• International Journal of Precision Engineering and Manufacturing
• /
• 제3권4호
• /
• pp.78-86
• /
• 2002

In this paper, LMI (Linear Matrix Inequality) based on H$\_$$\infty$/ controller for a lire of sight (LOS) stabilization system. It shows that the proposed controller has more excellent stabilization performance than that of the conventional PI-Lead controller. An H$\_$$\infty$/ control has been also applied to the system for reducing modeling errors and the settling time of the system. The LMI-based H$\_$$\infty$/ controller design is more practical in view of reducing a run-time than Riccati-based H$\_$$\infty$/ controller. This H$\_$$\infty$/ controller is available not only to decrease the gain in PI-Lead control, but also to compensate the identifications for the various uncertain parameters. Therefore, this paper, shows that the proposed LMI-based H$\_$$\infty$/ controller had good disturbance attenuation and reference input tracking performance compared with the control performance of the conventional controller under any real disturbances.

• 한국정밀공학회지
• /
• 제17권5호
• /
• pp.137-144
• /
• 2000

In this paper, a longitudinal control of the lead vehicle for a platoon in IVHS Regulation Layer is proposed. The backstepping method has been used for the controller design. This method has an advantage in that its stability need not be proven since the controller is designed based on the Lyapunov Function. The control object is that the lead vehicle tracks a reference velocity and maintains a safe distance between the inter-platoons while the followers are keeping the speed of the lead vehicle of a platoon. The coordinate of system is transformed to a new coordinate system for its convenience to design controller. The new coordinate system is composed of error and new error variable. The error is the difference between the safe distance and the actual distance of inter-platoons. A new error variable is the difference between the velocity of vehicle and the estimated state of a system operated by the virtual input. The Lyapunov function is obtained based on the variables of new coordinate system. In the computer simulation, several cases have been studied such as when the lead vehicle is tracking the optimal speed. or a lead vehicle of the following platoon tracks the velocity of the previous platoon while maintaining a safe distance. Also a nonlinear engine time constant case has been investigated. All the simulation results show that the designed controller satisfies the control object sufficiently.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 춘계학술대회
• /
• pp.959-962
• /
• 2010

공장 자동화와 로봇공학 등 다양한 산업현장에서 제어 공학은 이용된다. 이러한 제어 공학에서 위치제어와 속도제어를 위해 많은 제어기들이 연구되어 사용되고 있다. 특히, 본 논문에서는 간단하면서 견고한 제어기 중 능동 소자를 이용한 PID (Proportional-Integral-Derivative) 제어기와 수동소자를 이용한 Lead/Lag제어기를 설계하는데 있어 MATLAB 툴을 이용하여 정확한 성능 검증을 수행하려고 한다. 또한, 본 논문에서는 DC 모터를 위해 개선된 PID 및 Lead/Lag제어기 설계하고, 제안한 Lead/Lag 제어기의 효율성을 보여주고자 한다. 제안한 Lead/Lag 제어기는, 단계적인 변수 조정을 통하여 DC 모터 뿐 아니라 복잡한 제어 시스템에 대해서도 효과적으로 응용 가능하다. 결과적으로, 제시된 각 제어기들은 응답시간을 줄인다거나 시스템 에러를 최소화 시키는 등의 산업분야의 문제를 해결하는데 유용하게 사용될 수 있을 것이다.

• Journal of Electrical Engineering and Technology
• /
• 제13권5호
• /
• pp.1908-1916
• /
• 2018

This paper proposes a controller design method for suppressing the resonance generated in the slave motor in the middle and low speed operation range, according to the load and parameter differences between two motors, during parallel operation using the master and slave method that controls two surface permanent magnet synchronous motors connected in parallel by a single inverter. The proposed resonance suppression controller is directly obtained by analyzing the resonance characteristics, using the lead controller method. Therefore, it is possible to fundamentally reduce trial and error to set the controller gain. In addition, because the proposed resonance suppression controller was designed as a lead controller, the stability region of the system increased owing to the added zero point, making the system robust with respect to parametric variations. Simulations and experiments confirmed the usefulness of the proposed method and the system's robustness with respect to parametric variations.

• 정보저장시스템학회논문집
• /
• 제5권1호
• /
• pp.41-46
• /
• 2009

In SIL-based NFR servo systems, the residual error and the overshoot that are occurred in the process of the modes-witching servo which consists of approach, gap-control modes, and safety mode are reduced by using PID controller. However, the design method of conventional PID controller is not sufficient for the stable air gap control system. Therefore, the optimal PID controller using LQR manner is more useful to find the designed parameters of PID controller. In this paper, we show that the performance of the optimal PID controller is better than that of the lead-lag controller.

• 산업기술연구
• /
• 제21권B호
• /
• pp.273-280
• /
• 2001

In this study, a driver model based on the lead-lag controller for stable maneuver of a highly nonlinear, multi-dimensional, numerically stiff multibody vehicle model according to the various handling test requirements such as steady-state cornering, double lange change, etc. is presented The lead-lag controller is developed with lead and lag compensation. which use the transfer function with cross-over frequency by frequency response method. The proposed driver model is applied to a vehicle model in steady-state and slalom maneuver to verify its effectiveness and validity. The results show that the proposed path control strategy is excellent both in pursuing the desired course and stability of the vehicle.

• ETRI Journal
• /
• 제37권6호
• /
• pp.1165-1175
• /
• 2015

This paper presents an advanced sensorless permanent magnet (PM) brushless motor controller integrated circuit (IC) employing an automatic lead-angle compensator. The proposed IC is composed of not only a sensorless sine-wave motor controller but also an isolated gate-driver and current self-sensing circuit. The fabricated IC operates in sensorless mode using a position estimator based on a sliding mode observer and an open-loop start-up. For high efficiency PM brushless motor driving, an automatic lead-angle control algorithm is employed, which improves the efficiency of a PM brushless motor system by tracking the minimum copper loss under various load and speed conditions. The fabricated IC is evaluated experimentally using a commercial 200 W PM brushless motor and power switches. The proposed IC is successfully operated without any additional sensors, and the proposed algorithm maintains the minimum current and maximum system efficiency under $0N{\cdot}m$ to $0.8N{\cdot}m$ load conditions. The proposed IC is a feasible sensorless speed controller for various applications with a wide range of load and speed conditions.

• 전자공학회논문지S
• /
• 제36S권2호
• /
• pp.120-130
• /
• 1999

본 연구에서는 복권형 하이브리드 스테핑 전동기의 회전자 위치 함수로 주어지는 순시 상전류식을 유도하여 Laad Angle에 따른 순시 상전류값의 변화를 보이고, 특히 여자 펄스 인가후 ${\pi}/2$ 시점의 수닛 상전류값으로부터 회전자 위치 정보를 얻을 수 있음을 이론식 및 컴퓨터 시뮬레이션에 의해 확인하였다. 이러한 사실으로부터 복권형 하이브리드 스테핑 전동기의 폐루프 운전을 위해 회전자 위치 검출기를 사용하지 않고 전동기의 파라미터가 고려된 최적 Lead Angle이 실현된 여자 펄스를 생성시키는 제어기를 마이크로컨트롤러에 의해 구성하고 실험하였다. 구성된 제어기는 A/D 변환기, 프로그래머블 입.출력 타이머 및 전동기 속도에 대한 최적 Lead Angle 값을 갖는 변환 테이블 등의 기능을 갖는 마이크로컨트롤러와 또한 전동기의 속도와 여자 펄스 인가후 ${\pi}/2$ 시점의 순시 상전류값에 대한 정토오크 발생영역에 해당하는 Lead Angle 값을 갖는 변환 테이블을 위한 ROM 등으로 구성되어 외부 부가회로를 최소화하였으며, 전동기의 파라미터 등의 변화에 따른 제어량의 병환 테이블이 내용과 제어 S/W 에 의존함으로써 유연성을 확보하였다. 이와 같이 구성된 복권형 하이브리드 스테핑 전동기의 회전자 위 센서리스 최적 Lead Angle 시의 순시 상전류 파형과 유사한 파형을 얻음으로써 최적 Lead Angle 이 실현되었음을 확인할 수 있었다.

• 제어로봇시스템학회논문지
• /
• 제3권2호
• /
• pp.139-148
• /
• 1997

본 논문에서는 비선형 마찰이 존재하는 조준경 안정화 시스템에 대해서 마찰력 보상과 성능개선을 위한 신경망제어기의 설계방법을 제시한다. 제안한 신경망제어기는 비례, 적분, 진상(PI/LEAD) 제어기와 신경회로망과의 병렬로 구성되며, 제어 목적은 비선형 마찰과 외란이 존재하여도 안정거울의 각속도 추적성능과 안정화 성능의 향상에 있다. 신경회로망의 입력으로 안정거울의 각속도 추적오차와 추적오차의 적분, 제어입력이 필터를 통과한 신호가 사용되며, 신경호로망은 간접학습구조에 의해 학습된다. 조준경 시스템의 비선형 마찰력인 쿨롱마찰력의 크기가 외부환경에 따라 변하는 경우와 시스템으로 외란이 인가되는 경우에 대하여도 제안한 병렬제어기는 기존의 PI/LEAD 제어기보다 추적과 안정화 성능면에서 우수함을 컴퓨터 모의 실험으로 확인한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1590-1595
• /
• 2003

Direct drive servovalve(DDV) is a kind of one-stage valve since the rotary motion of DC motor is directly transferred to the linear motion of valve spool through the link. Since the structure of DDV is simple, it is less expensive, more reliable and offers reduced internal leakage and reduced sensitivity to fluid contamination. However, the flow force effect on the spool motion is significant such that it induces large steady-state error in a step response. If the proportional control gain is increased to reduce the steady-state error, the system becomes unstable. In order to satisfy the system design requirements, the lead-lag controller is designed using the complex method that is one kind of constrained direct search method.