• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.34 no.3
• /
• pp.274-282
• /
• 1998

This study deals with sinking resistance for purse seine, in the case of different d/l, ratio of twine diameter and leg length. Experiments carried out on the six types simplified reduced model seines which were made of knotless netting. The nettings were woven in different leg length 4.3, 5.0, 5.5, 6.0, 6.6 and 7.7mm of polyester 28 tex two threads two -ply twine, and each of the seines were named I, II, III, IV, V and Ⅵ seine. Dimension of seine models were 450cm for corkline and 85cm for seine depth, each seines rigged up 160g of float for a floatline and 50g (underwater weight) of lead for a leadline. Experiments were measured in the observation channel of a flume tank at the static conditions Sinking motion was recorded by the two sets TV-camera for VTR which were placed in top and side of the model seine, and reading coordinate carried out by the video digitization system. An analysis were calculated out by simultaneous differential equations for numerical method by Runge - Kutta - Gill sub - routine. The results obtained were as follows: 1. Average sinking speed of seine of seine margin was fastest for Ⅵ seine followed by V, IV, III, II and I seines. 2. The coefficient of resistance for a seine wall was depended upon the ratio of d/l : KD =0.081 (d/l )-0.5 3. The coefficient of resistance for netting bundle was not depended upon the ratio of d/l :CR = 0.91 (), d : Twine diameter, l : Leg length, : Density of netting materals, $\omega$ : Density of water

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.150.1-150.1
• /
• 2014

Showerhead is used as a main part in the semiconductor equipment. The face plate flatness should remain constant and the cleaning performance must be gained to keep the uniformity level of etching or deposition in chemical vapor deposition process. High operating temperature or long period of thermal loading could lead the showerhead to be deformed thermally. In some case, the thermal deformation appears very sensitive to showerhead performance. This paper describes the methods for robust design using computational fluid dynamics. To reveal the influence of the post distribution on flow pattern in the showerhead cavity, numerical simulation was performed for several post distributions. The flow structure appears similar to an impinging flow near a centered baffle in showerhead cavity. We took the structure as an index to estimate diffusion path. A robust design to reduce the thermal deformation of showerhead can be achieved using post number increase without ill effect on flow. To prevent the showerhead deformation by heat loading, its face plate thickness was determined additionally using numerical simulation. The face plate has thousands of impinging holes. The design key is to keep pressure drop distribution on the showerhead face plate with the holes. This study reads the methodology to apply to a showerhead hole design. A Hagen-Poiseuille equation gives the pressure drop in a fluid flowing through such hole. The assumptions of the equation are the fluid is viscous-incompressible and the flow is laminar fully developed in a through hole. An equation can be expressed with radius R and length L related to the volume flow rate Q from the Hagen-Poiseuille equation, $Q={\pi}R4{\Delta}p/8{\mu}L$, where ${\mu}$ is the viscosity and ${\Delta}p$ is the pressure drop. In present case, each hole has steps at both the inlet and the outlet, and the fluid appears compressible. So we simplify the equation as $Q=C(R,L){\Delta}p$. A series of performance curves for a through hole with geometric parameters were obtained using two-dimensional numerical simulation. We obtained a relation between the hole diameter and hole length from the test cases to determine hole diameter at fixed hole length. A numerical simulation has been performed as a tool for enhancing showerhead robust design from flow structure. Geometric parameters for the design were post distribution and face plate thickness. The reinforced showerhead has been installed and its effective deposition profile is being shown in factory.

• Development and Reproduction
• /
• v.5 no.1
• /
• pp.1-8
• /
• 2001

Golden hamsters show the reproductive activity that is determined by the photoperiod (length of light per day). Photoperiod is an environmental factor that is predictable through an entire year. The hamsters are sexually active in summer during which day length exceeds night time. The critical length is at least 12.5 hours of light in a day where reproductive function is maintained. The information of photoperiod is mediated by the pineal gland because removal of pineal gland blocks the influence of photoperiod on reproductive activity. The hamsters without pineal gland maintain sexual activity and promote it in a situation that suppresses gonadal activity. The pineal gland secretes melatonin that reflects the photoperiod. The appropriate administrations of melatonin into both pineal intact and pinealectomized hamsters lead to a gonadal reression. The results suggest that melatonin constitutes a part of control mechanism whereby environmental information is transduced to neuroendocrine signal respensible for the functional integrity of the reproductive system. Despite of the intense studies, the action site of melatonin is on the whole unknown. It is mainly due to the lack of acute efffct of melatonin on the secretion of reproductive hormones. However, sexually regressed animals display the low levelsof gonadotropins and the augmentation of the hypothalamic gonadotropin-releasing hormone (GnRH) content, implying that the antigonadotropic effects either by photoperiod and/or by the treatment of melatonin are mediated by the GnRH neuronal system. The action mechanism by which melatonin exerts its effect on GnRH neuron needs to be investigated. Recent cloning of melatonin receptor will contribute to examine various and putative potencies of melatonin via its anatomical identification and the action mechanism of melatonin on target tissues at the molecular level.

• Journal of the Economic Geographical Society of Korea
• /
• v.15 no.1
• /
• pp.77-94
• /
• 2012

The purpose of this study is to analyze the process of vertical fragmentation of regional industries in Korea using Revealed Comparative Advantage index (RCA) and Average Propagation Length (APL). First of all, the competitiveness in regional export and substitution of regional imports were strong in the Electricity, Gas, and Water supply sector in Gyeongnam, and consumer-oriented Manufacturing sector in Incheon, Gyeongnam, and Gwangju. The high values of the APL were also found in the regions with common similarity with respect to the industrial structure and the sectors with indirect effects. In addition, the industrial sectors with high quality of infrastructure, and endowed services tended to be located in the beginning of the production chain. FInally, since manufacturing and service sectors in Seoul has higher APL, they could lead the growth of other related industries as key sectors, in the production fragmentation.

• Journal of the Korean Geosynthetics Society
• /
• v.20 no.4
• /
• pp.19-32
• /
• 2021

In this study, evaluation and consideration of domestic/overseas design, construction, and quality control performed by the authors on the deep cement mixing method were performed, and improvements for the development of the DCM method were suggested in the future. As a result of this study, it was found that the cross-sectional area correction for strength is required during the laboratory test of mix proportion, and caution is required because the extrapolation method may lead to different results from the actual one. Applicable design methods should be selected in consideration of both the improvement ratio and the type of improvement during design, and it was confirmed that the allowable compressive strength to which the safety factor was applied refers to the standard value for stability review and not the design parameters. In the case of the stress concentration ratio, rather than applying a conventional value, it was possible to perform economical design by calculating the experimental and theoretical stress concentration ratio reflecting the design conditions. In the case where pre-boring is expected during construction, if the increased water content is not large compared to the original, there were cases where a major problem did not occur even if the result that did not consider the increase in water content was used. In addition, it was confirmed that when the ratio of the top treatment length to the improved length is high, a small amount of design cement contents per unit length can be injected during construction. In the case of quality control, it was evaluated that D/4~2D/4 for single-axis and D/4 point for multi-axis were optimal for coring of grouting mixtures. As an item for quality control, it is judged that the standard that considers the TCR along with the unconfined compressive strength of grouting mixtures is more suitable for the domestic situation.

• Journal of Korean Public Health Nursing
• /
• v.15 no.2
• /
• pp.239-248
• /
• 2001

The purpose of this study was to analyze risk factors for nosocomial pneumonia in patients admitted to NS ICU, and to provide a basic data to decrease respiratory nosocomial infection rate engendered from medical environments in NS ICU. The study site was the NS ICU at a university hospital located in Seoul, Korea. The subjects were 31 patients diagnosed with nosocomial pneumonia, who were selected from the initial list of 300 potential subjects who had been a) admitted between September 1999 and January 2000, and September 2000 and January 2001, b) resided at the NS ICU over 72 hours. The diagnostic standard of nosocomial pneumonia was based on the nosocomial infection guides of C university hospital. The data were analyzed using frequencies and logistic regression analysis. The sputums obtained from the subjects were cultivated and causal viruses were separated. The results were as follows: 1. The nosocomial pneumonia rate was $10.3\%$. There were 7 types of causal viruses separated from the sputum. and the most prevalent type of virus was MRSA as $62.2\%$. 2. The factors significantly influencing the incidence of nosocomial pneumonia included age, the residential duration at the NS ICU, GCS scores, diabetes mellitus, insertion of tracheal tube and its duration, tracheostomy and its length of insertion, the use of artificial ventilator and the length of its use, and the insertion of naso-gastic tube. The most significant risk factor among these was the insertion of tracheal tube (odds ratio=18.684. $95\%$ CI=6.849-50.974), followed by the use of tracheostomy (odds ratio=15.419, $95\%$ CI=6.615-35.942), the insertion of naso-gastric tube (odds ratio=14.875, $95\%$ CI=6.396-34.595), and the use of artificial ventilator (odds ratio=13.000. $95\%$ CI=5.633­30.001). 3. Regarding the use of the mechanical aids, the insertion of tracheal tube resulted in 12.968 times increase of the nosocomial pneumonia rate, and the use of artificial ventilator lead 6.714 times increase of the nosocomial pneumonia rate. One point increase of the GCS score resulted in the 1.210 times increase of the nosocomial pneumonia rate. For patients who had tracheal tube, tracheostomy, and artificial ventilator, one day increase of their residential duration at NS ICU lead 1.073 times increase of the nosocomial pneumonia rate. 4. In terms of duration of the mechanical aid usage, one day increase in the use of artificial ventilator engendered 1.080 times increase in the nosocomial pneumonia rate. One day increase of the residential duration at the NS ICU lead 1.604 times increase in the nosocomial pneumonia rate. As one point of the GCS score increased, 0.876 times decrease of the nosocomial pneumonia rate was reported. These study findings show that the risk factors significantly influencing the incidence of nosocomial pneumonia include the use of tracheal tube, tracheostomy, naso-gastic tube, and artificial ventilator. It is recommended that nurses working at NS ICU should pay more attention to the patients with these factors as the risky group for the nosocomial pneumonia, and thus make more active efforts to provide nosocomial pneumonia prevention strategies for them. In further studies patients admitted to the different types of ICUs such as internal medicine or surgery unit ICU will be also included, and more wide investigation of nosocomial pneumonia risk factors will be conducted through one-year longitudinal follow up.

• Journal of Oral Medicine and Pain
• /
• v.33 no.2
• /
• pp.121-132
• /
• 2008

To establish the diagnosis and treatment plan for skeletal Class II malocclusion, patient's skeletal morphology, prognosis as well as the treatment effect is one of the important factor to consider. Therefore, the present study classified analyzed the difference between initial(T1) and after use of activator(T2), and after finish of direct multi-bonding system treatment(T3) for Class II malocclusion during growth period according to the treatment result(effective body length) and morphology of vertical skeletal type. The experimental group was classified into two groups(1 group, 2 group) according to the effective body length change between before and after use of activator, showed good treatment effect of activator for patient with small mandible and large differential between maxilla and mandible, and short anterior facial height. And the difference between 1 and 2 group in the experimental group before treatment(T1) disappeared in the finished treatment(T3). But in contrast, the initial difference of T1 stage between a and b group in the control group did not disappear in the finished treatment(T3). In short, experimental group's treatment effect was much better than contrast group and the treatment effect was maintained and got stable results at comparison experimental group with contrast group. Through this study, we can find activator's treatment effect and stable retention of that in growing Class II malocclusion patients. By estimate of activator treatment effect through these results, we can establish the correct diagnosis and treatment plan for adolescent Class II malocclusion estimate of activator treatment effect and lead the ideal facial growth pattern.

• Journal of the Korean Society of Radiology
• /
• v.5 no.5
• /
• pp.303-308
• /
• 2011

Background/Aims : The increasing use of diagnostic and therapeutic interventional radiology calls for greater consideration of radiation exposure risk to radiologist and radiological technician, and emphasizes the proper system of radiation protection. This study was designed to assess the effect of a protective grass shield. Methods : A protective grass was following data depth, 0.8 cm; width, 100 cm; length, 100 cm, lead equivalent, 1.6 mmPb. The protective shield was located between the patient and the radiologist. Thirty patients (13 male and 17 female) undergoing interventional radiology between September 2010 and December 2010 were selected for this study. The dose of radiation exposure was recorded with or without the protective grass shield at the level of the head, chest, and pelvis. The measurement was made at 50 cm and 150 cm from the radiation source. Results : The mean patient age was 69 years. The mean patient height and weight was $159.7{\pm}6.7$ cm and $60.3{\pm}5.9$ kg, respectively. The mean body mass index (BMI) was $20.5{\pm}3.0$ kg/m2. radiologists received $1530.2{\pm}550.0$ mR/hr without the protective lead shield. At the same distance, radiation exposure was significantly reduced to $50.3{\pm}85.2$ mR/hr with the protective lead shield (p-value<0.0001). The radiation exposure to radiologist and radiological technician was significantly reduced by the use of a protective lead shield (p value <0.0001). The amount of radiation exposure during interventional radiology was related to the patient' BMI (r=0.749, p=0.001). Conclusions : This protective shield grass is effective in protecting radiologist and radiological technician from radiation exposure.

• Journal of Korean Neurosurgical Society
• /
• v.61 no.4
• /
• pp.503-508
• /
• 2018

Objective : Anterior odontoid screw fixation is a safe and effective method for the treatment of odontoid fractures. The surgical technique is recommended for perforation of the apical cortex of the dens by the lag screw. However, overpenetration of the apical cortex may lead to potentially serious complications such as damages of adjacent vascular and neural structures. The purpose of this study was to assess the role of three-dimensional computed tomography (CT) scan to evaluate the safe margin beyond dens tip to ventral dura for anterior odontoid screw fixation. Methods : We retrospectively analyzed the three-dimensional CT scans of the cervical spines in 55 consecutive patients at our trauma center. The patients included 38 males and 17 females aged between 22 and 73 years (mean age${\pm}$standard deviation, $45.8{\pm}14.2years$). Using sagittal images of 3-dimensional CT scan, the safe margins beyond dens tip to ventral dura as well as the appropriate screw length were measured. Results : The mean width of the apical dens tip was $9.6{\pm}1.1mm$. The mean lengths from the screw entry point to the apical dens tip and posterior end of dens tip were $39.2{\pm}2.6mm$ and $36.6{\pm}2.4mm$. The safe margin beyond apical dens tip to ventral dura was $7.7{\pm}1.7mm$. However, the safe margin beyond the posterior end of dens tip to ventral dura was decreased to $2.1{\pm}3.2mm$, which was statistically significant (p<0.01). There were no significant differences of safe margins beyond dens tip to ventral dura with patient gender and age. Conclusion : Extension by several millimeters beyond the dens tip is safe, if the trajectory of anterior odontoid screw is targeted at the apical dens tip. However, if the trajectory of the screw is targeted to the posterior end of dens tip, extension beyond dens tip may lead to damage immediately adjacent to the vental dura mater.

• Journal of Korean Society for Atmospheric Environment
• /
• v.2 no.1
• /
• pp.11-21
• /
• 1986

The study was performed to investigate the effects of gaseous imission of sulfur dioxide and hydrogen fluoride on the growth of rice plant under stressed field conditions. The plants were cultivated in normal paddy fields where are 88 industrial plants operating with 285 smoke stacks emitting pollutants. There has been a number of reported studies (1, 3, 11, 19, 20) which deal with rice plant damages by air pollution under a simulated exposure experimental condition. Furthermore, these experiments were conducted to examine effects of a single pollutant on the plant. Furthermore, these experiments were conducted to examine effects of a single pollutant on the plant. In korea, however, there is no study reported in literature with respect to the in-situ dose-response relationship between rice pant reduction in yields and air pollution. This study is specifically dealt with multiple effects of sulfur dioxde and hydrogen fluoride on various plant growth indicators such as leaf damage, culm height, weight of grain, panicles per hill, spikelets per panicle and percent fertility.It appears that there is a good correlation between ambient concentrations of sulfur oxides and sulfur contents found in leaves with an average correlation coefficient of 0.868 within a 1% significance level. It is interesting to note that a better multiple correlation was found between percent leaf damage and sulfur and fluoride contentd found in leaf with a significance of 1% level. The yearly correlation coefficient ranges from 0.963 to 0.987 with an average being 0.971. It is, therefore, believed that a percent leaf damage may serve as a single indicator of pollutional damages to rice plant cultivating in fields. Regarding other factors to the diminution of rice plant growth in polluted atmosphere, it appears that a significant correlation to culm length and dry weight of grain with a 1% significance level whereas T/R ratio has a good correlation with lead damage within 5% significance level. An evaluation of data observed has demonstrated that both panicles per hill and percent fertility are significantly affected by air pollutants. As expected, hydrogen fluoride has more effects than sulfur oxide. It is, however, interesting to note that spikelets per panicles has slightly been affected while no indication of effects on 1000-grain-weight has been observed. This may lead to a conclusion that a reduction in yield of rice under polluted field conditions may have more been caused by the diminution of panicles per hill and percent fertility rather than by the diminution of spikelets per panicle and grain weight.