• 한국구조물진단유지관리공학회 논문집
• /
• 제16권2호
• /
• pp.1-9
• /
• 2012

철근콘크리트 구조물은 사용연한과 지진 등의 영향으로 균열손상이 주요부재에서 발생되며, 이러한 손상을 보수하기 위해 많은 시간과 노력이 낭비되고 있다. 따라서, 본 연구에서는 소형 리드스위치 센서를 휨시험체 내외부에 매입하거나 부착하여 외력에 의한 균열손상을 스스로 나타내는 스마트 부재에 대하여 연구하였다. 균열손상을 모니터링하기 위해 RF시스템을 리드 스위치센서와 이용하였다. 휨시험체 중앙에 하중이 재하되면 매입되거나 부착된 리드 스위치센서가 파괴되고, 이와 연결된 RF시스템은 손상정보를 전달한다. 본 연구는 무선주파수를 응용한 건축부재의 손상자현 시스템에 대한 기초적 연구이다.

• 한국공간구조학회논문집
• /
• 제13권4호
• /
• pp.83-90
• /
• 2013

PTEF membranes are used for roofing materials of membrane structures. PTEF is the abbreviation of Poly-tetra Fluotide-ethylene. These materials are consisted of fiberglass weave and polyetrfluoroethylene coating. Also, PTEF membranes have some problems of structural capacity by wind or snow load, etc. In this study, sensor housings using lead switches are bonding in PTFE membranes, Monitoring to changes tension and tear damages are studied using radio frequency. If tension is received on edged membranes, bonded lead switches of sensor housings will be destroyed by changes tension, and these become to send signals of damages at the connected radio frequency system with increased tension. Study of these functional membrane materials will be contributed to prevent water leakage and long-term maintenance of membrane structures.

• 조명전기설비학회논문지
• /
• 제27권1호
• /
• pp.61-67
• /
• 2013

The turnout point system is installed to separate the main rail track from other tracks in rail load stations. It is also important to set up the switch point system to change the direction of the turnout point, to lead and change the direction of tracks. The switch point system can be negatively affected by heavy snow during winter seasons which can cause critical safety problems. Furthermore, the maintenance and repair of the conventional system is prohibitively expensive due to its complexity and high probability of failure. In this paper, an efficient switch point system is proposed which simplifies the equipment structure and lowers the cost for maintenance and repair, while improving safety and performance of the rail road system.

• Journal of Chest Surgery
• /
• 제33권3호
• /
• pp.252-256
• /
• 2000

There have been few reports documenting the outcome of arterial swich operations(ASO) in selected patients with transposition of great arteries(TGA) and with left ventricular outflow tract obstruction(LVOTO). In the case of TGA with LVOTO, if the atrial septal defect(ASD) is large and the ventricular septal defect(VSD) is restricive, this deprives the left ventricle(LV) of approporiate preload and could lead to underdevelopment of the ventircular mass and lead poor LV performance after the arterial switch operation, dspite a high pressure in the LV preoperatively. Because an increase in the systolic ventricular pressure is not necessarily paralleled by an increase in ventricular mass, which is also essential for optimal ventricular performance after the operation. We report here a case of rapid LV training after ASO in TGA with unprepared LV (because of large ASD and restrictive VSD) despite a high pressure in the LV(due to LVOTO) preoperatively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 학술대회 논문집 전문대학교육위원
• /
• pp.101-107
• /
• 2007

In this paper, the pulse charger with mode consersion type is proposed that can reuse the waste lead battery. The pulse charger uses the switch mode of the forward convert method. The pulse charger maintain the constant voltage in state removing the lead battery and when it connected the pulse charger, it is converted the charge mode of the constant current immediately. It continues the rapid charge until the full state of the lead battery. After that the pulse charger is converted to the charge mode of constant voltage automatically, and then it continues the normal charge. The experiment results show that the effectiveness of pulse charger such as the good performance and the prolonged durability in lead battery according to capacity states.

• 전기학회논문지P
• /
• 제56권2호
• /
• pp.65-73
• /
• 2007

In this study, the pulse charger and voltage regulator are proposed that can reuse the waste lead acid battery. The first we develop the voltage regulator that can reuse the waste lead battery. And the pulse current is applied to the terminal of the waste lead acid battery. The voltage regulator is available principle of the pulse current which can reduce the sulfate to incipient material such as Pb and PbO2. Therefore the internal resistance of the lead acid battery is decreased, the performance of the lead acid battery is improved and the durability is prolonged. The second we develop the pulse charger using the voltage regulator. The pulse charger uses the switch mode of the forward convert method. The pulse charger maintain the constant voltage in state removing the lead acid battery and when it connected the pulse charger, it is converted the charge mode of the constant current immediately. It continues the rapid charge until the full state of the lead acid battery. After that the pulse charger is converted to the charge mode of constant voltage automatically, and then it continues the normal charge. The experiment results show that the effectiveness of the voltage regulator and pulse charger such as the good performance and the prolonged durability in lead acid battery of the small and large capacity.

• 보건행정학회지
• /
• 제23권2호
• /
• pp.112-123
• /
• 2013

Background: Under the risk of financial sustainability of National Health Insurance, Korean government attempted a series of regulations over pharmaceutical prices. The first price-cut was implemented to the hyperlipidemial treatments, and the prices of statins were reduced on 15th, April in 2009. The purposes of this study are 1) to investigate the impact of this price-cut on pharmaceutical expenditure, and 2) to identify the factors associated with drug-switch among statins. Methods: Using the national patients sample data, this study conducted time series analysis on the expenditures, prices, and volumes of statin drugs. To understand the factors associated with drug-switch, the multinomial logit model was analyzed at the patients level. Results: The results of time series analysis demonstrated that the price-cut of hyperlipidemic medicines did not lead to the reduced expenditure, suggesting the increased volume was the major cause. The multinomial logit analysis identified the switch of healthcare provider as the significant factor that was highly associated with drug-switch, implying the physicians' preference was the major motivation of drug-switch. Conclusion: Without control of utilization, price regulation itself could not reduce pharmaceutical expenditure. This suggests that the pharmaceutical regulations should be implemented on the basis of understanding of provider behaviors. The findings of this study will form the first step for further empirical studies.

• 환경영향평가
• /
• 제15권6호
• /
• pp.453-458
• /
• 2006

A turnout system which permits trains to pass from one track to another consists of the switch, the crossing, lead rails which are necessary to connect the switch and the crossing, two guard rails and a switch machine for operating the switch. A turnout is the sole moving part among the railway components and has complex configuration, so the safety has always been raised an issue. In Korea, it is planned to adopt the high speed tilting train, which operates at the maximum speed of 180km/h, at conventional lines by the year of 2010. However, for the application of the tilting train to conventional lines, it is prerequisite to establish a stable turnout system allowing the tilting train to pass through it without reducing speed. Therefore, the improved turnout system for the speed-up of conventional lines has been developed and the prototype of the turnout system has been constructed. In this study, evaluation of noise characteristics around the improved turnout system was performed through the field measurements. Field measurements of noise around the conventional and the high-speed turnout system were also carried out for the comparison.

• 한국철도학회논문집
• /
• 제10권6호
• /
• pp.735-741
• /
• 2007

철도운행에 있어 분기기는 열차를 주행선로에서 이웃한 선로로 이동시키는 매우 중요한 역할을 수행하는 중요한 장치이다. 우리나라 철도는 기존선의 속도향상을 달성하기 위하여 곡선부가 딴은 우리나라 지형에 적합한 최고운행속도 180 km/h의 틸팅열차를 개발하여 현재 시제차량 제작을 마치고 시운전 시험이 단계적으로 이루어지고 있다. 본 연구에서는 기존선 속도향상을 위해 개발된 틸팅열차가 분기기를 통과할 때 발생하는 소음특성을 현장계측실험을 통해 평가하였다.

• 소성∙가공
• /
• 제22권6호
• /
• pp.317-322
• /
• 2013

A radio frequency(R/F) switch connector is widely used in wireless devices such as mobile phone and navigator to check defects of the circuit board of product. The R/F switch connector shell plays a role in protecting the switch connector. Previously, this part was machined using a turning, which is time-consuming and has poor material utilization. Furthermore, the workpiece material of brass containing lead that has excellent machinability has environmentally regulated during recent years. The purpose of the current study was to develop the connector shell by forming through progressive dies including embossing, burring and forging process in order to achieve higher productivity and dimensional accuracy without tool failure. To accomplish this objective, a strip layout was designed and finite element (FE) analysis was performed for each step in the process. Try-out for the connector shell was conducted using progressive die design based on FE-analysis results. Dimensional accuracy of developed part was investigated by scanning electron microscopy. The result of the investigation for the dimensions of the formed connector shell showed that the required dimensional accuracy was satisfied. Moreover, productivity using the progressive die increased four times compared to previous machining process.