• 제목/요약/키워드: Launder

검색결과 55건 처리시간 0.018초

침전지 유출부 구조 Remodeling을 통한 개선사례 연구 (Case Study on Remodeling Outlet Structure within a Sedimentation Basin for Improving Performance)

  • 김성수;박노석;문용택;이선주
    • 상하수도학회지
    • /
    • 제20권6호
    • /
    • pp.911-918
    • /
    • 2006
  • This study was conducted to evaluate the effect of the launder type on settling performance and hydrodynamic behavior within the two certain full-scale sedimentation basins (each flow rate/one basin; $10,000m^3/d$); one is the transverse typed launder(existing basin) and the other is building the finger type launder in combination with the longitudinal baffle. Comparative experimental investigations have been carried out through residual turbidity and particle concentration measurements in each effluent from two basins with the transverse and the finger type launders, respectively. From the experimental results, we could observe that turbidity removal rate in the finger type launder basin (modified basin) is about 30% higher than that in the transverse type launder basin (existing basin). Also, from the measurement of total particle concentration in each effluent, the removal efficiency was improved about 27% within modified basin compared to the existing basin. In order to explain the comparative experimental results and investigate the hydridynamic behavior within each basin in more detail, we conducted computational fluid dynamics (CFD) simulation and verified simulation results with acoustic Doppler velocimetry (ADV) technique. From the CFD simulation, it was investigated that extreme upward flow occurs underneath of the transverse launder. On the other hand, in the case of modified basin, the upward flow, which occurred in the beneath of launder, was much less than that in the existing basins.

저레이놀즈수 난류에 대한 레이놀즈 응력모델 (A Reynolds Stress Model for Low-Reynolds-Number Turbulence)

  • 김광용
    • 대한기계학회논문집
    • /
    • 제17권6호
    • /
    • pp.1541-1546
    • /
    • 1993
  • 본 연구에서는 새로운 유형의 저레이놀즈수 레이놀즈응력모델을 개발하기 위해 Launder등과 Gibson과 Launder에 의해 제시된 레이놀즈응력모델을 벽근처의 저 레이놀즈수 영역까지 확장하였다. 개발된 모델의 성능을 시험하기 위해 두 평판사이 에서 완전히 발달된 2차원 유동을 계산하여 그 결과를 Kimm등에 의해 수행된Navier- Stokes방정식의 직접계산결과와 비교하였으며, 아울러 Launder와 Shima가 제시한 모델로도 계산을 수행하여 그 결과를 비교 검토하였다.

평면 쿠에트 유동의 난류모델에 관한 연구

  • 김광용
    • 대한기계학회논문집
    • /
    • 제14권4호
    • /
    • pp.990-999
    • /
    • 1990
  • 본 연구에서는 레이놀즈 응력모델을 비롯해 Hassid와 Poreh의 1-바정식 모델 과 K-.epsilon.모델을 사용해 난류 쿠에트 유동을 해석하였다. 특히, 레이놀즈 응력모델의 경우에는 단순구배 확산모델(simple gradient diffusion model)과 Hanjalic과 Launder 의 확산모델 및 Dekeyser와 Launder의 확산모델등 세종류의 확산모델을 사용해 계산결 과를 비교하였다.

CFD를 이용한 침전지 구조가 수리거동에 미치는 영향 평가(II): 트라프의 영향 중심으로 (Evaluation of the Effect of Sedimentation Basin Structure on Hydrodynamic Behavior Using CFD (II): The Effect of Trough)

  • 박노석;임재림;이선주;권순범;민진희
    • 상하수도학회지
    • /
    • 제19권6호
    • /
    • pp.758-766
    • /
    • 2005
  • This study was conducted to evaluate the effect of the transverse troughs on hydrodynamic behavior within the a certain full-scale sedimentation basin (flow rate/one basin; $10,000m^3/d$) using CFD simulation and ADV technique. In order to verify the CFD simulation, we measured the factual velocity at 36 points in the full-scale sedimentation basin, whose outlet structure is inadequate, with ADV technique. Both the CFD simulation and the ADV measurement results were in good accordance with each other. From the CFD simulation results of the existing basin, it was investigated that extreme upward flow occurs in the near of two transverse troughs. It was suspected that since the transverse troughs converted the open channel flow into the local closed pipe flow, the increased pressure in this local closed pipe flow region made the extreme upward flow. For solving this problems, it was suggested to modify transverse-typed launder into finger-typed launder and to install a longitudinal baffle in the center in this study. The CFD simulation results of all suggested amendments told us that the extreme upward flow, had occurred especially in the beneath of transverse troughs, was much less in the case of finger typed launder basin than that in the existing basin. Also, it was predicted that installing a longitudinal baffle made the fully developed flow which is more effective for sedimentation.

Influence of Compressibility Modification to k-ε Turbulence Models for Supersonic Base Flow

  • Jeon, Sang-Eon;Park, Soo-Hyung;Byun, Yung-Hwan;Kwon, Jang-Hyuk
    • International Journal of Aeronautical and Space Sciences
    • /
    • 제13권2호
    • /
    • pp.188-198
    • /
    • 2012
  • An improvement to the k-${\varepsilon}$ turbulence model is presented and is shown to lead to better agreement with data regarding supersonic base flows. The improvement was achieved by imposing a grid-independent realizability constraint in the Launder-Sharma k-${\varepsilon}$ model. The effects of compressibility were also examined. The numerical results show that the modified Launder-Sharma model leads to some improvement in the prediction of the velocity and turbulent kinetic energy profiles. Compressibility corrections also lead to better agreement in both the turbulent kinetic energy and the Reynolds stress profiles with the experimental data.

REYNOLDS STRESS MODELING OF OPEN-CHANNEL FLOWS OVER BEDFORMS

  • Choi, Sung-Uk;Kang, Hyeong-sik
    • Water Engineering Research
    • /
    • 제3권4호
    • /
    • pp.247-258
    • /
    • 2002
  • This paper presents a non-isotropic turbulence modeling of flows over bedforms. The Reynolds stress model is used for the turbulence closure. In the model, Launder, Reece, and Rodi's model and Hanjalic and Launder's model are employed f3r the pressure strain correlation term and the diffusion term, respectively. The mean flow and turbulence structures are simulated and compared with profiles measured in the experiments. The numerical solutions from two-equation turbulence models are also provided for comparisons. The Reynolds stress model yields the separation length of eddy similar to the other numerical results. Using the developed model, the resistance coefficients are also estimated for the flows at different Froude numbers. Karim's (1999) relationship is used to determine the bedform geometry. It is found that the values of the form drag and the skin friction are very similar to those obtained by the other turbulence models. meaning higher values of the form drag and lower values of the skin friction compared with the empirical formulas.

  • PDF

확대 및 유선곡률을 가진 디퓨저 흐름의 수치해석 (Numerical Analysis of a Diffuser Flow with Expansion and Streamline Curvature)

  • 이연원
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제22권5호
    • /
    • pp.595-608
    • /
    • 1998
  • A diffuser an important equipment to change kinetic energy into pressure energy has been studied for a long time. Though experimental and theoretical researches habe been done the understanding of energy transfer and detailed mechanism of energy dissipation is unclear. As far as numerical prediction of diffuser flows are concerned various numerical studies have also been done. On the contrary many turbulence models have constraint to the applicability of diffuser-like flows with expansion and streamline curvature. In order to obtain the reliability of k-$\varepsilon$ turbulence model modified combination turbulence models composed of the anisotropic k-$\varepsilon$model modified combination turbulence models composed of the anisotropic k-$\varepsilon$ model with Hanjalic-Launder's preferential normal strain and Pope's vortex stretching mechanism are proposed. The results of the present proposed models prove the fact that the coefficient of pressure and the shear stress are well predicted at the diffuser flow.

  • PDF

정체유동에서의 난류 부상 화염 해석을 위한 Reynolds 응력 모델의 검증 (Assessment of Reynolds Stress Model for the Analysis of Floating Flames in Stagnating Flows)

  • 임용훈;허강열
    • 한국연소학회지
    • /
    • 제7권2호
    • /
    • pp.49-61
    • /
    • 2002
  • Numerical simulation is performed for stagnating turbulent flows of impinging and countercurrent jets by the Reynolds stress model(RSM). Results are compared with those of the ${\kappa}-{\varepsilon}$ model and available data to assess the flow characteristics and turbulence modes. Three variants of the RSM tested are those of Gibson and Launder(GL), Craft and Launder(GL-CL) and Speziale, Sarkar and Gatski(SSG). As well known, the ${\kappa}-{\varepsilon}$ model overestimates turbulent kinetic energy near the wall significantly. Although the RSM is superior to the ${\kappa}-{\varepsilon}$ model, it shows considerable difference according to how the redistributive pressure-strain term is modeled. Results of the RSM for countercurrent jets are improved with the modified coefficients for the dissipation rate, $C_{{\varepsilon}1}\;and\;C_{{\varepsilon}2}$ suggested by Champion and Libby. The performance of the three variants of the RSM model for stagnating flows are assessed.

  • PDF

노년 여성의 내의 구매 행동, 착용 및 관리에 관한 연구 -인천 광역시 중심으로- (A Study on the Elderly Women's Clothing Behavior in Underwear)

  • 정혜원;김구자
    • 한국의류학회지
    • /
    • 제26권5호
    • /
    • pp.737-747
    • /
    • 2002
  • The purpose of this study aimed to evaluate the elderly women's preference to purchase, wear and launder underwear. After having one-to-one interviews with 567 elderly women who they were over 60 in their age in Incheon during the winter of 2000/2001, the differences of their preferences to practicability, economic/comfort, esthetic, symbolic, brand and service were analyzed by SPSS Win pack. When they bought their underwear, they were interested in its practicability most but not its esthetic, brand and service. The more learned and richer economically they were, the shorter sleeves and pants underwear thor had preferences to wear. Most of them wear underwear to keep warm during winter, but some of them wear habitually. They frequently boiled their underwear after washing in warm water with hands. From these tendency underwear for the elderly women should be specified both in bust circumference and in the length of sleeves or pants.

원추형 디퓨져 내의 난류운동에 관한 수치해석적 연구 (Numerical Study on Turbulent Flow in a Conical Diffuser)

  • 강신형;최영석
    • 대한기계학회논문집
    • /
    • 제16권10호
    • /
    • pp.1971-1978
    • /
    • 1992
  • 본 연구에서는 원형 파이프에 원추형 디퓨져가 연결된 덕트 내의 유동장에 대 하여 Launder-Sharma의 저 레이놀즈수 k-.epsilon. 난류모델을 이용하여 수치해석을 수행하였 으며, 수치해석 방법으로는 타원형 방법을 사용하였으며, 앞으로 일반적인 단면의 곡 관이나 스크롤 내부 유동 등의 연구 수행을 감안하여 지배방정식을 일반 비직교 좌표 계로 변환하여 계산을 수행하였다.