• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.3
• /
• pp.190-193
• /
• 2010

Various power semiconductor devices have been developed and evolved since 1950s. Among them, IGBT is the most developed power semiconductor device which has high breakdown voltage, high current conduction and suitable switching speed which perform trade-offs between each other. In other words, there are trade-offs between a breakdown voltage and on-state voltage drop, and between on-state voltage drop and turn-off time. In this paper, the new structure is proposed to improve a trade-off between a breakdown voltage and on-state voltage drop. The proposed structure has a trench collector and this trench collector induces an accumulation layer at the bottom of an n-drift region during off-state. And this accumulation layer prevents expansion of depletion layer so that trapezoidal electric field distribution is performed in the n-drift region. As a result of this, breakdown voltage is increased without increasing on-state voltage drop. The electrical characteristics of the proposed IGBT is analyzed and optimized by using representative device simulator, TSUPREM4 and MEDICI. After optimization, the electrical characteristics of the proposed IGBT is compared with NPT IGBT which have the same device thickness. As a result of this, it can be confirmed that the proposed structure increases the breakdown voltage of 800 V than that of the conventional NPT IGBT without increasing the on-state voltage drop.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.764-767
• /
• 2001

Because using LB method, result that produce Arachidic acid and Stearic acid LB film and measure the accumulation characteristic and electrical characteristic is as following. Organic monolayers of surface of the water compression each 9 layer's LB film to slide glass and manufactured MIM device compressing molecular film only. Could confirm that accumulation was good seeing as absorption coefficient and SEM picture, AFM picture that prevent manufactured LB films. Formation of domain of coexistence form that prevent LB film is indefinite and distinction of border side was not clear, and could know that roughness appears greatly. Obtained current by applied voltage could know that is proportional almost, though Arachidic acid appeared as bulk of current that happen in equaler certification voltage than Stearic acid is less, this alkyl chain longer Arachidic acid that serving relations special quality is superior know can .

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1633-1635
• /
• 1996

This phenomena of streaming-electrification is generated between solid and liquid boundary called electric double-layer which is generated by potential difference. A charge separation at interfaces between a moving fluid and a solid boundary can give rise to the generation of substantial electric field and at last these can give rise ta insulating failure. Therefore injection of the adverse-charge in streaming-electrified insulating oil to eliminate the accumulation charge and its related phenomena was investigated.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.1 no.2
• /
• pp.134-143
• /
• 1993

The trajectory planning for the manipulator installed on "the automatic pothole repair vehicle" is discussed and the final surface of the patched pot hole is simulated in this work. The relationship between the accumulation data of the mixture with and without the movement of the manipulator is identified to utilize the latter data for the calculation of the former one. Based on this relationship, the method to calculate the accumulation of the mixture when the manipulator changes the speed and the direction is also introduced. The trajectory is determined to make the final surface smooth under the condition that the pothole is cut to hexahedron before patching and only the spacing and the shifting of the manipulator is controllable. Final surface is simulated by the computer to prove the adequacy of the determined trajectory.

• Journal of Forest and Environmental Science
• /
• v.11 no.1
• /
• pp.72-80
• /
• 1995

Altitudinal effects on the accumulation of O layer were examined for deciduous broad-leaved forests in the experimental forest of Kangwon National University. There found a marked increased towards the higher altitudes in the thickness of O layer. These trends could be observed conspicuously on the F2 and H layers. The relation between thickness (X, cm) and dry weight (Y, $kg/m^2$) of O layer was approximated by linear regression equations;Y($kg/m^2$ = aX(cm). The values of coefficient "a" for the F2, H and F2+H layers were 0.43, 0.61 and 0.53, respectively. Bulk densities of the accumulated organic matter estimated nearly to be $45g/dm^2$ in F2 layer, $60g/dm^2$ in H layer and $55g/dm^2$ in F2+H layer. The amount of O layer ranged from 13ton/ha for the forest at 280m in altitude to 41ton/ha for the upper forest at 710m in altitude. Among these total amount of the O layer, F1, F2 and H layer occupied to be 5~10ton/ha, 5~11ton/ha and 13~40ton/ha, respectively.

• Journal of the Korean institute of surface engineering
• /
• v.30 no.4
• /
• pp.272-280
• /
• 1997

The Thermal Barrier Coation(TBC) to improve the that barrier and wear resistant propenrty in high temperature ofthe aircraftength between the accumlation of the aircraft engine and the automobile engine has usually the two layer structure. One is a creamic top layer for heat insulation and the other is a metal bond layer to facilitate the bond strength between the top ceramic layer and the substrate. But, the coated layers should be peeled off because of the accumulation of the thermal stress by the differance of the thermal expantion coefficient between metal and ceramics in a hrat cyclic environment. In this study, the intermediate layer by plasm spray process was introduced to reduce the thermal stress. The powders of plasm spray coating were the Yttria Stabilized Zirconia (YSZ), the Magnesia Stabillized Zirconia(MSZ) and NiCrAlY. the intermediate layer was sprayed with the powders of the bond cast for the purpose of test were executed. The high temperature wear resistance tends to decreasnceee wear and thermal shock test were exeucuted. The high temperature were resistance of the YSZ TBC is better that of the MSZ TBC. The wearrsistance tends to decrease accoring to incresing the temperature between $400^{\circ}C$to $600^{\circ}C$. The thermal shock life of the 3 layer TBC with YSZ top casting was the most outstanding thermal shock rsisstasnce. This means that the intermediate layer should play an importnat roll to alleviate the diffrerence of the thermal expansion coef frcients between metallic layer and cermics layer.

• Proceedings of the Turfgrass Society of Korea Conference
• /
• 2011.02a
• /
• pp.5-8
• /
• 2011

This research was conducted to determine the effect of capillary rise interruption layer on the sand based growing media when growing Kentucky bluegrass under soil reclamation and saline water irrigation. Rootzone profile consists of three layers as top soil of 30 cm, 20 cm of capillary interruption layer and 10 cm of reclaimed paddy soil. Rootzone profile was packed in column pots. The top soil was a mixture of sand dredged up from Lake Bhunam Tae Ahn, Korea and peat at the ratio of 95:5 by volume. Bottom part of column was covered with plastic net and the pots were soaked into 5 cm depth saline water reservoir with salinity $3-5dsm^{-1}$. Kentucky bluegrass was installed by sod and irrigated using $2dSm^{-1}$ saline water(5.7mm $day^{-1}$)in 3days interval. The results showed that the largest accumulation of salt in the spring with ECe of $5.4dSm^{-1}$ and SAR34.0 in rootzone with out capillary rise interruption layer and ECe of $4.6dSm^{-1}$ and SAR8.24 at rootzone using gravel as capillary rise interruption layer material. Kentucky bluegrass grown in growing media with gravel as capillary rise interruption layer resulted in the average visual quality rate of 8.1and clipping dry weight of $24.8gm^{-2}$, while Kentucky bluegrass grown in the growing media with out capillary rise interruption layer showed the visual quality rate of 7.9 and clipping dry weight of $34g.m^{-2}$. Capillary rise interruption layer of gravel and coarses and enhanced the visual quality by 4.1and 4.0%, root length by 50 and 38%, and root dryweight by 35and 17% of Kentucky bluegrass, and reduced the accumulation of Na by 16% and 25%, ECe by 7% and 13% in the rootzone.

• Applied Biological Chemistry
• /
• v.18 no.3
• /
• pp.123-144
• /
• 1975

This study has been carried out to investigate the translocation-illuviation status of iron and manganese, which are striking phenomena in paddy soils, in relation to its morphological characteristics, and to find out a method to identify illuvial layer of iron quantitatively. Determination of active iron and easily reducible manganese content in surface soils of lowland paddy (266 samples) in Korea were conducted. The examination has been made on relationship between morphological, physico-chemical properties of the representative paddy soils (9 series) and iron and manganese content of their horizons. The results are summarized as follows. 1. The poorer the drainage, the higher concentration of active iron and easily reducible manganese were found, and under same drainage condition, the more the sand, the lower the content of them. 2. Irrespective of soil texture and drainage, highly signignificant positive correlation was found between the contents of active iron ($\hat{Y}$) and clay plus silt in surface soils. $$\hat{Y}=0.3929+(0.05352\;X\;clay%)+(0.0001023\;X\;silt%){\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;I$$ No correlation, however, was found between clay content and easily reducible manganese concentration. 3. Significant positive correlation was obtained between active iron ($\hat{Y}$) and total iron (x) content in each profiles of all soil series. Obtained regression equation is as follows; $$\hat{Y}=0.361x-0.480(r=0.651^{**}){\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;{\ldots}\;II$$ On the other hand, easily reducible manganese concentration had a tendency to increase, not significantly, with increasing total manganese concentration. 4. Accumulation of iron and manganese generally can be found in paddy soils, but distinct accumulation was found under moderately well drained fine loamy and clay soils, while surface accumulation occurred under poor drainage without regard to soil texture. 5. Profile description or determination of active iron in each horizon were found to be insufficient to designate illuvial layer of iron. Therefore, identification of illuvial layer of iron based on the ratio of total iron and active iron, and concentration of active iron estimated by the content of clay plus silt (Equation 1 above) was thought to be reasonable. Also, manganese accumulation layer would be estimated by total manganese and easily reducible manganese content and their ratio.

• Korean Journal of Soil Science and Fertilizer
• /
• v.50 no.6
• /
• pp.634-643
• /
• 2017

No-tillage is an effective practice to save labor input and reduce methane emission from the paddy. Effects of tillage and cultivation methods on carbon accumulation and soil properties were investigated in the treatments of tillage-transplanting (T-T), tillage-wet hill seeding (T-WS), minimum tillage-dry seeding (MT-S) and no-tillage dry seeding (NT-S) of rice. Soil carbon was higher in NT-S and MT-S, compared to T-T and T-WS. In NT-S and MT-S, soil carbon contents were the highest in the top soil (5 cm depth) and decreased with soil depth. In T-T and T-WS, however soil carbon contents showed no significant difference up to soil depth of 15 cm from the top. Carbon content was the highest in the soil particle size under $106{\mu}m$ and decreased as the soil particle size increased. Contents of water-stable aggregates in NT-S and MT-S were higher than those of T-T and T-WS. In NT-S and MT-S, contents of water-stable aggregates were the highest in the top soil and significantly decreased with soil depth while no significant difference up to the soil depth of 15 cm in T-T and T-WS. Available $SiO_2$ contents in the top soil were the highest in NT-S and MT-S while the lowest in T-T and T-WS. It is concluded that minimum or no disturbance of soil in rice cultivation can increase carbon accumulation in the soil, especially in the top layer, and subsequently contribute to the formation of the water-stable soil aggregates.

• Journal of Pharmacopuncture
• /
• v.11 no.2
• /
• pp.33-40
• /
• 2008

Objective The purpose of this study was to investigate the effects of Sweet Bee Venom to the abdominal fat accumulation clinically. Methods The 20 healthy women volunteers who showed the notice of this study by the home page of Sangji University were treated with Sweet Bee Venom(SBV) during twenty times. To investigate the effects of Sweet Bee Venom of the abdominal fat accumulation, abdominal CT, LFT, Thermography, BMI, Inbody 3.0 etc. were performed during clinical trials. And statistical analysis was carried out the data of 10 volunteers who performed all the schedule of this study. Results Following results were obtained from the clinical studies Sweet Bee Venom showed the effect of decreased the body weight, thickness of abdominal skin and fat layer, BMI, and increased abdominal heat, but they are not showed statistical significant. Conclusions These results suggest that treatment Sweet Bee Venom on the abdomen was effective to decrease fat tissue but for the treatment of obesity was performed with right diet program and exercise.