• JSTS:Journal of Semiconductor Technology and Science
• /
• 제2권2호
• /
• pp.93-101
• /
• 2002

We have proposed and fabricated two lateral type field emission diodes, poly-Si emitter by utilizing the local oxidation of silicon (LOCOS) and GaN emitter using metal organic chemical vapor deposition (MOCVD) process. The fabricated poly-Si diode exhibited excellent electrical characteristics such as a very low turn-on voltage of 2 V and a high emission current of $300{\;}\bu\textrm{A}/tip$ at the anode-to-cathode voltage of 25 V. These superior field emission characteristics was speculated as a result of strong surface modification inducing a quasi-negative electron affinity and the increase of emitting sites due to local sharp protrusions by an appropriate activation treatment. In respect, two kinds of procedures were proposed for the fabrication of the lateral type GaN emitter: a selective etching method with electron cyclotron resonance-reactive ion etching (ECR-RIE) or a simple selective growth by utilizing $Si_3N_4$ film as a masking layer. The fabricated device using the ECR-RIE exhibited electrical characteristics such as a turn-on voltage of 35 V for $7\bu\textrm{m}$ gap and an emission current of~580 nA/l0tips at anode-to-cathode voltage of 100 V. These new field emission characteristics of GaN tips are believed to be due to a low electron affinity as well as the shorter inter-electrode distance. Compared to lateral type GaN field emission diode using ECR-RIE, re-grown GaN emitters shows sharper shape tips and shorter inter-electrode distance.

• 패션비즈니스
• /
• 제11권1호
• /
• pp.61-74
• /
• 2007

Photographic measurement was first made with the subjects of 190 males in their 20s residing in the Ningbo area, Zhejiang Province in China. In this second report, lower body shapes were classified and discriminated by using indirect measurement, measurement items, and lower body analysis. The following sums up the research: 1. The subjects were $8.85^{\circ}$ (hip breadth angle), $1.58^{\circ}$ (abdomen upper angle), $11.80^{\circ}$ (hip upper angle), and $5.12^{\circ}$ (lateral lower body posture angle). 2. The subjects of Chinese males in their 20s showed three types of lower bodies: Bow Legs & Slight Slant of Lateral Lower Body Type (30.5%)-gap between legs, curve waist-hip contour, average abdomen-hip profile, and lateral lower body posture were slightly slanted forward. Adjacent Straight Legs & Slight Slant of Lateral Lower Body Type (35.8%)-adjacent straight between legs, curve waist-hip contour, slim abdomen-hip profile, and lateral lower body posture were slightly slanted forward. Balance Legs & Large Slant of Lateral Lower Body Type (33.7%)-average between legs, straight waist-hip contour, protruding hip profile, and lateral lower body posture were largely slanted forward. 3. Eight useful variables for the categorization of the subjects' lower body types were chosen through stepwise discriminant analysis, and the hit ratio of discrimination was 97.9%.

• 한국동물학회지
• /
• 제32권2호
• /
• pp.120-133
• /
• 1989

꿀벌부채명나방의 후기유충, 전용, 유충 직후용, 4일용, 성충2일전용, 성체에서 뇌를 적출하여 paraidehyde-fuchsin으로 분비활성 신경분비세포만을 염색하여 이 세포들의 분포, 수, 분비물질의 특성등이 변태시기에 따라 변화하는 것으로 추적하였다. 위의 6변태단계 뇌의 뇌간부, 전뇌측부, 시엽근역부, 중뇌, 후뇌에서 4형의 신경분비세포가 동정되었다. 뇌간부에 있는 medial neurosecretory cell은 6변태시기 뇌에서 3-7개이며, 제I형 신경분비세포는 1개를 가지고 있는 성충2일전용을 제외하고는 전반적으로 3개씩 관찰되었다. 전뇌측부에서 관찰되는 lateral neurosecretory cell은 용기와 성충기에서 1-5개가 관찰되었으며 제IV형 신경분비세포가 가장 많았다. 시엽근역부에 분포하는 Optic-lobe neurosecretory cell은 4일용에서만 1개가 관찰되었고 제I형 신경분비세포로 확인되었다. 중뇌에서 관찰되는 deuto cerebral neurosecretory cell은 성충에서만 1개가 관찰되었으며 이 세포는 제II형 신경분비세포이었다. 뇌에 있는 tritocerebral neurosecretory cell은 후기유충과 성충에서 3개와 1개가 각각 관찰되었으며 이 세포중 제I형 신경분비세포는 관찰되지 않았다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.486-489
• /
• 2003

To reduce lateral force of traditional plunger type piston in the swash plate type hydraulic piston pumps and motors, we have proposed rod type piston with ball joint on both ends. We have studied the theoretical reaction force on two types of piston moving in the cylinder block bore. and made an experiment for the resistance force measurement on a reciprocating motion of plunger and rod type piston, changing the test condition such as swash plate angel and supply oil pressure and so on. As a result. a rod type piston has more smaller resistance force, about 29%. than a plunger type one.

• 콘크리트학회논문집
• /
• 제12권4호
• /
• pp.3-14
• /
• 2000

Structural performance of the walls subjected to lateral load reversals depends on various parameters such as loading history, sectional shape, reinforcement, lateral confinement, aspect ratio, axial compression, etc. Thus, the performance of the shearwall for wall-type apartment should be evaluated properly considering above parameters. This study investigates the effect of sectional shape on the structural performance of the wall. Sectional shape of the specimen is rectangular, barbell and T. Based on this experimental results, all specimens behaved as ductile fashion and failed by concrete crushing of the compression zone. Deformation index of those specimens evaluated better than 3 of ductility ratio, and 1.5% of deformability specified by seismic provision. Moreover, the performance of the rectangular shaped specimen, whose compression zone was confined with U-bar and cross tie, was as good as the barbell shaped specimen. Therefore, if we considered construction practice such as workmanship and detailing, shearwall with rectangular section may be more economical lateral load resisting system.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제30권4호
• /
• pp.331-338
• /
• 2004

Stress transfer to the surrounding tissues is one of the factors involved in the design of dental implants. Unfortunately, insufficient data are available for stress transfer within the regenerated bone surrounding dental implants. The purpose of this study was to investigate the concentration of stresses within the regenerated bone surrounding the implant using three-dimensional finite element stress analysis method. Stress magnitude and contours within the regenerated bone were calculated. The $3.75{\times}10-mm$ implant (3i, USA) was used for this study and was assumed to be 100% osseointegrated, and was placed in mandibular bone and restored with a cast gold crown. Using ANSYS software revision 6.0, a program was written to generate a model simulating a cylindrical block section of the mandible 20 mm in height and 10 mm in diameter. The present study used a fine grid model incorporating elements between 165,148 and 253,604 and nodal points between 31,616 and 48,877. This study was simulated loads of 200N at the central fossa (A), at the outside point of the central fossa with resin filling into screw hole (B), and at the buccal cusp (C), in a vertical and $30^{\circ}$ lateral loading, respectively. The results were as follows; 1. In case the regenerated bone (bone quality type IV) was surrounded by bone quality type I and II, stresses were increased from loading point A to C in vertical loading. And stresses according to the depth of regenerated bone were distributed along the implant evenly in loading point A, concentrated on the top of the cylindrical collar loading point B and C in vertical loading. And, In case the regenerated bone (bone quality type IV) was surrounded by bone quality type III, stresses were increase from loading point A to C in vertical loading. And stresses according to the depth of regenerated bone were distributed along the implant evenly in loading point A, B and C in vertical loading. 2. In case the regenerated bone (bone quality type IV) was surrounded by bone quality type I and II, stresses were decreased from loading point A to C in lateral loading. Stresses according to the depth of regenerated bone were concentrated on the top of the cylindrical collar in loading point A and B, distributed along the implant evenly in loading point C in lateral loading. And, In case the regenerated bone (bone quality type IV) was surrounded by bone quality type III, stresses were decreased from loading point A to C in lateral loading. And stresses according to the depth of regenerated bone were distributed along the implant evenly in loading point A, B and C in lateral loading. In summary, these data indicate that both bone quality surrounding the regenerated bone adjacent to implant fixture and load direction applied on the prosthesis could influence concentration of stress within the regenerated bone surrounding the cylindrical type implant fixture.

• The Korean Journal of Ecology
• /
• 제11권2호
• /
• pp.77-82
• /
• 1988

2, 300 specimens of Cobitis taenia lutheri were collected at the Samchon stream, Kui-myon, Wanju-gun, Chollabuk-do province from December, 1984 to November, 1985. Sex ratio and specific lateral color pattern of this subspecies were investigated. During the spawning season, May to Augustm sex dimorphisms in lateral color pattern were remarkable, that is the striped type appeared in most of males and the spotted type largely in femals. Besides the spwaning season both male and female showed the spotted type. These seasonal varaitions of the lateral color pattern were considered to be a significant biological characteristics in this taxon.

• Geomechanics and Engineering
• /
• 제35권5호
• /
• pp.555-570
• /
• 2023

In the current study, a series of experimental and analytical evaluations were performed to introduce the horizontal pseudo static coefficient (kh) as a function of the wall configuration and the reinforcement type for analyzing reinforced soil walls. For this purpose, eight shaking table tests were performed on reduced-scale models of integrated and two-tiered walls reinforced by metal strip and geogrid to determine the distribution of dynamic lateral pressure in the walls. Then, the physical models were analyzed using Mononobe-Okabe method to estimate the value of kh required to establish the dynamic lateral pressures similar to those observed in shaking table tests. Based on the results, the horizontal pseudo static coefficient and the position of resultant lateral force (R) were introduced as a function of the horizontal peak ground acceleration (HPGA), the wall configuration, the reinforcement type as well as maximum wall displacement.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.935-938
• /
• 2001

This paper reports the relation of concrete setting characteristic and lateral pressure in mass concrete wall such as side wall of LNG underground storage tank. In order to estimate the lateral pressure, initial setting time of low heat cement concrete with type of mineral admixture was measured for three concrete mixtures(W/P=41.6%) containing limestone powder, fly ash, and slag powder. As a result, the lateral pressure of the concrete containing limestone powder was the smallest than those of other concretes as well as the initial setting time.

• 패션비즈니스
• /
• 제11권2호
• /
• pp.58-75
• /
• 2007

This study held human measurement for 200 male subjects in their twenties in full age living in Ningbo City, Zhejiang Province in China. Their lower body types were classified and grouped according to shapes and sizes. Consequently, representative body type reflecting shapes, sizes, and characteristics were chosen and presented with their measurement values to be used as the basic data for slacks pattern making and fitness evaluation. The following are the results of the analysis: 1. Homogeneity analysis was given to determine the correspondence relationships among index types, indirect types, and size types. Index Type 1 (H-Round), Indirect Type 2 (Adjacent Straight Legs & Slight Slant of Lateral Lower Body), and Size Type 1 (Medium-Thick) were correlated; Index Type 2 (A-Trapezoid), Indirect Type 1 (Bow Legs & Slight Slant of Lateral Lower Body), and Size Type 3 (Small-Slim) were corresponded; Index Type 3 (A-Balance), Indirect Type 3 (Balance Legs & Large Slant of Lateral Lower Body), and Size Type 2 (Tall-Normal) were mutually related. 2. Mahalanobis distance based on each shape factor (index or indirect) and size factor (absolute) was obtained, while an index-absolute representative body type group (47 people, 24.4%) and an indirect-absolute representative body type group (45 people, 23.7%) were chosen, each reflecting shapes, sizes, and characteristics. 3. The representative body type group of lower body shapes of Chinese males in their 20s had average measurement values, such as 169.15cm (stature), 73.32cm (waist circumference), 75.76cm (omphalion waist circumference), 91.08cm (hip circumference), 106.02cm (outside leg length), 53.96cm (thigh circumference), and 74.42cm (crotch length).