• Clinics in Shoulder and Elbow
• /
• 제10권2호
• /
• pp.199-203
• /
• 2007

목적: 구상돌기는 주관절의 안정성 및 기능에 매우 중요하기 때문에, 구상돌기 골절 시 정확한 골편의 평가 및 고정이 매우 중요하다. 구상돌기 골절에 대한 방사선학적 평가는 주로 주관절 측면 촬영에서 하게 되는데, 요골두와 겹치기 때문에 정확한 관찰이 어려울 수 있다. 이에 저자들은 구상돌기 골절의 평가를 위한 새로운 방사선 촬영 방법, coronoid view를 고안하여 소개하고자 한다. 대상 및 방법: coronoid view는 구상돌기 골절 중 특히 사선의 골절선을 갖는 전내측 골편을 평가하기 위하여 고안되었다. 환자를 촬영대에 대하여 직각이 되게 옆으로 앉힌 후, 환측 견관절을 45도 외전하고, 주관절을 90도 굴곡한 상태에서 촬영대 위에 팔을 놓는다. 필름은 주관절 밑에 놓고, 주관절의 직상방에서 주관절을 중심으로 방사선을 조사한다. 이 방법으로 구상돌기 골절선이 방사선과 평행이 될 수 있으며, 요골두가 겹치는 것을 피할 수 있다. 결론: coronoid view는 구상돌기 골절선이 방사선과 평행이 될 수 있으며, 요골두 음영을 피할 수 있기 때문에 구상돌기 골절의 정확한 평가에 도움이 될 것으로 판단된다. 특히 금속 나사 등의 내고정물 때문에 컴퓨터 단층촬영이 불가능한 관혈적 정복술 후 환자의 경과 관찰에 특히 유용할 것으로 판단된다.

• Journal of Acupuncture Research
• /
• 제19권3호
• /
• pp.230-239
• /
• 2002

Kyphotic cervical curvature, straghtening is commonly caused by trauma, muscle spasm without trauma and wrong posture, etc. Objective : This study is performed to evaluate the clinical effect of neck pain associated with Kyphotic cervical curvatre on cervical x-ray lateral view. Methods : One of the many causes, We examined the patients with neck pain & upper back pain who visited to Department of Acupuncture & Moxibustion, Gumi Oriental Hospital of Kyung-San University from 16th June 1999 to 22th June 2000. Pre and post treatment, We evaluated the cervical angle, Jochumsen's method, VAS(visual analogue scale) and effective score of treatment. Results & Conclusion : 1. Kyphotic cervical curvature is mainly caused by wrong posture during long term, sudden trauma, etc. therfore, postcervical muscles and tendon are injuryed by strong stress. So, muscle imbalance and pain is occured. 2. On these cases, The improvement index for pre/post treatment showed 28/42, 10/15, 9/30, 28/42 degree in cervical angle. Jochumsen's method showed -1/+2, -9/-3, -5/-2, -1/+2mm. Afer treatment VAS is 2, 1, 1, 1 and effective score of treatment is above good. The results suggest that treatments of Oriental Medicine(Acupuncture & Moxibustion, Chu-Na, Cupping and Physical therapy) are effective methods for neck pain with kyphotic cervical curvature on cervical x-ray lateral view.

• Journal of Korean Neurosurgical Society
• /
• 제58권4호
• /
• pp.341-345
• /
• 2015

Objective : To measure the orientation of the facet joints of cervical spine (C-spine) segments in the sagittal plane, known as the pedicle-facet (P-F) angle, and to use these measurements to evaluate the relationship between the P-F angle and the amount of vertebral anterolisthesis in patients with degenerative cervical spondylolisthesis (DCS). Methods : A retrospective case-control study was performed including 30 age- and sex-matched patients with DCS and 30 control participants. Anterior-posterior and lateral view radiographs of the C-spine were obtained in a standing position. The P-F angle at all cervical levels and the amount of anterolisthesis at C4-5 were measured from lateral view plain radiographs. Results : The P-F angles at C4-5 were $141.14{\pm}7.14^{\circ}$ for the DCS group and $130.53{\pm}13.50^{\circ}$ (p=0.012) for the control group, and at C5-6 were $137.46{\pm}8.53^{\circ}$ for the DCS group and $128.53{\pm}16.01^{\circ}$ for the control group (p=0.001). The mean P-F angle at C4-5 did not correlate with the amount of anterolisthesis (p=0.483). The amount of anterior slippage did correlate with age (p<0.001). Conclusion : The P-F angle was intrinsically higher at C4-5, compared to C5-6, in both the DCS and control groups, which might explain the increased likelihood for anterolisthesis of C4. Higher P-F angles in the DCS group may be a predisposing factor to slippage. The P-F angle may interact with age to increase incidence of anterolisthesis with increasing age.

• 한국지역사회생활과학회지
• /
• 제28권1호
• /
• pp.69-79
• /
• 2017

The purpose of this study was to compare fitting of the upper garment by brassiere cup size and types of bodice block. This study conducted a 3D virtual garment system by applying three types of bodice block (I, II, III) and experimental pattern of the bodice block to 3D avatars of four individuals with the following measurements: under bust circumference of 73.5 cm and bust circumferences of 83.5 cm, 86.0 cm, 88.5 cm, and 91.0cm. The results of the study were as follows. First, for 83.5 cm bust circumference (A Cup), appearance of the three types of bodice block (I, II, III) was appropriate. However, as bust circumference increased in size, shape became inappropriate. The depth and width of the armhole, within 15 cm and 11 cm, respectively, were found to be appropriate. In case of 91.0 cm bust circumference (D Cup), all three bodices (I, II, III) were inappropriate. Second, the results of the draft of the experimental patterns of the bodice block of bust circumference measuring 83.5 cm, 86.0 cm, 88.5 cm, and 91.0 cm in the 3D avatars of the four individuals revealed similarities in the frontal view of the silhouette in the four avatars; in the case of the lateral view of the silhouette, lateral width grew wider as bust circumference of the silhouette became larger, but the shape of armhole showed no changes. The depth of the armhole showed little changes from 15.1 cm to 15.22 cm, and the height of sleeve (armscye depth 13.6 cm within +2 cm) remained similar. The difference in width of the armhole from 11.26 cm to 11.37 cm was rather small. The width of the upper sleeve (8.97 cm) seemed to be appropriate as it remained within the 2-3 cm boundary.

• 대한족부족관절학회지
• /
• 제18권4호
• /
• pp.178-182
• /
• 2014

Purpose: The purpose of this study was to evaluate the frequency of troughing and stress fracture, which are the major complications of scarf osteotomy, and to suggest methods to prevent these complications. Materials and Methods: We reviewed 243 cases of 137 patients treated with the scarf osteotomy for hallux valgus from January 2005 to December 2012. The mean follow-up period was 2.8 years. During the scarf osteotomy, a long oblique longitudinal osteotomy was performed in order to decrease the possibility of troughing and stress fracture. Radiographs of lateral view of the foot were obtained and the thicknesses of the first metatarsal base at the sagittal plane were measured and compared. Results: There was no troughing during fragment translation and screw fixation intraoperatively. Radiographs of lateral view of the foot taken preoperatively and at the last follow-up showed that the mean thickness of the first metatarsal was 22.4 mm preoperatively and 21.6 mm at the last follow-up, with a mean difference of 0.8 mm. And no stress fracture was observed. Conclusion: To prevent troughing and stress fracture, a long oblique longitudinal cut, parallel to the first metatarsal plantar surface, was performed, making both ends of the proximal segment truncated cone-shape, and securing the strong bony strut of the proximal segment. No troughing or stress fracture was experienced with scarf osteotomy.

• 대한치과교정학회지
• /
• 제49권2호
• /
• pp.81-88
• /
• 2019

Objective: The aim was to assess the intraobserver and interobserver reliabilities of temporomandibular joint linear measurements and condylar shape classifications performed with cone-beam computed tomography (CBCT). Methods: CBCT images of 30 patients were measured at two different time points by two orthodontists using the Dolphin 3D program (n = 60). Anterior, posterior, and superior joint space measurements and sagittal joint morphology classification in the sagittal view and medial and lateral joint space and mediolateral width measurements and coronal joint morphology classification in the coronal view were recorded. Intraclass-interclass correlation coefficients (ICC) and kappa statistics were used to assess intraobserver and interobserver reliability for the measurements and morphology classifications, respectively. Results: The ICC values were good for measurements of the posterior joint space by observer I and for measurements of the posterior, medial, and lateral joint spaces by observer II, while the other intraobserver measurements were excellent. Only the mediolateral width measurements showed excellent interobserver ICC values, while the other measurements showed good interobserver ICC values. Intraobserver agreement for the sagittal morphology classifications was moderate (${\kappa}=0.479$) and almost perfect (${\kappa}=0.858$) for observers I and II, respectively, while the corresponding agreement for the coronal morphology classifications was substantial for both observers. The interobserver agreement values for sagittal and coronal morphology classifications were slight (${\kappa}=0.181$) and fair (${\kappa}=0.265$), respectively. Conclusions: Linear temporomandibular joint measurements were reproducible and reliable in both intraobserver and interobserver evaluations. However, interobserver agreement for assessments of condylar shape was low.

• PNF and Movement
• /
• 제19권1호
• /
• pp.31-42
• /
• 2021

Purpose: The purpose of this study was to investigate the effect of visual and auditory feedback combined with theraband exercise in rounded shoulder posture. Methods: There were 43 adults with rounded shoulder posture who had a distance of 2.5 cm or more from the posterolateral of the acromion to the table in the supine position that participated. The participants were randomly divided into four groups: those with visual feedback from the lateral view (visual feedback; VFB, n = 11) provided, those with auditory feedback of praise (auditory feedback; AFB, n = 10) provided, those with visual feedback and auditory feedback (visual auditory feedback; VAFB, n = 11) provided, and those without any feedback (control group; CON, n = 11). Theraband exercise with or without feedback was carried out three times per week for three weeks. To confirm the effect of theraband exercise with visual feedback and auditory feedback on pain, range of motion (ROM), posture, and psychological variables were measured before and after exercise in participants with rounded shoulder posture. Results: The VAFB group showed significant differences in pain, ROM, posture, and psychological variables when compared before and after treatment. However, the differences among the VAFB, VFB, AFB, and CON groups were significant in the ROM of abduction, the New York Posture Rating, and the scapular index. Conclusion: In conclusion, theraband exercise combined with visual feedback from the lateral view and auditory feedback by praise improved rounded shoulder posture. Moreover, auditory feedback was more significant statistically than visual feedback.

• Archives of Plastic Surgery
• /
• 제48권1호
• /
• pp.3-9
• /
• 2021

Background For an attractive and natural tip contour in Asian rhinoplasty, insertion of a nasal implant and reinforcement of the cartilaginous framework are essential. However, scar contracture, which often results from augmentation with implant insertion and inadequate soft tissue coverage of the framework, is one of the most common causes of alar retraction. This study reports a novel method of redraping soft tissue along the alar rim to prevent alar retraction in Asians. Methods Twenty young Asian men who underwent primary rhinoplasty with septoplasty were retrospectively reviewed. After the usual rhinoplasty procedures, alar rim redraping was conducted for the soft tissue along the transcolumellar and bilateral infracartilaginous incisions. The longest axis of the nostril (a) and the height of the nostril from that axis (b) were measured in anterior-posterior and lateral views. The preoperative and postoperative ratios (b/a) were analyzed using the paired t-test. Results All 20 patients showed natural contours of the nasal tip, nostrils, and alae after a mean follow-up of 53.6 weeks (range, 52-60 weeks). The ratio of the nostril axes significantly decreased postoperatively in all patients except one, by an average of 11.08%±6.52% in the anterior-posterior view and 17.74%±8.49% in the lateral view (P<0.01). There were no complications, including asymmetry, contracture, subdermal plexus injury, flap congestion, or infection. Conclusions A quantitative analysis of alar retraction by evaluating the ratio of nostril axes showed that alar rim redraping is a simple and effective adjuvant technique for preventing alar retraction in rhinoplasty for young Asian men.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제38권
• /
• pp.38.1-38.10
• /
• 2016

Background: The aims of this study are to evaluate the lip morphology and change of lip commissure after mandibular setback surgery (MSS) for class III patients and analyze association between the amount of mandibular setback and change of lip morphology. Methods: The samples consisted of 14 class III patients treated with MSS using bilateral sagittal split ramus osteotomy. Lateral cephalogram and cone-beam CT were taken before and about 6 months after MSS. Changes in landmarks and variables were measured with 3D software program $Ondemand^{TM}$. Paired and independent t tests were performed for statistical analysis. Results: Landmarks in the mouth corner (cheilion, Ch) moved backward and downward (p < .005, p < .01). However, cheilion width was not statistically significantly changed. Landmark in labrale superius (Ls) was not altered significantly. Upper lip prominence angle (ChRt-Ls-$ChLt^{\circ}$) became acute. Landmarks in stomion (Stm), labrale inferius (Li) moved backward (p < .005, p < .001). Lower lip prominence angle (ChRt-Li-$ChLt^{\circ}$) became obtuse (p < .001). Height of the upper and lower lips was not altered significantly. Length of the upper lip vermilion was increased (p =< 0.01), and length of the lower lip vermilion was decreased (p < .05). Lip area on frontal view was not statistically significantly changed, but the upper lip area on lateral view was increased and change of the lower lip area decreased (p > .05, p < .005). On lateral view, upper lip prominent point (UP) moved downward and stomion moved backward and upward and the angle of Ls-UP-Stm ($^{\circ}$) was decreased. Lower lip prominent point (LP) moved backward and downward, and the angle of Stm-LP-Li ($^{\circ}$) was increased. Li moved backward. Finally, landmarks in the lower incisor tip (L1) moved backward and upward, but stomion moved downward. After surgery, lower incisor tip (L1) was positioned more superiorly than stomion (p < .05). There were significant associations between horizontal soft tissue and corresponding hard tissue. The posterior movement of L1 was related to statistically significantly about backward and downward movement of cheilion. Conclusions: The lip morphology of patients with dento-skeletal class III malocclusion shows a significant improvement after orthognathic surgery. Three-dimensional lip morphology changes in class III patients after MSS exhibited that cheilion moved backward and downward, upper lip projection angle became acute, lower lip projection angle became obtuse, change of upper lip area on lateral view was increased, change of lower lip area decreased, and morphology of lower lip was protruding. L1 was concerned with the lip tissue change in statistically significant way.

• 대한족부족관절학회지
• /
• 제9권2호
• /
• pp.146-150
• /
• 2005

Purpose: We made a radiological comparison between $60^{\circ}$ distal Chevron osteotomy with short armed two parts and $40^{\circ}$ distal Chevron osteotomy with long armed one part performing operation in cases of hallux valgus angle of less than $40^{\circ}$, intermetatarsal angle of less than $15^{\circ}$. Materials and Methods: 12 cases with $60^{\circ}$ distal Chevron osteotomy and 12 cases with $40^{\circ}$ distal Chevron osteotomy were selected from October 2000 to March 2005. We have analysed the hallux valgus angle, 1-2 intermetatarsal angle, metatarsal length, distal metartarsal articular angle and angulation at osteotomy site on lateral view in each radiological films taken at preoperative, postoperative and 3 months after operation presuming bone union. All cases were women, both sides were 9 cases and average age was 52.3 years old. Results: Data taken at preoperative, postoperative and 3 months follow up films in $60^{\circ}$ distal Chevron osteotomy were as follows; the hallux valgus angles were $32.1^{\circ}$, $10.9^{\circ}$, $13.8^{\circ}$, the 1-2 intermetatarsal angles were $13.6^{\circ}$, $8.5^{\circ}$, $8.4^{\circ}$, the metatarsal length were 60.6 mm, 58.8 mm, 58 mm, the distal metartarsal articular angles were $13^{\circ}$, $6^{\circ}$, $6.6^{\circ}$ and 3 cases were over $3^{\circ}$ angulation at lateral view. In $40^{\circ}$ distal Chevron osteotomy, the hallux valgus angles were $34.5^{\circ}$, $11.6^{\circ}$, $15.3^{\circ}$, the 1-2 intermetatarsal angles were $12.7^{\circ}$, $8.2^{\circ}$, $7.8^{\circ}$, the metatarsal length were 59.2 mm, 56.9 mm, 55.9 mm, the distal metartarsal articular angles were $12^{\circ}$, $7.3^{\circ}$, $7.3^{\circ}$ and there were no case with angulation over $3^{\circ}$ at lateral view. Conclusion: In comparison between $60^{\circ}$ distal Chevron osteotomy and $40^{\circ}$ distal Chevron osteotomy measuring at postoperative and follow up, most of all data were similar, but 3 cases over $3^{\circ}$ angulation at lateral view happened in $60^{\circ}$ Chevron osteotomy. This result showed that $40^{\circ}$ distal Chevron osteotomy fixing with screws through long armed one part may have benefit than $60^{\circ}$ distal Chevron osteotomy fixing with K-wires through short armed two parts in making rigid fixation, even though there is a personal difference of technigue.