• 공학논문집
• /
• 제4권1호
• /
• pp.125-135
• /
• 2002

변동수압에 의한 해저 포화 사질층의 연직 간극수압 분포를 이론 및 실험적으로 연구하였다. 실험에 의해 모래표면에 작용하는 수압은 모래층으로 전달되며 진폭이 감쇠하고 상이 지연되며, 유효응력이 0이 되는 액상화 현상이 특별 조건에서 발생한다. 이러한 실험결과는 탄성 대수층에 대한 지하수문제와 같은 이론으로 잘 설명된다. 해석에 의한 액상화의 주요 특징은 다음과 같다: 1) 액상화 심도는 진폭 및 변동수압의 주파수 증가에 따라 증가한다. 2) 수량을 증가시키고 모래층 내의 공기가 많아짐에 따라 액상화 심도가 증가한다. 특히, 공기의 적은 양도 액상화에 크게 영향을 미친다. 3) 압축율이 증가함에 따라 액상화 심도는 감소한다. 4) 투수 계수값이 어느 특정값 이상이 되면 투수계수값이 증가함에 따라 액상화 심도가 감소한다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제16회 학술발표회 논문개요집
• /
• pp.182-182
• /
• 1999

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.43-46
• /
• 1988

In this paper, a methodology for determination of the thickness of layer on a substrate using reflection acoustic microscope has been presented. It has been shown that the amplitude and the phase of reflection coefficient of the layer-substrate composite has been used for measurement of layer thickness, acoustic velosity, mass density of the layer material. The reflection acoustic microscope operating at a frequency of 15 MHz has been used for the experiment and the measured acoustic impedance value for aluminum sample has agreed with the published data, and the measured layer thickness for silver-glass composite has agreed with that measured using micrometer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.357-360
• /
• 1996

MgO protection layer in ac PDP(plasma display panel) prevents the dielectric layer from ion bombarding in discharge plasma. The MgO layer also has the additional important role in lowering the firing voltage due to a large secondary electron emission coefficient. Until now, the MgO protection layer is mainly prepared by E-beam evaporation. In this study, MgO protection layer is prepared on dielectric layer of ac PDP cell by reactive R.F magnetron sputtering with Mg target under various conditions of oxygen partial pressure. Discharge characteristics of PDP is also studied as a parameter of MgO preparation conditions. The sputtered MgO shows the better discharge characteristics compared with MgO deposited by E-beam evaporator.

• 한국진공학회지
• /
• 제7권1호
• /
• pp.59-65
• /
• 1998

13.56MHz를 사용하는 r.f.PACVD(Plasma assisted chemical vapor deposition)방법 으로 다층 다이아몬드상 카본(DLC)필름을 Si wafer기판 위에 합성하였다. 다층 DLC필름은 2.5$\mu$m두께의 순수한 DLC필름과 0.2$\mu$m두께의 Si이 함유된 Si-DLC필름으로 구성되었으 며, ball on disk type의 tribometer를 이용하여 대기 중에서 다층 DLC필름의 마모거동을 고 찰하였다. 표면층으로 합성된 Si-DLC필름내의 Si함량이 증가함에 따라 다층 DLC필름과 AISI52100 steel ball 사이에 0.1 이하의 낮은 마찰계수를 유지하는 기간이 증가하였다. 44,000cycle과 158,400cycle의 마모실험 후 측정된 다층 DLC필름의 마모율은 각각 $2.5\times10^{-8}\sim1.8\times10^{-7}\textrm{mm}^3$/rev.과 $7.1\times10^{-9}\sim1.8\times10^{-8}\textrm{mm}^3$/rev.로 나타났다. 158,400cycle의 마모실험 후 측정된 마모율은 내마모 특성이 우수한 DLC필름보다도 2배 정도 우수한 것으로 나타났 다. 마모시험에 의해 형성된 debris의 조성을 분석한 결과, 이런 낮은 마찰계수와 우수한 내 마모 특성은 steel ball의 wear 표면을 덮고 있는 Si oxide debris층의 형성에 따른 결과로 판단되었다. 또한, 이러한 steel ball의 wear scar표면에 형성된 debris층을 제거하여도, 새로 운 Si oxide debris층이 wear scar표면에 다시 생성되어 낮은 마찰계수를 유지하고 있었다.

• 대기
• /
• 제34권3호
• /
• pp.283-304
• /
• 2024

This study analyzed the variability and correlation between ground-level air pollutant concentrations and the atmospheric mixing layer height using data from four types of air pollutants (PM_2.5, PM₁₀, NO₂, and O₃) collected at AirKorea monitoring stations nationwide over a five-year period (2018~2022), and aerosol backscatter data observed by the Vaisala CL31 to derive atmospheric mixing layer heights. The five-year trends and variability of ground-level air pollutant concentrations under seasonal and hourly conditions were examined, as well as the seasonal distribution and diurnal variation of the atmospheric mixing layer height. Five correlation coefficient methodologies were applied to analyze the correlations between ground-level air pollutants and atmospheric mixing layer height under various seasonal and hourly conditions, confirming the dilution effect of the atmospheric mixing layer height. The results showed that PM_2.5, PM₁₀, and NO₂ generally had negative correlations with the atmospheric mixing layer height, while O₃ showed a strong positive correlation up to an altitude of 1,200~1,500 meters, and a negative correlation beyond that altitude. It was also shown that a single high concentration event (e.g., PM₁₀) can alter the overall correlation. The correlation can also vary depending on the characteristics of the correlation coefficient methodology, highlighting the importance of applying the appropriate methodology for each case during the analysis process.

• 한국방사선학회논문지
• /
• 제9권6호
• /
• pp.375-379
• /
• 2015

이 연구의 목적은 다종에너지 X선 빔의 유효에너지를 결정하는데 있다. 80 kVp X선 빔에 대한 알루미늄의 반가층은 광자극형광나노닷선량계들(OSLnDs)을 사용하여 측정하였다. 선감쇠계수(${\mu}$)는 측정된 반가층을 사용하여 계산하였다. 그리고 질량감쇠계수(${\mu}/{\rho}$)는 알루미늄의 밀도로 선감쇠계수를 나누어 얻었다. 얻어진 질량감쇠계수의 유효에너지($E_{eff}$)는 미국표준기술연구소(NIST)에서 주어진 알루미늄의 광자에너지들에 대한 X선질량감쇠계수들의 자료를 사용하여 결정하였다. 결과로서, 반가층, 선감쇠계수 및 질량감쇠계수는 각각 2.262 mmAl, $3.06cm^{-1}$, $1.114cm^2/g$이다. 그리고 유효에너지는 29.79 keV에서 결정되었다.

• Applied Science and Convergence Technology
• /
• 제24권6호
• /
• pp.232-236
• /
• 2015

The electro-optical characteristics of several functional layers over the MgO protective layer were studied during the continuous discharge of an AC-PDP. In order to observe the degradation of each functional layer on the MgO protection layer, we measured the surface morphology, cathodoluminescence (CL) spectrum, the secondary electron emission coefficient (${\gamma}$) and the discharge characteristics after 500 hours of discharge during the operation of the AC-PDP.

• 대한기계학회논문집
• /
• 제19권1호
• /
• pp.240-250
• /
• 1995

A CPM (computational preston tube method) was developed to measure wall shear stress in a transitional boundary layer on a flat plate using Preston tubes. Correlation for the displacement factor of Preston tubes was improved for a CPM to be used in the transitional boundary layer. The distribution of skin-friction coefficient was reasonably predicted in the uniform free stream of 3.1% turbulence intensity. Reasonable and accurate estimation of displacement factor of Preston tubes was found to be of crucial importance for the CPM, especially in the laminar boundary layer. The mean velocity profiles of the boundary layer on the plate were also measured and presented.

• 대한기계학회논문집A
• /
• 제28권11호
• /
• pp.1727-1732
• /
• 2004

A nickel layer was deposited onto the PZT thin films, serving both as a selective radiation absorption layer and as a top electrode. The absorption properties of such nickel coated multi-layered infrared detectors were studied in the visible and infrared wavelength ranges. The optimal thickness of the nickel layer on our substrate was 10nm. The maximum absorption coefficient of the deposited 10nm thick nickel layer was 0.7 at a 632nm wavelength. However, a striking asymmetric polarization hysteresis loop was observed in these PZT thin films with nickel as the top electrode. This asymmetric polarization was attributed to the difference between the dynamic pyroelectric responses in these Ni/PZT/Pt films poled either positively or negatively before the measurement. A positively poled film showed a 40% higher voltage response than a negatively poled detector.