• Proceedings of the Korea Concrete Institute Conference
• /
• 1992.04a
• /
• pp.47-52
• /
• 1992

The entire nonlinear behavior of reinforced concrete frames up to collapse, is analyzed by the displacement control method and the combined layered and nonlayered method. All of the rigidities of section are calculated approximately by a sum over all the layers for the layered method, are used the integral values over the cross section area for the nonlayered method. The spurious sensitivity to the chosen element size in the result of analysis by finite element method for the materials with strain-softening can be overcome by modifying the strain distribution based on the concept of fracture energy at plastic hinge considering the applied axial load.

• Structural Engineering and Mechanics
• /
• v.14 no.3
• /
• pp.245-262
• /
• 2002

The free vibration analysis of stiffened laminated composite plates has been performed using the layered (zigzag) finite element method based on the first order shear deformation theory. The layers of the laminated plate is modeled using nine-node isoparametric degenerated flat shell element. The stiffeners are modeled as three-node isoparametric beam elements based on Timoshenko beam theory. Bilinear in-plane displacement constraints are used to maintain the inter-layer continuity. A special lumping technique is used in deriving the lumped mass matrices. The natural frequencies are extracted using the subspace iteration method. Numerical results are presented for unstiffened laminated plates, stiffened isotropic plates, stiffened symmetric angle-ply laminates, stiffened skew-symmetric angle-ply laminates and stiffened skew-symmetric cross-ply laminates. The effects of fiber orientations (ply angles), number of layers, stiffener depths and degrees of orthotropy are examined.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1356-1358
• /
• 2003

In the paper, a method making use of the characteristics of Dyad Green Function (DGF) and Fluctuation-Dissipation Theorem to get the brightness temperature of layered medium is introduced. Based on the approach and the measured data of multi-channel radiometer and Least Square Method (LSM), the thickness of lunar soil can be retrieved. These methods are significant to study on materials on lunar surface.

• Journal of the Korean Society of Costume
• /
• v.59 no.3
• /
• pp.131-144
• /
• 2009

This study is about single-layered $Chog{\breve{a}}ri$ excavated from SongHyosang(宋效商, 1430-1490, SHS hereafter), SongHeeJong(宋喜從, the late 1500s, SHJ hereafter) tombs. There are 7 single-layered $Chog{\breve{a}}ris$ for men. We focus on comparison of their design and sowing method. 1. Design: Investigating collar, $Chog{\breve{a}}ris$ from SHS have MokpanGit and $Chog{\breve{a}}ris$ from SHJ have KalGit. KalGit has been seen from SHJ to 17th, 18th and 19th centuries. After the late 1500s, there is no MokpanGit single-laTered $Chog{\breve{a}}ri$ for men. Side panel under arm has various shapes(triangle, trapezoid, triangle+trapezoid) in 15th century. After the late 1500s, It changes into no side panel. Two $Chog{\breve{a}}ris$ with no side panel from SHJ reveals that the late 1500s is a period of transition. 2. Sewing method: First, researching lengthwise grainline of the fly, the left fly has lengthwise grainline outside In four, inside in three. The right fly has lengthwise grainline outside in just one, the others have lengthwise grainline inside. Compared with today's way, there is a great difference, but in those times there isn't an established rule. This is true of side panel under arm. The sewing method are backstitch, running stitch, and hemming. Researching the construction method of seam, in putting two selvages together, open seam and plain seam are used. In putting selvage and bias, bias and bias together, flat felled seam and french seam are used. This study shows that single-layered $Chog{\breve{a}}ri$ far men from 15C. to 16C. has changes of design such as collar(Git) and side panel undo. arm. But there is little change in sewing method.

• Journal of the Korean Home Economics Association
• /
• v.50 no.6
• /
• pp.55-64
• /
• 2012

This study aims to reinterpret formative elements of Baeja, by applying them to the design of modern clothing. The main objective of the studying Baeja is to propose unique layered look items that can be readily put together for various weather conditions and occasions, be easily wearable and bring out unique individualities. After carefully studying Baeja from Joseon dynasty, flexible and practical layered-look items are designed. The following are the conclusions drawn from the work. First, it is possible to apply Baeja elements, such as the silhouette, traditional materials, and colors, to modern clothes, for a layered-look. Second, Baeja characteristics have a profound potential for a modern layered-look design, in that it is sleeveless, its length is long at the front and short at the back, and it comes with slits on both sides and a wide belt. The items inspired by such characteristic can easily be worn over and draped around daily clothes, according to weather conditions and occasions. Third, many decorative elements of Baeja, including detailed ornamental method, knots, patchworks, and string decorations create a unique and traditional image in modern clothes. Ribbonswhich can adjust the width of clothes are both practical and decorative. A reversible jacket is created by utilizing the same traditional sewing method for both inner and outer fabrics. One item can be worn in different styles, which increases practicality. Fourth, traditional and modern materials go well together. Such methods can create an item with both modern sensibility and traditional chic.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.6
• /
• pp.47-57
• /
• 2009

In this study, the ultimate lateral load capacity of pile driven into multi-layered soil was estimated using cone penetration test results and a method was proposed to reflect multi-layered soil conditions. For multi-layered specimens prepared with different relative density at different layers, the cone penetration tests and lateral pile load tests were conducted. Based on the test results, measured and estimated values of the ultimate lateral load were compared and analyzed. The estimated results were obtained from the methods proposed by Broms (1964), Petrasovits & Award (1972) and Prasad & Chari (1999). The method was proposed for modifying the earth pressure distribution of Prasad & Chari (1999) to consider multi-layered soil conditions. From the analysis, it was seen that results obtained from the proposed method showed improvement with less data scatter similarly to those obtained from Broms (1964) and Petrasovits & Award (1972)'s methods.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.11
• /
• pp.1785-1795
• /
• 2001

A multi-layered brick element fur the finite element method is developed for analyzing the three-dim-ensionally layered composite structures subjected to both thermal and mechanical boundary conditions. The element has eight nodes with one degree of freedom for the temperature and three for the display-ements at each node, and can contain arbitrary number of layers with different material properties with-in the element; the conventional element should contain one material within an element. Thus the total number of nodes and elements, which are needed to analyze the multi-layered composite structures, can be tremendously reduced. In solving the global equation, a partitioning technique is used to obtain the temperature and the displacements which are caused by both the mechanical boundary conditions and temperature distributions. The results by using the developed element are compared wish the commercial package, ANSYS and the conventional finite element methods, and they are in good agreement. It is also shown that the Number of nodes and elements can be tremendously reduced using the element without losing the numerical accuracies.

• Earthquakes and Structures
• /
• v.24 no.1
• /
• pp.65-79
• /
• 2023

A simplified analytical solution for seismic response of tunnel cross section in horizontally layered ground subjected to oblique incidence of SH wave is deduced in this paper. The proposed analytical solution consists of two main steps: free-field response in layered field and tunnel response. The free field responses of the layered ground are obtained by one-dimensional finite element method in time domain. The tunnel lining is treated as a thick-wall cylinder to calculate the tunnel response, which subject to free field stress. The analytical solutions are verified by comparing with the dynamic numerical results of two-dimensional ground-lining interaction analysis under earthquake in some common situations, which have a good agreement. Then, the appropriate range of the proposed analytical solution is analyzed, considering the height of the layered ground, the wavelength and incident angle of SH wave. Finally, by using the analytical solutions, the effects of the ground material, burial depth of the tunnel, and lining thickness and the slippage effect at the ground-lining interface on the seismic response of tunnels are investigated. The proposed solution could serve as a useful tool for seismic analysis and design of tunnels in layered ground.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1999.04a
• /
• pp.195-202
• /
• 1999

In this Paper, a so-called volume-control method for nonlinear failure analysis of reinforced concrete cylindrical structures is proposed. The pressure node which defines uniform change of pressure on finite element is added into layered shell element utilizing in-plane constitutive models of reinforced concrete and layered formulation. With the pressure node formulation, one can control the change in volume enclosed by the cylindrical structures and determine the required change in pressure. An algorith of volume-control method is employed and failure analyses for RC cylindrical structures are carried out using proposed method.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.7
• /
• pp.1995-2000
• /
• 2013

Layered $Li_{1.2}(Fe_{0.16}Mn_{0.32}Ni_{0.32})O_2$ was prepared by the mixed hydroxide method at various temperatures. Xray diffraction (XRD) pattern shows that this material has a ${\alpha}-NaFeO_2$ layered structure with $R{\bar{3}}m$ space group and that cation mixing is reduced with increasing synthesis temperature. Scanning electron microscopy (SEM) reveals that nano-sized $Li_{1.2}(Fe_{0.16}Mn_{0.32}Ni_{0.32})O_2$ powder has uniform particle size distribution. X-ray absorption near edge structure (XANES) analysis is used to study the local electronic structure changes around the Mn, Fe, and Ni atoms in this material. The sample prepared at $700^{\circ}C$ delivers the highest discharge capacity of 207 $mAhg^{-1}$ between 2-4.5 V at 0.1 $mAcm^{-2}$ with good capacity retention of 80% after 20 cycles.