• Journal of Korea Water Resources Association
• /
• v.54 no.spc1
• /
• pp.1131-1141
• /
• 2021

In this study, the artificial neural network model is applied for real-time dam inflow prediction and then evaluated for the prediction lead times (1, 3, 6 hr) in dam basins in Korea. For the training and testing the model, hourly precipitation and inflow are used as input data according to average annual inflow. The results show that the model performance for up to 6 hour is acceptable because the NSE is 0.57 to 0.79 or higher. Totally, the predictive performance of the model in dry seasons is weaker than the performance in wet seasons, and this difference in performance increases in the larger basin. For the 6 hour prediction lead time, the model performance changes as the sequence length increases. These changes are significant for the dry season with increasing sequence length compared to the wet season. Also, with increasing the sequence length, the prediction performance of the model improved during the dry season. Comparison of observed and predicted hydrographs for flood events showed that although the shape of the prediction hydrograph is similar to the observed hydrograph, the peak flow tends to be underestimated and the peak time is delayed depending on the prediction lead time.

• Journal of Environmental Science International
• /
• v.24 no.12
• /
• pp.1705-1710
• /
• 2015

The aim of the present study was to determine the effects of soil microbial agent with red ginseng marc on growth of watermelon during 5 months. The three treatments were distributed in a completely randomized design with four replicates per plot. After 1 week in planting dates, the growth of watermelon (full length, stem thichness, leaf length and lead width) showed no significant difference in all treatments. During elongation stage (20 days), soil microbial agent with red ginseng marc was increased by 5% in leaf thickness (May 23) and 7~14% in leaf length (May 16 and 23) when compared to other treatments. For changes in fruit bearing thickness, there were no differences among treatments. Characteristics of watermelon in harvest season have an effect on harvest and length, stalk length, naval length, weight, sugar content and yield, except for harvest and width. In particular, yields increased with treatments with two soil microbial agent (7~12%), indicating that soil microbial agent with red ginseng marc showed higher yield than the other treatments. In conclusion, red ginseng marc-treated soil microbial agents have a positive effect on the harvest season of watermelon and can provide useful information for the selection of the functional microbial properties and the registration of microbial fertilizer.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.4
• /
• pp.475-482
• /
• 2010

Thirty-six Najdi ram lambs, weighing an average of 24 kg and circa 3 months old, were utilized in this trial to evaluate the effects of various alfalfa hay particle lengths in the diet on growth performance, digestion coefficients, nitrogen retention and carcass characteristics. Lambs were randomly allotted to three dietary treatments: 9.5 and 14 mm diets, where alfalfa hay was processed to 9.5 and 14 mm particle lengths, respectively, mixed with 3 parts of concentrate and pelleted as a total mixed ration (TMR), and long hay diet, where one part of loose alfalfa hay (17.8${\pm}$2.4 cm) was offered in combination with 3 parts of only-concentrate pellet. All dietary treatments were homogeneous in their ingredient composition. All lambs were slaughtered after a 14-week feeding trial. Although the results showed no significant effect of hay particle length on DMI, TDN and DCP, lambs fed the 9.5 mm pelleted diet had higher (p<0.05) final body weight, ADG, gain efficiency and nitrogen retention than lambs fed the 14 mm and long hay diets. Altering the particle length of alfalfa hay in diets did not affect the digestibility of DM or CP, whereas digestibilities of ADF and NDF were 3.7% and 5.4% higher (p<0.05), respectively, for the long hay diet versus the 9.5 mm pelleted diet. Hot carcass weight, percentage of separable lean from the $9-11^{th}$ rib joint, and percentages of protein and EE in the separable lean increased (p<0.05) as the particle length of alfalfa hay in the diet decreased. Under the conditions of this study, the reduction of particle length in the TMR played an important role in enhancing performance without altering DM consumption, and this may lead to more efficient productivity of lamb fattening compared with longer chopping lengths.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.4
• /
• pp.321-328
• /
• 2014

The performance characteristics of a subscale diffuser under non-reacting conditions for high-altitude simulation were numerically investigated with respect to different lengths of the secondary throat diffuser. The ratio of the length of the diffuser entrance to the nozzle exit diameter was set to 0, 50, and 100%. In addition, flow characteristics were studied for a range of length-to-diameter ratios of the secondary throat diffuser. An insufficient diffuser entrance length caused contraction of the plume immediately after the nozzle exit. When the length-to-diameter ratio was less than 8, a strong Mach disk was formed inside the diffuser, resulting in a sharp increase in pressure. In addition, flow characteristics in the diverging part of the diffuser were investigated for a range of diverging part lengths. A short diverging part may lead to abrupt pressure recovery, resulting in the possible application of mechanical load to the diffuser.

• Physical Therapy Rehabilitation Science
• /
• v.9 no.3
• /
• pp.155-164
• /
• 2020

Objective: This study aimed to compare muscle structure, balance, and gait parameters between healthy adults and persons with stroke and to analyze the correlation among these variables. Design: Cross-sectional study. Methods: Twenty persons with stroke (11 male, 9 female) and twenty healthy participants (9 male, 11 female) were included. Ultrasound images of the triceps surae and the tibialis anterior were acquired in sitting resting, sitting co-contraction, and standing resting positions and also during the functional reach test (FRT) and single leg anterior reaching test (SLART). Muscle thickness and fascicle length were measured. Spatiotemporal parameters of gait were measured using a pressure walkway. Gait speed, cadence, step length, stride length, stance time, and swing time were measured. Results: Changes in percent fascicle length were significantly greater in the gastrocnemius and soleus (SOL) muscles of healthy adults in the sitting co-contraction position (p<0.05). The percent fascicle length of the SOL in FRT and SLART were significantly greater in healthy adults (p<0.05). The mid-stance phase of stroke patients was shorter than healthy adults (p<0.05). A negative correlation was observed between percent fascicle length of the SOL in the sitting co-contraction position and the proportion of the mid-stance phase (p<0.05). Conclusions: The function of the triceps surae is affected in persons with stroke when compared with healthy adults. This can lead to difficulty in performing tasks that involve forward transfer of weight. If the triceps surae is not sufficiently secured, the possibility of compensation in the stance phase increases during gait.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10b
• /
• pp.1867-1872
• /
• 1991

A method of estimating mechanical parameters of the intact human muscle is proposed; force responses to ramp length perturbation of the muscle both at the resting and constant contracting states are compared with those of the model. The response during the short period (50ms) after the onset of the perturbation is used for the estimation. Time course of the length perturbation which could lead to the accurate estimation is determined by model analysis. Availability of this method is showed by applying it to the human thumb flexor muscle.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1369-1375
• /
• 2004

For many years and primarily for economical reasons, Dissimilar Metal Welds have been used as transition joints in a variety of equipment and applications. But Dissimilar Metal Welds have several fabrication and metallurgical drawbacks that can often lead to in-service failures. For example, the most pronounced fabrication faults are hot cracks. Laser welding techniques have been characterised for various materials. In this paper, the laser weldability of STS304 stainless steel and SM45C at dissimilar metal welds using a continuous wave Nd：YAG laser are experimentally investigated. An experimental study was conducted to determine effects of welding parameters, on eliminating or reducing the extent welding zone formation at dissimilar metal welds and to optimize those parameters that have the most influence parameters such as focus length, power, beam speed, shielding gas, and wave length of laser were tested

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.23 no.6
• /
• pp.443-450
• /
• 1990

The virtual population analysis technique was applied to the silver croaker, Otolithes argenteus, stock based on length frequency composition, age-length key and nominal catches taken by the trawl fleet and fixed-stake nets in the Kuwait's waters during $1981\~1988$. One-year-old fish was dominant, whereas three-year-old and older fish were at a very low level. Fishing mortality was much higher in the age groups of 2 and 3 than in the others. A strong year-class occurred in 1980 and 1981. Population size of fishable stock markedly decreased from 1982 to 1985 and remained at a low level during $1986\~1987$. The effects of changes in fishing effort showed that an increase in fishing effort would not lead to benefits in yield and would comprise more young and fewer old fish, whereas a reduction in fishing effort to a certain level (by $20\~40\%$ ) from the fishing effort level on the average during $1981\~1988$ could bring some small advantage to the fishery consisting of fewer young and older fish.

• Journal of the Korean Statistical Society
• /
• v.33 no.2
• /
• pp.219-231
• /
• 2004

Process adjustment is a complimentary tool to process monitoring in process control. Although original intention of process adjustment is not identifying a special cause, detection and elimination of special causes may lead to significant process improvement. In this paper, we examine the impact of special causes on process adjustment. The bias in the adjusted output process is derived for each type of special causes, and average run length (ARL) of the Shewhart chart applied to the adjusted output is computed for each special cause types. Numerical results are illustrated for the ARL of the Shewhart chart, thereupon seriousness of special causes on process adjustment is evaluated for each type of special causes.

• Communications for Statistical Applications and Methods
• /
• v.5 no.3
• /
• pp.645-657
• /
• 1998

During the start-up of a process or in a job-shop environment conventional use of control charts may lead to erroneous results due to the limited number of subgroups used for the construction of control limits. This article considers the effect of using estimated control limits based on a limited number of subgroups. Especially we investigate the performance of $\overline{X}$ and R control charts when the data are independent, and X control chart when the data are serially correlated in terms of average run length(ARL) and standard deviation run length(SDRL) using simulation. It is found that the ARL and SDRL get larger as the number of subgroups used for the construction of the chart becomes smaller.