takes on a slit-like shape which has been known to be characteristic of the stress-related voiding. The impure elements leading to the metal degradation were identified to be carbon and oxygen introduced during the metal sputtering process. The experimental works show that the device reliability was significantly improved by reducing the level of such impure elements within metal. It is shown in the present study that during the HTS (hot temperature storage) test, the metal contamination by impure elements can be highly susceptible to the void formation, leading to the open failure of the power line in the memory device. Such a functional failure associated with the metal contamination was investigated to be dominant in the early stages of the HTS test while the formation of a stress-driven void is mainly observed in the later stages. In particular, it was found that the void formed in the contaminated metal takes on a slit-like shape which has been known to be characteristic of the stress-related voiding. The impure elements leading to the metal degradation were identified to be carbon and oxygen introduced during the metal sputtering process. The experimental works show that the device reliability was significantly improved by reducing the level of such impure elements within metal.

• Molecules and Cells
• /
• v.37 no.4
• /
• pp.307-313
• /
• 2014

Cell migration requires a defined cell polarity which is formed by diverse cytoskeletal components differentially localized to the poles of cells to extracellular signals. Rap-GAP3 transiently and rapidly translocates to the cell cortex in response to chemoattractant stimulation and localizes to the leading edge of migrating cells. Here, we examined localization of truncated RapGAP3 proteins and found that the I/LWEQ domain in the central region of RapGAP3 was sufficient for posterior localization in migrating cells, as opposed to leading-edge localization of full-length Rap-GAP3. All truncated proteins accumulated at the leading edge of migrating cells exhibited clear translocation to the cell cortex in response to stimulation, whereas proteins localized to the posterior in migrating cells displayed no translocation to the cortex. The I/LWEQ domain appears to passively accumulate at the posterior region in migrating cells due to exclusion from the extended front region in response to chemoattractant stimulation rather than actively being localized to the back of cells. Our results suggest that posterior localization of the I/LWEQ domain of RapGAP3 is likely related to F-actin, which has probably different properties compared to newly formed F-actin at the leading edge of migrating cells, at the lateral and posterior regions of the cell.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.3
• /
• pp.419-430
• /
• 1999

Measurements of local blowing ratio and ammonia-diazo flow visualizations have been conducted for a shower-head film cooling on a first-stage turbine stator. In this study, six rows of normal holes are drilled symmetrically on the semicircular leading edge of a simulated blunt body. The measurements show that for an average blowing ratio based on freestream velocity, M, of 0.5, local average mass flow rate through the first two rows of the holes is less than those through the second and third two rows of the holes, and the fraction of mass flow rate through the first two rows to total mass flow rate has a tendency to increase with the increment of M. The flow visualizations reveal that the injection through the first two row results in inferior film coverage even In the case of M = 0.5, meanwhile the row of holes situated at farther downstream location provides higher film-cooling performances for all tested M. This is because film-cooling effectiveness depends on local mainflow velocity at the hole location as well as the mass flow rate through each row.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.2
• /
• pp.177-187
• /
• 2000

Measurements of temperature fields and film-cooling effectiveness have been conducted for a shower-head film cooling on the leading edge of a blunt body, which simulates a first-stage turbine stator. In this study, three injection cases are employed for an average blowing ratio based on freestream velocity, M, of 0.5, 1.0 and 1.5. Two (Case 1), four (Case 2) and six (Case 3) rows of normal holes are symmetrically drilled on the three tested circular-cylinder leading edges. The measurements show that regardless of M, the film-cooling effectiveness increases as the injection row is situated at farther downstream location. In Case 1, the film-cooling effectiveness is highest for M = 0.5 and lowest for M = 1.5. On the contrary, in Case 3, the film-cooling effectiveness is highest for M = 1.0 and lowest for M = 0.5. When M = 0.5, the film coverage by the first row of the injection holes deteriorates as the number of the injection row increases. In particular, the film-cooling effectiveness due to the injection through the first row of the holes in Case 3, has a nearly zero value.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.6
• /
• pp.672-681
• /
• 2004

Direct numerical simulation was carried out to study the vortical structures of the flow around a wall-mounted cube in a channel at Re=1,000 and Re=3,500 based on cubic height and bulk mean velocity. The cubic obstacle is situated in the entrance region of the channel flow where the boundary layers are developing. Upstream of the obstacle, steady and unsteady laminar horseshoe vortex systems are observed at Re=1,000 and Re=3,500, respectively; the near-wake flow is turbulent in both cases. The flow separates at each leading sharp edge of the cube, and subsequent vortex roll-up is noticed in the corresponding free-shear layer. The vortex shedding from the upper leading edge (upper vortices) and that from the two lateral leading edges (lateral vortices) are both quasi-periodic and their frequencies are computed. The upper and lateral vortices further develop into hairpin and Λ vortices, respectively. A series of instantaneous contours of the second invariant of velocity gradient tensor helps us identify spatial and temporal behaviors of the vortices in detail. The results indicate that the length and time scales of the vortical structures at Re=3,500 are much shorter than those at Re:1,000. Correlations between the upper and lateral vortices are also reported.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.4
• /
• pp.1134-1147
• /
• 1995

POD (proper orthogonal decomposition) is applied to turbulent leading-edge separation bubble to extract coherent structures. A two-dimensional leading-edge separation bubble is simulated by discrete-vortex method, where a time-dependent source forcing is incorporated. Based on the wealth of numerical data, POD is applied in a range of the forcing amplitude ( $A_{o}$ = 0, 0.5, 1.0 and 1.5) and forcing frequency (0 .leq. $f_{F}$H/ $U_{\infty}$.leq. 0.3). It is demonstrated that the structures of POD have noticeable changes with local forcings. In an effort to investigate the mechanism of decreasing reattachment length, dynamic behaviors of the expansion coefficients and contributions of the eigenfunctions of POD are scrutinized. As the forcing amplitude increases, the large-scale vortex structures are formed near the forcing amplitude increases, the large-scale vortex structures are formed near the separation point and the flow structures become more organized and more regular, accompanying with the reduction of reattachment length. By further inverstigation of POD global entropy, it is seen that the reattachment length is closely linked to the degree of organization of the flow structures.es.s.

• Korean Management Science Review
• /
• v.33 no.3
• /
• pp.31-51
• /
• 2016

The objective of the study is to propose the catch-up strategy of Hyundai Kia to become the globally leading company in the automobile industry. For this, we try to compare Hyundai Kia with three leading automobile companies: Toyota, VW, and GM by using the Generalized Double Diamond Model. As a result, we present three ways that Hyundai Kia can become a "First Mover." The three strategies are : 1) controlling increase of wage, raising productivity, and increasing R&D investment 2) increasing overseas investment of the small and medium sized automobile factories 3) pursuing the two tracks strategy of a public car and a prestige car more aggressively. This study is significant in the fact that it presents the catch-up strategy of Hyundai Kia in the automobile industry, of which the leaders can not be changed easily, by the Generalized Double Diamond Model approach.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.12
• /
• pp.1223-1229
• /
• 2007

Flow traveling over a cavity opening forms a vortex due to unstable shear layer and induces an aerodynamic pressure excitation from the diffusion of the vortex convecting out of the trailing edge of the opening. The interaction between the excitation force and the cavity response sustains resonance in the resonator(cavity) and locked-in vortex shedding at the leading edge of the opening. The aerodynamic excitation force can be described from the diffusion of the vortex over the trailing edge and the level of its diffusivity is related to the strength of vorticity seeded at the leading edge. In this study, the control scheme of the internal pressure oscillation was proposed from regulating the vorticity at the leading edge by use of an oscillating spoiler. It was found that the relative motion between the spoiler and the air mass at the cavity opening influenced vorticity strength and the control was achieved by direct feedback of the cavity pressure fluctuation to the actuator.

• Wind and Structures
• /
• v.31 no.3
• /
• pp.185-196
• /
• 2020

A method to reduce the wind pressure at the leading edge of a noise barrier was investigated by gradually lowering the height of a member added to the end of the noise barrier. The shape of the lowered height of the added member was defined by its length and slope, and the optimal variable was determined in wind tunnel testing via the boundary-layer wind profile. The goal of the optimal shape was to reduce the wind pressure at the leading edge of the noise barrier to the level suggested in the Eurocode and to maintain the base-bending moment of the added member at the same level as the noise-barrier section. Using parametric wind tunnel investigation, an added member with a slope of 1:2 that protruded 1.2 times the height of the noise barrier was proposed. This added member is expected to simplify, or at least minimize, the types of column members required to equidistantly support both added members and noise barriers, which should thereby improve the safety and construction convenience of noise-barrier structures.