• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.162-166
• /
• 2011

In railway, Tie supports rail and plays a role that distribute train load to the ballast. Also, Tie and ballast resist against external force and fix the track position. But, weakening resistance of ballast and tie cause vertical displacement of tie and track irregularity. For reinforcement of track stiffness and reduction of track irregularity, KORAIL has developed Multi Branch type tie(GLORY Tie) that reinforced resistance than general PCT and installed in order to test in the field. This study measured and analyzed lateral resistance of ballast, wheel load of rail, bending strain of rail foot, vertical displacement and vibration acceleration of tie in order to evaluate performance of Multi Branch type tie in the field. According to the results of test, Multi Branch tie is excellent than general tie about lateral resistance of ballast and vertical displacement of tie. And, gap of measurement value between Multi Branch type tie and general tie about wheel load of rail, bending strain of rail foot were very small.

• Advances in nano research
• /
• 제8권3호
• /
• pp.229-244
• /
• 2020

In this paper, modified Kelvin's model has been used to analyze the orthotropic vibration frequencies of single walled carbon nanotubes with clamped-clamped and clamped-free boundary conditions. For this system the governing equation is developed with wave propagation approach. Armchair, zigzag and chiral structures are considered for the vibrational analysis to investigate the effect of different modes, in-plane rigidity and mass density per unit lateral area. Throughout the computations, on decreasing the length-to-diameter ratios, the frequencies of said structure increases. In addition, by increasing three different value of in-plane rigidity resulting frequencies also increase and frequencies decrease on increasing mass density per unit lateral area. The results generated using computer software MATLAB to furnish the evidence regarding applicability of present model and also verified by available published literature.

• Structural Engineering and Mechanics
• /
• 제75권2호
• /
• pp.145-155
• /
• 2020

This paper investigates the influence of spatial varations of accidental mass eccentricities on the torsional response of inelastic multistorey reinforced concrete buildings. It complements recent studies on the elastic response of structural buildings and extends the investigation into the inelastic range, with the aim of providing guidelines for minimising the torsional response of structural buildings. Four spatial mass eccentricity configurations of common nine story buildings, along with their reversed mass eccentricities subjected to the Erzincan-1992 and Kobe-1995 ground motions were investigated, and the results are discussed in the context of the structural response of the no eccentricity models. It is demonstrated that when the initial linear response is practically translational, it is maintained into the inelastic phase of deformation as long as the strength assignment of the lateral resisting bents is based on a planar static analysis where the applied lateral loads simulate the first mode of vibration of the uncoupled structure.

• 한국자동차공학회논문집
• /
• 제11권2호
• /
• pp.140-147
• /
• 2003

Full scale durability test in the laboratory is an essential of any fatigue life evaluation of components or structures of the automotive vehicle. Component testing is particularly important in today's highly competitive industries where the design to reduce weight and production costs must be balanced with the necessity to avoid expensive service failure. Generally, hydraulic road simulator is used to carry out the fatigue test and the vibration test. In this paper, the link unit which is able to realize the 3 element forces such as vertical force, lateral force, and longitudinal force that are applied to the road simulator is designed. Also, the designed link is verified with kinematics and inverse-kinematics. From this results, the designed factor satisfied the maximum stroke so that it satisfied the requirements for 3-axial road simulator.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.916-921
• /
• 2004

At present, the highest operation speed of general domestic train is in the level of 140km/h and it is being improved to reach at the level of 200km/h in 2011. The improved environment of train operation speed which inevitably occurs owing to the operation of KTX on the existing line badly requires technology development such as testing and evaluating technology of factors hindering high speed of railway infrastructure including railway bridge, technology to ensure operation safety and technology to evaluate structure stability. Comparing dynamic numerical interpretation for railway truss bridge and load of design standard by using dynamic response measurement and analysis for the railway truss bridge currently in use, this study established the improvement program to ensure the lateral dynamic safety of truss bridge with the increased speed of train.

• 한국해양공학회지
• /
• 제7권1호
• /
• pp.73-80
• /
• 1993

본 연구에서는 장주형 해양구조물의 횡방향 진동에 대한 파라메트릭 가진 효과를 고찰하였다. 먼저, 장주형 해양구조물의 횡방향 운동에 대한 4계 편미방지배방정식을 비선형 Mathieu 방정식으로 유도하였다. 비선형 mathieu 방정식의 해를 구하여 장주형 해양구조물의 동적 반응 특성을 해석하였다. 유체 비선형 감쇠력은 불안정 조건하에 있는 파라메트릭 진동의 반응크기를 제한 하는데 중요한 역활을 한다. 파라메트릭 진동의 경우 가장 큰 반응크기는 Mathieu 안정차트의 첫번째 불안정 구간에서 일어난다. 반면에, 파라메트릭 진동과 강제진동의 결합 진동인 경우, 가장 큰 반응 크기는 두번째 불안정 구간에서 발생된다. 파라메트릭 가진으로 인한 장주형 해양구조물의 횡방향 운동은 동적조건에 따라 subharmonic, superharmonic 또는 chaotic 운동이 되기도 한다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.22-27
• /
• 2003

The running safety of the rolling stock depends on the design characteristics and the contact condition between wheel and railway. In this study, the effect of the conicity of wheel tread on the running safety is analyzed. The modal analysis results in $0.5\~0.6Hz$ natural frequency with lateral modes. However, the frequency analysis for the running simulation shows the frequency components near 1Hz. The running simulation shows that the KTX with GV40 wheel has less lateral vibration than that of XP55 as the KTX goes higher speed.

• 대한조선학회지
• /
• 제23권4호
• /
• pp.19-24
• /
• 1986

Coupled lateral vibrations of shafting is analyzed by the Finite Element Method. In the problem formulation axial force, elastic foundation effects and rotary inertia effects are taken into account. A computer program is developed to calculate natural frequencies of the shafting, and used to calculate natural frequencies of the experimental model shafting, which the author used for the paper[11]. The results show good agreement with the measured values. The results are also compared with those of the Transfer Matrix Method. From the comparison it is found that both results agree each other.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.426-436
• /
• 2006

The use of the CWR track has increased consistently in the worldwide. Because the use of CWR track not only reduces the track maintenance cost, noise and vibration, but increases the life cycle of track components. Therefore, to increase train speed, improve riding condition and secure running stability, the necessity of study on making CWR is increasing. This study includes the development of a thermal buckling theory in the evaluation of curved track stability. The lateral stability of curved CWR is studied for track buckling prevention through the parameter studies. It studied the lateral buckling of the curved CWR track on the 3-D nonlinear analysis. The parameters include rail size, cant, track curvature.

• 한국구조물진단유지관리공학회 논문집
• /
• 제20권4호
• /
• pp.94-103
• /
• 2016

궤도가 역사의 상부에 위치하여 열차운행으로 인하여 발생한 진동이 직접 전달되는 선하역사에서 구조물 진동과 이로 인한 구조물기인 소음이 기준치보다 높은 것으로 나타남에 따라, 기존 선하역사에 대하여 열차 운행의 중단 없이 진동저감이 가능한 경제적, 효율적 방안이 요구된다. 이에 본 연구에서는 진동전달 경로상의 기둥에 워터젯 공법으로 기둥단면에서 피복재 부분을 파쇄한 후 진동전달 절연기능을 가지는 에폭시 소재의 방진재를 보강하여 진동을 저감시키기 위한 구조진동절연시스템을 개발하였다. 방진재의 보강체적을 변수로 한 진동절연 시스템을 실제역사 기둥의 1/4축소모형에 적용하고, 충격가진 시험을 통한 진동저감 성능과 횡하중 반복가력시험을 통한 구조적 성능을 검증하고자 하였다. 충격가진 실험결과로부터 구조진동절연시스템을 적용할 경우 고유 진동주기가 하향되어 진동응답 특성이 변화되고 감쇠비는 약 15~30%까지 증가를 나타내어 진동저감 성능이 있음을 알 수 있었다. 또한 반복하중 가력에 의한 구조성능 실험에서 하중-변위 및 강성변화에 대한 고찰과 연성도 및 에너지 소산의 증가를 보인 결과로 부터 구조부재로의 기능을 유지함을 확인 할 수 있었다.