• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.4
• /
• pp.109-116
• /
• 2015

This paper is concerned with the single vendor single buyer integrated production inventory problem. To make this problem more practical, space restriction and lead time proportional to lot size are considered. Since the space for the inventory is limited in most practical inventory system, the space restriction for the inventory of a vendor and a buyer is considered. As product's quantity to be manufactured by the vendor is increased, the lead time for the order is usually increased. Therefore, lead time for the product is proportional to the order quantity by the buyer. Demand is assumed to be stochastic and the continuous review inventory policy is used by the buyer. If the buyer places an order, then the vendor will start to manufacture products and the products will be transferred to the buyer with equal shipments many times. The mathematical formulation with space restriction for the inventory of a vendor and a buyer is suggested in this paper. This problem is constrained nonlinear integer programming problem. Order quantity, reorder points for the buyer, and the number of shipments are required to be determined. A Lagrangian relaxation approach, a popular solution method for constrained problem, is developed to find lower bound of this problem. Since a Lagrangian relaxation approach cannot guarantee the feasible solution, the solution method based on the Lagrangian relaxation approach is proposed to provide with a good feasible solution. Total costs by the proposed method are pretty close to those by the Lagrangian relaxation approach. Sensitivity analysis for space restriction for the vendor and the buyer is done to figure out the relationships between parameters.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.3
• /
• pp.6-13
• /
• 2006

Aerodynamic characteristics for two-dimensional cyclic motion profile of flapping airfoil in low Reynolds number flows are investigated. Plunging motion and lead-lag motion in the two dimensional space with different plunging and lead-lag amplitudes are combined to cyclic motion profile and the flow around the airfoil is simulated. Present result shows that the improved aerodynamic efficiencies for a given flapping airfoil by adding periodic lead-lag motion of airfoil rather than the pure plunging case. The thrust coefficient and lift coefficient are compared with each cycle during the flapping period and aerodynamic characteristics are obtained on upstroke motion and downstroke motion.

• Journal of Veterinary Clinics
• /
• v.14 no.1
• /
• pp.78-87
• /
• 1997

The study of present study was to determine the valuable laboratory tests for the differential diagnosis of lead poisoning in dogs. Sixteen mongrel dogs were divided into 2 experimental groups (A and B) and a control group (C). The A and B groups were administered orally 2 mg and 20 mg of lead per kilogram of body weight for 49 days, respectively. In addition to clinical observation, blood, urine and hair samples were collected on appointed day and examined for hematological changes, lead content of serum, whole blood and hair, and urinary $\delta$-aminolevulinic acid concentrations. All dogs were necropside on 49th day and examined for the lead content and histological changes of organs. The results obtained were summarized as follows: The group B showed digestive and nervous signs, and weight loss. The group A showed no significant hematological changes except polychromatophilla on the 7th day. But group B showed polychromatophilia as well as mild anemia and nucleated erythrocyte on the 7th and 35th day. Basophlic stippling erythrocytes were observed in some of the group B on the 14th day. The lead content of whole blood was increased significantly in both A and B groups on the 21the day. The urinary $\delta$-aminolevulinic acid content was increased in both A and B groups on the 7th day. The hair lead content of A and B groups was increased significantly on the 49th and 21th day, respectively. The lead contents of organs including liver, kidney, spleen, muscle and bone were increased significantly in group B. Histopathologic changes were characterized by hemorrhages, necrosis and intranuclear inclusion body in the epithelial cells of convoluted tubles of kidney, cloudy swelling and degeneration and/or necrosis of liver, enlargement of Virchow-Robin space, and swelling of endothelial cells and hyperplasia of the pericytes of brain. From these results it may be concluded that examination of nucleated erythrocyte/polychromatophilia, urinary $\delta$ -aminolevulinic acid, and whole blood and hair lead contents is a reliable clinico-pathological diagnostic methods, and that examination of the Virchow-Robin space, endothelial cells and pericytes of brain as well as intranuclear inclusion body in the epithelial cells of convoluted tubles of kidney is valualble postmortem diagnostic methods for lead poisoning in dogs.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.12 s.177
• /
• pp.156-162
• /
• 2005

In this paper, we study the mechanism of lead deformation by numerically simulating the stamping process by means of a commercial finite element code. It is very important to analyze effects that the lead shape makes on the lead deformation, because the lead shape is often modified in order to minimize the deformation or to increase the buckling critical load of the punch. Therefore the stamping process, first, numerically simulated by considering as a quasi-static problem. Second, the effect on the lead deformation due to the lead shape variation, a linear lead geometry and a bent lead, was numerically analyzed and discussed. Finally, the punching order was optimized fur multi-lead generating stamping process. The results show that the bent lead is little bit more shifted than the linear lead after the punching process. But the bent lead is vertically less deformed than the linear lead. The punching order to successively generate the lead is good to keep the lead space uniform. The results will be very effectively applied for the design of the blanking or punching dies in industry.

• Journal of Positioning, Navigation, and Timing
• /
• v.12 no.4
• /
• pp.437-445
• /
• 2023

A space system refers to a network of sensors, ground systems, and space-craft operating in space. The security of space systems relies on information systems and networks that support the design, launch, and operation of space missions. Characteristics of space operations, including command and control (C2) between space-craft (including satellites) and ground communication, also depend on wireless frequency and communication channels. Attackers can potentially engage in malicious activities such as destruction, disruption, and degradation of systems, networks, communication channels, and space operations. These malicious cyber activities include sensor spoofing, system damage, denial of service attacks, jamming of unauthorized commands, and injection of malicious code. Such activities ultimately lead to a decrease in the lifespan and functionality of space systems, and may result in damage to space-craft and, lead to loss of control. The Cybersecurity Adversarial Tactics, Techniques, and Common Knowledge (ATT&CK) matrix, proposed by Massachusetts Institute of Technology Research and Engineering (MITRE), consists of the following stages: Reconnaissance, Resource Development, Initial Access, Execution, Persistence, Privilege Escalation, Defense Evasion, Credential Access, Discovery, Lateral Movement, Collection, Command & Control, Exfiltration, and Impact. This paper identifies cybersecurity activities in space systems and satellite navigation systems through the National Institute of Standards and Technology (NIST)'s standard documents, former U.S. President Trump's executive orders, and presents risk management activities. This paper also explores cybersecurity's tactics attack techniques within the context of space systems (space-craft) by referencing the Sparta ATT&CK Matrix. In this paper, security threats in space systems analyzed, focusing on the cybersecurity attack tactics, techniques, and countermeasures of space-craft presented by Space Attack Research and Tactic Analysis (SPARTA). Through this study, cybersecurity attack tactics, techniques, and countermeasures existing in space-craft are identified, and an understanding of the direction of application in the design and implementation of safe small satellites is provided.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.5
• /
• pp.9-18
• /
• 1998

The components with J-lead. which are more integrated and smaller than ones with Gull-wing. are rapidly being used in electronic board such as the PCB, for they have the advantage of occupying a small space compared to the other components. However, the development of inspection system for these new components is not so rapid as component development. Component-inspection with J-lead using vision system is difficult because they are hidden from camera optical axis. X-ray inspection, which has the advantage of inspecting the inside of solder state, is used to J-lead inspection. However. it is high cost and dangerous by leaking out X-ray compared to vision system. Therefore, in this paper, we design vision system suited to J-lead inspection and then propose algorithm which have flexibility in mount and rand error.

• Advances in Computational Design
• /
• v.4 no.2
• /
• pp.141-153
• /
• 2019

This research is comprised of virtually simulating behavior while experiencing low gravity effects in advance of real world testing in low gravity aboard Zero Gravity Corporation's (Zero-G) research aircraft (727-200F). The experiment simulated a drill rig penetrating a regolith simulant. Regolith is a layer of loose, heterogeneous superficial deposits covering solid rock on surfaces of the Earth' moon, asteroids and Mars. The behavior and propagation of space debris when drilled in low gravity was tested through simulations and visualization in a leading dynamic simulation software as well as discrete element modeling software and in preparation for comparing to real world results from flying the experiment aboard Zero-G. The study of outer space regolith could lead to deeper scientific knowledge of extra-terrestrial surfaces, which could lead us to breakthroughs with respect to space mining or in-situ resource utilization (ISRU). These studies aimed to test and evaluate the drilling process in low to zero gravity environments and to determine static stress analysis on the drill when tested in low gravity environments. These tests and simulations were conducted by a team from Texas A&M University's Department of Construction Science, the United States Air Force Academy's Department of Astronautical Engineering, and Crow Industries

• Korean Institute of Interior Design Journal
• /
• v.21 no.4
• /
• pp.106-113
• /
• 2012

As environmental pollution and resource exhaustion have been considered as social issues, interest in green content industries which lead low-carbon green growth is increasing. In various areas, green content products and programs have been presented. Of them, kid theme parks are designed to recognize fun and advantages eco-friendly consumption with green contents has and lead children to recognize the problems of environmental pollution and the importance of environment. This study aims to analyse kid theme parks using green contents and characteristics of their space representation. The analysis frame was made through theoretical examination for bibliographical data and a direct interview in terms of factors of green contents. For the analysis frame, visitors were directly interviewed from June to July, 2012. Cases of introduction were analysed to identify realization and characteristics of green contents. As a result of the analysis, it was discovered that kid theme parks using green contents pursued green stories, but they did not consider environment seriously in terms of content materials and methods of realization. To develop successful kid theme parks using green contents, multi-dimensional research is needed in various aspects and various contents such as media should be introduced. The parks should provide fun space for children and propagate green ideas. Its success can lead in green entertainment. The study will be helpful for design of future kid theme parks.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.3
• /
• pp.394-400
• /
• 2008

A known nonlinear compensator design approach is adapted to allow design of nonlinear lead and/or lag compensators, and a number of MATLAB functions are developed that automate the compensator design procedure. With this design tool, control engineers would be able to rapidly design nonlinear lead and/or lag compensators. An example of a tutorial nature is presented.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.51 no.7
• /
• pp.387-398
• /
• 2002

In this paper, a new Three-Phase Lead-Lag Random Pulse Position PWM(LL-RPWM) scheme is proposed and implemented for decreasing audible acoustic noise of motor drives. In the proposed RPWM(Random PWM), each of three phase pulses is located randomly in each switching interval. Based on the space vector modulation technique, the duty ratio of the pulses is calculated. Along with the randomization of the PWM pulses, we can obtain the effects of spread spectra of voltage, current as in the case of randomly changed switching frequency. To verify the validity of the proposed LL-RPWM, the simulation and experimental study was tried. Along with the randomization PWM pulses, the space vector modulation is also executed in the C167 micro-controller. The simulation and experimental results show that the voltage and current harmonics are spread to a wide band area and that the audible acoustic noise is reduced by the proposed RPWM method.