• 조명전기설비학회논문지
• /
• 제26권2호
• /
• pp.51-60
• /
• 2012

An improved method for detecting fault distance in overhead transmission lines is described in this paper. Based on single-ended measurement, propagation theory of traveling waves together with the wavelet transform technique is used. In estimating fault location, a simple, but fundamental method using the time difference between the two consecutive peaks of transient signals is considered; however, a new method to enhance measurement sensitivity and its accuracy is sought. The algorithm is developed based on the lattice diagram for traveling waves. Representing both the ground mode and alpha mode of traveling waves, in a lattice diagram, several relationships to enhance recognition rate or estimation accuracy for fault location can be found. For various cases with fault types, fault locations, and fault inception angles, fault resistances are examined using the proposed algorithm on a typical transmission line configuration. As a result, it is shown that the proposed system can be used effectively to detect fault distance.

• Kyungpook Mathematical Journal
• /
• 제61권2호
• /
• pp.409-439
• /
• 2021

We consider partial matchings, which are finite graphs consisting of edges and vertices of degree zero or one. We consider transformations between two states of partial matchings. We introduce a method of presenting a transformation between partial matchings. We introduce the notion of the lattice presentation of a partial matching, and the lattice polytope associated with a pair of lattice presentations, and we investigate transformations with minimal area.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1999년도 PROCEEDINGS OF 99 INTERNATIONAL CONFERENCE OF THE KACG AND 6TH KOREA·JAPAN EMG SYMPOSIUM (ELECTRONIC MATERIALS GROWTH SYMPOSIUM), HANYANG UNIVERSITY, SEOUL, 06월 09일 JUNE 1999
• /
• pp.227-250
• /
• 1999

The reproducibility of successive growth of Bi12TiO20(BTO) single crystals using a top-seeded solution growth (TSSG) pulling method was evaluated by measuring the lattice constants and their standard deviations. A substantial phase diagram in the region close to the stoichiometric BTO was established experimentally for this purpose, and the existence of a retrograde solid solution close to a BTO was clarified. It was emphasize that a starting solution, with a 10.0~10.1 mol% TiO2 concentration, results in large single crystals with a highly homogeneous lattice constant of within $\pm$1x10-4$\AA$, when the solidified fraction of the grown crystal is less than about 45%. A wavelength dispersion of refractive index was measured for the first time, an it was verified that the refractive index of BTO is larger than that of BSO(Bi12TiO20), allowing the voltage sensitivity of EOS higher than the case with BSO as a probe head.

• Journal of Electrical Engineering and Technology
• /
• 제8권1호
• /
• pp.11-19
• /
• 2013

Very Fast Transients (VFT) originate mainly from disconnector switching operations in Gas Insulated Substations (GIS). In order to determine the rate-of-rise of Very Fast Transient Overvoltage (VFTO) in a 550 kV GIS, simulations are carried out using EMTP-RV. Each component of the GIS is modeled by distributed line model and lumped model based on equivalent circuits. The various switching conditions according to closing point-on-wave and trapped charge are simulated, and the results are analyzed. Also, the analysis of travelling wave using a lattice diagram is conducted to verify the simulation results.

• 한국정보통신학회논문지
• /
• 제10권2호
• /
• pp.228-234
• /
• 2006

본 논문은 주어진 재귀 DSP 알고리듬으로부터 최적멀티프로세서 스케줄러를 이용하여 완전한 회로도를 효과적으로 생성할 수 있는 체계적인 과정에 대하여 기술한다. 이과정은 크게 스케줄 생성 단계와 회로도 생성 단계로 구성된다. 스케줄 생성 단계는 입력으로서 Fully Specified Flow Graph(FSFG)로 표현된 재귀 DSP 알고리듬을 받아서 최적 멀티프로세서 스케줄러를 생성하며 회로도 생성 단계에서는 이 스케줄러로부터 제어신호를 포함한 완전한 회로도를 생성한다. 이 회로도는 실리콘 컴파일러를 이용하여 VLSI 레이아웃으로 용이하게 변환될 수 있다. 본 논문에서는 2차 Gray-Market Lattice 필터를 예로 사용하여 전체적인 구현과정을 보인다.

• 대한화학회지
• /
• 제58권6호
• /
• pp.528-534
• /
• 2014

어떤 이성분계용액에서는 상한임계용액온도와 하한임계용액온도가 동시에 나타나는 원형모양의 온도-조성 상도를 보인다. 이러한 현상은 분자간 특정상호작용이 존재하는 경우 나타나는 것으로 알려져 있다. 특정상호작용을 묘사하는 방법에는 여러 가지가 있다. 본 연구에서는 특정상호작용의 총수가 이항분포에 따라 분포한다고 가정하였다. 이 경우 특정상호작용을 Regular 용액이론, Quasichemical 이론 그리고 Flory-Huggins 격자이론에 적용하였을 때 원형모양의 온도-조성 상도를 보이는 경우에 대한 정확한 수학적인 조건을 유도하였다. 그리고 매개변수들이 온도-조성상도에 미치는 영향을 조사하였고, 물-니코틴에 대한 온도-조성상도를 계산하여 실험값과 비교하여 보았다.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제14권2호
• /
• pp.154-161
• /
• 2014

We discuss some interesting sublattices of interval-valued fuzzy subgroups. In our main result, we consider the set of all interval-valued fuzzy normal subgroups with finite range that attain the same value at the identity element of the group. We then prove that this set forms a modular sublattice of the lattice of interval-valued fuzzy subgroups. In fact, this is an interval-valued fuzzy version of a well-known result from classical lattice theory. Finally, we employ a lattice diagram to exhibit the interrelationship among these sublattices.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1999년도 PROCEEDINGS OF 99 INTERNATIONAL CONFERENCE OF THE KACG AND 6TH KOREA·JAPAN EMG SYMPOSIUM (ELECTRONIC MATERIALS GROWTH SYMPOSIUM), HANYANG UNIVERSITY, SEOUL, 06월 09일 JUNE 1999
• /
• pp.81-114
• /
• 1999

The strain, surface and inerfacial energies of III-V ternary systems were calculated for three kinds of structure modes: the Frank-van der Merwe (FM) mode, the Stranski-Krastanov (SK) mode an the Volmer-Wever (VW) mode. The free energy for each mode was estimated as functions of the thickness and composition or lattice misfit. Through comparison of the free energy of each mode, it was found that the thickness-composition phase diagrams of III-V ternary systems can be determined only by considering the balance of the free energy and three kinds of structure modes appear in the phase diagrams. The SK mode appears only when the lattice misfit is large and/or the lattice layer is thick. The most stable structure of the SK mode is a cluster with four lattice layers or minimum thickness on a wetting layer of increasing lattice layers. The VW mode appears when the lattice misfit is large and the lattice layer is thin and only in the InPSb/InP and GaPSb/GaP systems which have the largest lattice misfit of III-V ternary systems. The stable region of the SK mode in the GaPSb/GaP and InPSb/InP phase diagrams is largest of all because the composition dependence of the strain energy of these systems is stronger than that of the other systems. The critical number of lattice layers below which tow-dimensional (2D) layers precede the three-dimensional (3D) nucleation in the SK mode at x=1.0 depnds on the lattice misfit.

• 한국결정성장학회지
• /
• 제9권4호
• /
• pp.424-431
• /
• 1999

The reproducibility of successive growth of $Bi_{12}TiO_{20}$ (BTO) single crystlas using a top-seeded solution growth (TSSG) pulling method was evalutated by measuring the lattice constants and their standard deviations. A substantial phase diagram in the region close to the stoichiometric BTO was established expermentally for this purpose, and the existence of a retrograde solid solution close to a BTO was clarified. It was emphasized that a starting solution, with a 10.0~10.1 mol% $TiO_{2}$ concentration, results in large single crystals with a highly homogeneous lattice constant of within ${\pm}1{\times}10^{-4}\AA$, when the solidified fraction of the grown crystal is less than about 45 %. A wavelength dispersion of refractive index was measrued for the first time, and it was verified that the refractive index of BTO is larger than that of BSO($Bi_{12}TiO_{20}$), allowing the voltage sensitivity of EOS higher than the case with BSO as a probe head.

• Coupled systems mechanics
• /
• 제9권2호
• /
• pp.125-145
• /
• 2020

In this paper, we present a 3D thermo-hydro-mechanical coupled discrete beam lattice model of structure built of the nonisothermal saturated poro-plastic medium subjected to mechanical loads and nonstationary heat transfer conditions. The proposed model is based on Voronoi cell representation of the domain with cohesive links represented as inelastic Timoshenko beam finite elements enhanced with additional kinematics in terms of embedded strong discontinuities in axial and both transverse directions. The enhanced Timoshenko beam finite element is capable of modeling crack formation in mode I, mode II and mode III. Mode I relates to crack opening, mode II relates to in-plane crack sliding, and mode III relates to the out-of-plane shear sliding. The pore fluid flow and heat flow in the proposed model are governed by Darcy's law and Fourier's law for heat conduction, respectively. The pore pressure field and temperature field are approximated with linear tetrahedral finite elements. By exploiting nodal point quadrature rule for numerical integration on tetrahedral finite elements and duality property between Voronoi diagram and Delaunay tetrahedralization, the numerical implementation of the coupling results with additional pore pressure and temperature degrees of freedom placed at each node of a Timoshenko beam finite element. The results of several numerical simulations are presented and discussed.