• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2006년도 학술발표회 논문집
• /
• pp.1313-1317
• /
• 2006

In this study, various hydraulic phenomena were analyzed from the dam model experiments and the analyzed results were compared with existing computation results. Sungduk dam model structures were constructed using Froude similarity law by 1:50 scale. From the measurements of hydraulic phenomena at spillway channel, an improvement method was trying to be suggested over shortcoming of existing design plan. The result of model experiment showed no big difference with that of each part's numerical interpretation. Sidewall overflows were observed, as water conveyance occurred due to the linear characteristics of spillways, which raised the necessity for improving the linear forms of spillways. Also, it was judged to be necessary improving load pressure and establishing protective structures at the riverbed grounds of downstream channels.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1487-1490
• /
• 2002

In this paper, a design methodology of fuzzy sliding mode control scheme for a hydraulic elevator controlled by inverter is presented. The proposed scheme uses a fuzzy sliding mode controller(FSMC), which is designed based on the similarity between the fuzzy logic control(FLC) and the sliding mode control(SMC). The proposed method has advantages that the stability and the robustness of the FLC are proved and ensured by the sliding mode control law, and the computation burden could be reduced greatly. The validity and the effectiveness of the proposed control method have been shown through the real world industrial application results.

• 음성과학
• /
• 제11권4호
• /
• pp.233-247
• /
• 2004

This study explores sound alternations in a consonant cluster in which at least one consonant is a sonorant (a son/C cluster, hereafter). In this study, I argue that phonological processes affecting son/C clusters result from low perceptual salience rather than from the Syllable Contact Law as discussed in Vennemann (1988), Clements (1990), Rice & Avery (1991), Baertsch & Davis (2000), among others. That is, as a main factor motivating the alternations in the cluster, I consider contrasts of weak perceptibility triggered by phonetic similarity between two members of a cluster (Kawasaki 1982, Ohala 1992, 1993). Based on the findings from a typological survey in 31 different languages, I show that a speech perception-based account makes a correct prediction regarding the patterning of sonorant/sonorant sequences and that of obstruent/sonorant sequences, while the syllable contact account does not.

• Structural Engineering and Mechanics
• /
• 제14권3호
• /
• pp.345-364
• /
• 2002

The scaling laws for vibration response of anti-symmetrically laminated plates are derived by applying the similitude transformation to the governing differential equations directly. With this approach, a closed-form solution of the governing equations is not required. This is a significant advantage over the method employed by other researchers where similitude transformation is applied to the closed-form solution. The scaling laws are tested by comparing the similitude fundamental frequencies to the theoretical fundamental frequencies determined from the available closed-form solutions. In case of complete similitude, similitude solutions from the scaling laws exactly agree with the theoretical solutions. Sometimes, it may not be feasible to select the model which obeys the similarity requirement completely, therefore partial similitude is theoretically investigated and approximate scaling laws are recommended. The distorted models in stacking sequences and laminated material properties demonstrate reasonable accuracy. On the contrary, a model with distortion in fiber angle is not recommended. The derived scaling laws are very useful to determine the vibration response of complex prototypes by performing the experiment on a model with required similarities.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.116-121
• /
• 2002

Axial fans are widely used in heavy machines due to their ability to produce high flow rate for cooling of engines. At the same time, the noise generated by these fans causes one of the most serious problems. This work is concerned with the low noise technique of discrete frequency noise. To calculate the unsteady resultant force over the fan blade in an unsymmetric engine room. Time-Marching Free-Wake Method is used. From the calculations of unsteady force on fan blades, noise signal of an engine cooling fan is calculated by using an acoustic similarity law. Noise optimization is obtained from Neural Network which is constructed based on the calculated flow rate and noise spectrum.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.318.2-318
• /
• 2002

Axial fans are widely used in heavy machines due to their ability to produce high flow rate fur cooling of engines. At the same time, the noise generated by these fans causes one of the most serious problems. This work is concerned with the low noise technique of discrete frequency noise. To calculate the unsteady resultant force over the fan blade in an unsymmetric engine room, Time-Marching Free-Wake Method is used. From the calculations of unsteady force on fan blades, noise signal of an engine cooling fan is calculated by using an acoustic similarity law. (omitted)

• 한국유체기계학회 논문집
• /
• 제14권6호
• /
• pp.26-34
• /
• 2011

Waterhammer and slamming phenomena can occur when power is cut off due to reversal flow in pipeline and sudden close of check valve. Therefore analysis of reversal flow time, which means the time of reversal flow in pipeline due to pumping station blackout, is needed to protect facilities from waterhammer economically and efficiently. However systematic study on reversal flow time has not been done yet. So theory of reversal flow time analysis is proposed and verified with experiment using several parameters like pump specific speed, motor pole number, and characteristic curve of pipeline in this study.

• 한국습지학회지
• /
• 제15권1호
• /
• pp.91-103
• /
• 2013

본 연구에서는 자연친화적인 호안 블록의 현장 적용시 충분한 기술적인 검증과 구조적, 수리학적 안정성 검토 등이 제대로 이루어지지 않고 있는 문제점을 개선하기 위해 생태적 기능을 확보할 수 있는 식생강화를 위한 다공성 소일 블록에 대하여 수리적 거동 변화에 따른 수리학적 안정성을 검토하였다. 대상구간을 선정하여 수치해석 및 수리모형실험을 실시하였으며 수치해석을 위해 1차원 수치해석모형인 HEC-RAS와 2차원 수치해석모형인 RMA-2를 이용하여 1, 2차원 수치해석을 실시하였고, Froude 상사법칙을 적용하여 식생 유, 무에 따른 축척된 수리모형실험을 실시하였다. 수리모형실험의 경우 실험결과에 대한 타당성을 위해 축척된 수리모형실험의 유속 및 소류력 결과를 원형으로 환산하여 1, 2차원 수치해석결과와 동일한 조건하에 비교 검토하였고 그 결과 비교적 일치된 결과가 나타난 것으로 확인되었으며 이에 따른 원형으로 환산된 소류력 결과를 기존 연구결과인 호안의 허용소류력과 비교함으로써 블록의 수리학적 안정성을 제시하였다.

• 한국측량학회지
• /
• 제23권3호
• /
• pp.251-260
• /
• 2005

CCD의 개발은 사진측량에 많은 발전을 이루었다. 본 연구는 근접수치사진측량으로 수리모형 해석시 지형 보간최적분석기법에 관한 연구이다. 먼저 근접수치사진측량과 삼각수준측량으로 수리모형의 상사성을 분석하기 위해 통계분석의 일종인 T-검정을 실시하였다 그리고 수치사진측량으로 분석한 수리모형해석을 컴퓨터로 실제지형과 비슷한 형상을 가지는 수치표고모형을 만들기 위해 역거리, 크리깅, 최근린, 불규칙삼각망 보간법 중에서 수리모형 적용에 적합한 최적 보간법을 제시하였다. 수리모형에 대한 기하학적 상사분석을 위해 보간법을 적용 결과, 크리깅 보간법과 불규칙삼각망 보간법이 효율적인 것으로 판단되었다

• 한국항공우주학회지
• /
• 제35권1호
• /
• pp.66-72
• /
• 2007

비행체 설계 접근 방법으로서 무선조종 모형시험 기법 적용 방안을 제시하였다. 본 연구에서 제시된 접근 방법은 동적 상사성을 유지한 축소모형 비행체의 비행특성 분석을 통하여 기본 설계 형상의 타당성을 확인하고 그 결과를 비행체 초기 설계 단계에서 공력 설계 절차에 반영하는 것이다. 축소 비행모형 설계 시 실제적 적용이 가능한 상사 법칙을 개발하기 위하여 비행체 운동을 조종안정성 상사를 위한 회전운동과 비행성능 상사를 위한 병진운동으로 분리하였다. 또한, 무선조종 모형 비행시험을 위한 세부 기법을 개발하였다. 무선조종 비행시험으로부터 얻은 결과를 기초로, 제시된 비행체 설계 접근 방법은 비행체 설계 초기 단계에서 설계 형상 타당성을 확인하는데 유용한 것으로 확인되었다.