• Korean Journal of Heritage: History & Science
• /
• v.53 no.2
• /
• pp.4-23
• /
• 2020

The purpose of this study was to explore the diversity of Korea's iron casting technology and to examine various casting methods. The study involved a literature review, analysis of artifacts, local investigation of production tools and technology, and scientific analysis of casting and cast materials. Bellows technology, or Bulmi technology, is a form of iron casting technology that uses bellows to melt cast iron before the molten iron is poured into a clay cast. This technology, handed down only in Jeju Island, relies on use of a clay cast instead of the sand cast that is more common in mainland Korea. Casting methods for cast iron pots can be broadly divided into two: sand mold casting and porcelain casting. The former uses a sand cast made from mixing seokbire (clay mixed with soft stones), sand and clay, while the latter uses a clay cast, formed by mixing clay with rice straw and reed. The five steps in the sand mold casting method for iron pot are cast making, filling, melting iron into molten iron, pouring the molten iron into the cast mold, and refining the final product. The six steps in the porcelain clay casting method are cast making, cast firing, spreading jilmeok, melting iron into molten iron, pouring the molten iron, and refining the final product. The two casting methods differ in terms of materials, cast firing, and spreading of jilmeok. This study provided insight into Korea's unique iron casting technology by examining the scientific principles behind the materials and tools used in each stage of iron pot casting: collecting and kneading mud, producing a cast, biscuit firing, hwajeokmosal (building sand on the heated cast) and spreading jilmeok, drying and biyaljil (spreading jilmeok evenly on the cast), hapjang (combining two half-sized casts to make one complete cast), producing a smelting furnace, roasting twice, smelting, pouring molten iron into a cast, and refining the final product. Scientific analysis of the final product and materials involved in porcelain clay casting showed that the main components were mud and sand (SiO₂, Al₂O₃, and Fe₂O₃). The release agent was found to be graphite, containing SiO₂, Al₂O₃, Fe₂O₃, and K₂O. The completed cast iron pot had the structure of white cast iron, comprised of cementite (Fe₃C) and pearlite (a layered structure of ferrite and cementite).

• Journal of Animal Environmental Science
• /
• v.16 no.2
• /
• pp.153-160
• /
• 2010

Recently, the treatment of dead poultry has become more important issue because, the infected poultry, which was buried under the ground, causes environmental contaminations such as steep water and reek occurrence, etc. Therefore, in this study, we investigated the type of treatment and the composting methods influencing to the characteristics on decomposition and fermentative disinfection of dead poultry with poultry manure and sawdust. The results of the port tests showed that amputated poultry treated by the cut-sterilization were not only more decomposed, with less smell compared to the non-treated poultry carcass. When we treated thermophilic microorganism such as bacillus in this amputated poultry, the temperature of treated poultry increased much fester, the fermentation temperature didn't rise and not maintained constantly for long time due to the small size of the fermentation port. On the other hand, we did fermentation test by the layered disposal method with more poultry. In this experiment, the temperature of fermented poultry rose to $54^{\circ}C$ in a day and maintained around $55^{\circ}C$ during four weeks period. With less odor outside the experiment room. further. Also, we inoculated AI virus, ND virus in the excrement for studying the effect of fermentative disinfection. The result of the test revealed that AI virus was destructed within 60 minutes and ND virus was destructed within 30 minutes at the temperature of $56^{\circ}C$. Therefore, the investigations revealed scope of composting method for steam sterilized infected poultry in the originated area mixed with poultry manure, sawdust by thermophilic microorganism could increase the effectiveness of fermentative disinfection and decrease the environmental contamination.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.292-292
• /
• 2016

Transition metal dichalcogenides (TMDs) with a two-dimensional layered structure have been considered highly promising materials for next-generation flexible, wearable, stretchable and transparent devices due to their unique physical, electrical and optical properties. Recent studies on TMD devices have focused on developing a suitable doping technique because precise control of the threshold voltage ($V_{TH}$) and the number of tightly-bound trions are required to achieve high performance electronic and optoelectronic devices, respectively. In particular, it is critical to develop an ultra-low level doping technique for the proper design and optimization of TMD-based devices because high level doping (about $10^{12}cm^{-2}$) causes TMD to act as a near-metallic layer. However, it is difficult to apply an ion implantation technique to TMD materials due to crystal damage that occurs during the implantation process. Although safe doping techniques have recently been developed, most of the previous TMD doping techniques presented very high doping levels of ${\sim}10^{12}cm^{-2}$. Recently, low-level n- and p-doping of TMD materials was achieved using cesium carbonate ($Cs_2CO_3$), octadecyltrichlorosilane (OTS), and M-DNA, but further studies are needed to reduce the doping level down to an intrinsic level. Here, we propose a novel DNA-based doping method on $MoS_2$ and $WSe_2$ films, which enables ultra-low n- and p-doping control and allows for proper adjustments in device performance. This is achieved by selecting and/or combining different types of divalent metal and trivalent lanthanide (Ln) ions on DNA nanostructures. The available n-doping range (${\Delta}n$) on the $MoS_2$ by Ln-DNA (DNA functionalized by trivalent Ln ions) is between $6{\times}10^9cm^{-2}$ and $2.6{\times}10^{10}cm^{-2}$, which is even lower than that provided by pristine DNA (${\sim}6.4{\times}10^{10}cm^{-2}$). The p-doping change (${\Delta}p$) on $WSe_2$ by Ln-DNA is adjusted between $-1.0{\times}10^{10}cm^{-2}$ and $-2.4{\times}10^{10}cm^{-2}$. In the case of Co-DNA (DNA functionalized by both divalent metal and trivalent Ln ions) doping where $Eu^{3+}$ or $Gd^{3+}$ ions were incorporated, a light p-doping phenomenon is observed on $MoS_2$ and $WSe_2$ (respectively, negative ${\Delta}n$ below $-9{\times}10^9cm^{-2}$ and positive ${\Delta}p$ above $1.4{\times}10^{10}cm^{-2}$) because the added $Cu^{2+}$ ions probably reduce the strength of negative charges in Ln-DNA. However, a light n-doping phenomenon (positive ${\Delta}n$ above $10^{10}cm^{-2}$ and negative ${\Delta}p$ below $-1.1{\times}10^{10}cm^{-2}$) occurs in the TMD devices doped by Co-DNA with $Tb^{3+}$ or $Er^{3+}$ ions. A significant (factor of ~5) increase in field-effect mobility is also observed on the $MoS_2$ and $WSe_2$ devices, which are, respectively, doped by $Tb^{3+}$-based Co-DNA (n-doping) and $Gd^{3+}$-based Co-DNA (p-doping), due to the reduction of effective electron and hole barrier heights after the doping. In terms of optoelectronic device performance (photoresponsivity and detectivity), the $Tb^{3+}$ or $Er^{3+}$-Co-DNA (n-doping) and the $Eu^{3+}$ or $Gd^{3+}$-Co-DNA (p-doping) improve the $MoS_2$ and $WSe_2$ photodetectors, respectively.

• Journal of the Mineralogical Society of Korea
• /
• v.31 no.1
• /
• pp.47-55
• /
• 2018

Talc, hydrous magnesium phyllosilicate, is one of the most popular industrial minerals due to their chemical stability and adsorptivity. While micro-sized talc has long been used as a filler and coating, nano-sized talc recently is attracting attention as additives for improving the stability of nanocomposites. In this study, we produced the nano-sized talc powder by mechanical method using high energy ball mill and investigated the changes in particle size and crystallinity with increasing milling time up to 720 minutes. X-ray diffraction results show that the peak width of talc gradually as the milling proceeded, and after 720 minutes of pulverization, the talc showed an amorphous-like X-ray diffraction pattern. Lase diffraction particle size analysis presents that particle size of talc which was ${\sim}12{\mu}m$ decreased to ${\sim}0.45{\mu}m$ as the milling progressed, but no significant reduction of particle size was observed even after grinding for 120 minutes or more. BET specific surface area, however, steadily increases up to the milling time of 720 minutes, indicating that the particle size and morphology change steadily as the milling progressed. Scanning electron microscope and transmission electron microscope images shows that layered particles of about 100 to 300 nm was aggregated as micro-sized particles after pulverization for 720 minutes. As the grinding time increases, the particle size and morphology of talc continuously change, but the nano-sized talc particles form micro sized agglomerates. These results suggest that there is a critical size along the a, b axes in which the size of plates is reduced even though the grinding proceeds, and the reduction of plate thickness along the c axis leads the increase in specific surface area with further grinding. This study could enhance the understanding of the mechanism of the formation of nano-sized talc by mechanical grinding.

• Restorative Dentistry and Endodontics
• /
• v.27 no.5
• /
• pp.463-472
• /
• 2002

Bacterial lipopolysaccharide (LPS) plays a major role in stimulating the synthesis and release of the principal osteoclast-activating cytokines, namely, interleukin 1 and tumor necrosis factor-$\alpha$ from immune cells. Although rnonocytes/macrophages are the main producers of these cytokines, recent evidence has indicated that polymorphonuclear leukocytes (PMN) have the ability to release IL-1 and TNF-$\alpha$. Calcium hydroxide has been shown to be an effective medicament in root canal infections, reducing the microbial titre within the canal. It has been proposed that the therapeutic effect of Ca(OH)$_2$ may also be the result of direct inactivation of LPS. The purpose of this study was to investigate whether treatment of Porphyromonas endodontalis LPS with calcium hydroxide alters its biological action as measured by human PMN secretion of IL-1 and TNF-$\alpha$, and it was compared with Escherichia coli LPS. P. endodontalis ATCC 35406 was cultured in anaerobic condition, and LPS was extracted using the hot-phenol water extraction method and purified. Purchased E. coli LPS was also purified. 100 $\mu\textrm{g}$/ml of each LPS in pyrogen free water were incubated with 25mg/ml Ca(OH)$_2$ at 37$^{\circ}C$ for 7 days. The supernatants were subjected to ultrafiltration, and the isolates were lyophilized and weighed. PMNs were obtained from peripheral blood by centrifugation layered over Lymphoprep. The cells were resuspended (4$\times$10$^6$ cells/ml) in RPMI 1640 followed by treatment with various concentrations of LPS (0, 0.1, 1, 10$\mu\textrm{g}$/ml) for 24 hours at 37$^{\circ}C$ in 5% $CO_2$ incubator. The supernatants of cells were collected and the levels of IL-1$\alpha$, IL=1$\beta$ and TNF-$\alpha$ were measured by enzyme-linked immunosorbent assay. The results were as follows ; 1. The levels of IL-1$\alpha$, IL-1$\beta$, TNF-$\alpha$ from PMN treated with each LPS were significantly higher than those released from unstimulated PMN of the control group (p<0.05). 2. The levels of all three cytokines released from PMN stimulated with each calcium hydroxide treated LPS were significantly lower than those released from PMN stimulated with each untreated LPS (p<0.05), while they were not significantly different from those released from unstimulated PMN of the control group (p>0.05) 3. The levels of secretion for all three cytokines were affected in a dose-dependent manner in PMN stimulated with each LPS (p<0.05), but not in PMN stimulated with each calcium hydroxide treated LPS (p>0.05). 4. The levels of all three cytokines released from PMN stimulated with p. endodontalis LPS were significantly lower than those released from PMN stimulated with E coli LPS (p<0.05).

• Journal of the Korean Electrochemical Society
• /
• v.17 no.4
• /
• pp.222-228
• /
• 2014

Ni-rich system $Li[Ni_{1-x-y}Co_xMn_y]O_2$ of lithium secondary battery cathode material keep a high discharge capacity. However, by the Ni content increases, there is a problem that the electrochemical properties and stability of the structure are reduced. In order to solve these problems, research for positive ion doping is performed. The one of the cathode material, barium-doped $Li[Ni_{0.6-x}Ba_xCo_{0.1}Mn_{0.3}]O_2$ (x=0.01), was synthesized by the precursor, $Ni_{0.6}Co_{0.1}Mn_{0.3}(OH)_2$, from the co-precipitation method. The barium doped materials have studied the structural and electrochemical properties. The analysis of structural properties, results of X-ray diffraction analysis, and those results confirmed the change of the lattice from the binding energy in the structure by barium doping. Increased stability of the layered structure was observed by $I_{(006)}+I_{(102)}/I_{(101)}$(R-factor) ratio decrease. we expected that the electrochemical characteristics are improved. 23 mAh/g discharge capacity of barium-doped $Li[Ni_{0.6-x}Ba_xCo_{0.1}Mn_{0.3}]O_2$ (x=0.01) electrode is higher than discharge capacity of $Li[Ni_{0.6}Co_{0.1}Mn_{0.3}]O_2$ due to decrease overvoltage. And, through the structural stability was confirmed that improved the cycle characteristics. We caused a reduction in charge transfer resistance between the electrolyte and the electrode was confirmed that the C-rate characteristics are improved.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.1
• /
• pp.190-211
• /
• 2019

In March 2015, The Agency for Cultural Affairs of Japan implemented a project called "Japan Heritage," which aims to promote the unique narratives of cultural properties of the region by branding the locality for revitalization in preparation for the 2020 Tokyo Olympics and Paralympics. This bottom-up approach of cultural policy has been called a "Cool Japan Strategy of Cultural Heritage" in the 21st century, which effectively incorporates local cultural heritage and tourism. However, although a total of 67 Japan Heritage projects have been designated as of December 2018, almost none has been introduced in the academic forum in Korea. On the basis of this background and a lack of academic awareness in Korea on Japan's recent cultural policies, this research aims to focus on the three cases of Gunma Prefecture implemented in local, global, and glocal aspects. To specify, the cases are the "Gunma Silk Heritage" project, implemented in 2011, the "Tomioka Silk Mill and Related Sites" project that was included on the UNESCO World Heritage List in 2014, and "The Best Wife in the World - Silk Story of Gunma," case certified as the first project of "Japan Heritage" launched in 2015. Based on the questionnaire method conducted with the World Heritage Registration Promotion Division in Gunma Prefectural Government, as well as a literature view, the research revealed that the consecutive implementation of a series of cultural heritage projects in Gunma is not coincidental, but rather a strategy aiming to create a synergism where each project complements the others. Moreover, this paper demonstrates that Gunma Prefecture has been utilizing the local silk industry as a tangible and intangible cultural resource in multi-layered heritage projects, resulting in a "spiral synergy effect" and a "chain of the recognition process." In conclusion, it illustrates the recent trend of utilizing cultural heritage in the context of the Cool Japan strategy, which seeks to move away from the administration of maintaining the status quo cultural heritage protection to a proactive one with greater potential growth. This research may thus provide meaningful insight into the utilization of domestic historical and cultural resources as well as related policy-making, in that it will ultimately promote the chain effect of linking the multiple heritage policies and projects at the local, global, and glocal levels.

• Journal of vocational education research
• /
• v.37 no.3
• /
• pp.85-111
• /
• 2018

The purpose of this study is to derive the competence of nursing teacher in Specialized vocational high school. The knowledge, skills, and attitudes required for the nursing teachers were verified and the competency groups and sub-competencies were verified and priorities were suggested. To do this, 23 nursing teachers who were currently working in the Specialized vocational high school were selected as expert panels and the study was conducted using Delphi and Layered Analysis(AHP) technique. The results of this study were as follows. First, the competency group of the nursing teacher in Specialized vocational high school showed teaching and learning methods & techniques, student guidance, curriculum development and operation, school management support, industry-academy cooperation, self-development and professionalism improvement. The total number was 6. Second, the sub-competency is composed of knowledge and skills related to the curriculum, planning and preparation of instruction, instruction operation, guidance of experiment and practice, instruction evaluation, development and utilization of teaching and learning medium, instruction environment, guidance on student education activities outside the curriculum, career guidance, life guidance, class management, guidance of technology and qualification, development of school curriculum, organization and operation of school curriculum, planning and operation of field practice, work planning, school management support, teacher evaluation and personnel management support, leaning support(practice place and equipment), establishment and operation of industry-academia cooperation, strengthening community cooperation, public relations in the school(department), field research for improvement of educational activities, participation in conferences and training, exploration of new knowledge and technology, The total number was 26. The most important of the relative importance was the curriculum development and operation. The subordinate competencies that have a high priority in each competency group were guidance of experiment and practice, guidance of technology and qualification, planning and operation of field practice, leaning support(practice place and equipment), management and work planning, establishment and operation of industry-academia cooperation, exploration of new knowledge and technology. The competency system derived from this study will be applied to the training and evaluation of nursing teachers in the future and can be used as basic data for related research.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.4
• /
• pp.336-359
• /
• 2021

In this study, hybrid CLT research and development trends were analyzed to improve the low rolling shear strength of CLT, a large wooden panel used in high-rise wooden buildings. Through this, basic data that can be used in research and development directions for localization of CLT were prepared. As a way to improve the low rolling shear strength, the use of hardwood lamina, the change of the lamina arrangement angle, and the use of structural composite materials are mainly used. Rolling shear strength and shear modulus of hardwood lamina are more than twice as high as softwood lamina. It confirmed that hardwoods can be used and unused species can be used. Rolling shear strength 1.5 times, shear modulus 8.3 times, bending stiffness 4.1 times improved according to the change of the layer arrangement angle, and the CLT strength was confirmed by reducing the layer arrangement angle. Structural wood-based materials have been improved by up to 1.35 times MOR, 1.5 times MOE, and 1.59 times rolling shear strength when used as laminas. Block shear strength between the layer materials was also secured by 7.0 N/mm², which is the standard for block shear strength. Through the results of previous studies, it was confirmed that the strength performance was improved when a structural wood based materials having a flexural performance of MOE 7.0 GPa and MOR 40.0 MPa or more was used. This was determined based on the strength of layered materials in structural wood-based materials. The optimal method for improving rolling shear strength is judged to be the most advantageous application of structural wood based materials with strength values according to existing specifications. However, additional research is needed on the orientation of CLT lamina arrangement according to the fiber arrangement of structural wood-based materials, and the block shear strength between lamina materials.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.7
• /
• pp.49-62
• /
• 2022

The hollow modular concrete block reinforced foundation method is one of the ground reinforcement foundation methods that uses hexagonal honeycomb-shaped concrete blocks with mixed crushed rock to reinforce soft grounds. It then forms an artificial layered ground that increases bearing capacity and reduces settlement. The hollow modular honeycomb-shaped concrete block is a geometrically economical, stable structure that distributes forces in a balanced way. However, the behavioral characteristics of hollow modular concrete block reinforced foundations are not yet fully understood. In this study, a bearing capacity test is performed to analyze the reinforcement effectiveness of the hollow modular concrete block through the laboratory model tests. From the load-settlement curve, punching shear failure occurs under the unfilled sand condition (A-1-N). However, the filled sand condition (A-1-F) shows a linear curve without yielding, confirming the reinforcement effect is three times higher than that of unreinforced ground. The bearing capacity equation is proposed for the parts that have contact pressure under concrete, vertical stress of hollow blocks, and the inner skin friction force from horizontal stress by confining effect based on the schematic diagram of confining effect inside a hollow modular concrete block. As a result of calculating the bearing capacity, the percentage of load distribution for contact force on the area of concrete is about 65%, vertical force on the area of hollow is 16.5% and inner skin friction force of area of the inner wall is about 18.5%. When the surcharge load is applied to the concrete part, the vertical stress occurs on the area of the hollow part by confining effect first. Then, in the filled sand in the hollow where the horizontal direction is constrained, the inner skin friction force occurs by the horizontal stress on the inner wall of the hollow modular concrete block. The inner skin friction force suppresses the punching of the concrete part and reduces contact pressure.