• 한방안이비인후피부과학회지
• /
• 제17권3호
• /
• pp.126-130
• /
• 2004

Oculomotor nerve palsy presents itself with sudden onset unilateral ptosis and inability to turn the eye upward, downward, or inward, which causes visual disturbances. Strabismus caused oculomotor nerve palsy refers to muscle imbalance that results in improper alignment of the visual axes of the two eyes It may be divided into paralytic and non paralytic strabismus. paralytic strabismus is primarily a neurologic problem. Characteristic clinical disturbances result from lesions of the third, fourth, and sixth cranial nerves. Lesions of the third nerve result in a paralysis of lateral or outward movement and a crossing of the visual axes. Objective: This study was designed to evaluate the effects of oriental medicine therapy on a peripheral oculomotor nerve palsy. Methods & Result: The clinical data was analyzed on a patient with oculomotor nerve palsy whose main symptoms were right side ptosis and inability to turn the eye inward. The patient was treated by the electroacupucture(4Hz frequency, intensity was adjusted so that localized muscle contractions could be seen). As the result, symptoms are improved remarkably. Conclusion: The patient showed right eye ptosis and unilateral deviation of the right eye ball in neutral position. After acupuncture treatment and electroacupuncture treatment, the ptosis and deviation of the patient's right eye was recovered six weeks after the onset. The study suggests that oriental medicine therapy is significantly effective on the treatment of peripheral oculomotor nerve palsy.

• 소성∙가공
• /
• 제23권7호
• /
• pp.425-430
• /
• 2014

The aim of the current study was to predict the plastic deformation behavior of a heated slab during hot rough rolling. FE-simulations were performed to investigate the metal flow and to locate the position of surface material from the slab through the rough rolling and onto the strip, using a material point tracking technique. In addition, experimental hot rolling trials were conducted where artificial defects were impressed onto a heated slab in order to validate the FE-simulation results. The simulated results show the same tendency of deformation behavior as the experimental measurements. The movement of slab defects from the side surface towards the strip center is directly linked to the extent of lateral spread during the rolling.

• 한국운동역학회지
• /
• 제16권2호
• /
• pp.9-19
• /
• 2006

The purpose of this study was to analyze the kinematic variables of the lower limbs joints and the muscle activity for lower limbs during the level and downhill running. The subjects were 6 males of twenties and required to run on the level and downhill which was -7% grade treadmill at 8.3km/h. The running performances were filmed by high speed video camera and EMG signal was gained by ME3000P8 Measurement Unit. Rectus femoris(RF), Vastus lateralis(VL), Gluteus medius(GLU), Biceps femoris(BF), gastrocnemius medial head(GM), gastrocnemius lateral head(GL), Soleus(SO), Tibialis anterior(TA) were selected. The result of this study were as follows: 1. Ankle, knee, hip joint in downhill running showed less movement than the level running but, no significant difference. 2. VL and BF during the support phase in downhill running showed Iess muscle activity than the level running. but RF showed the opposite result. 3. GM, GL, SO adn TA during the supports phase in downhill running showed less muscle activity than the level running.

• 제어로봇시스템학회논문지
• /
• 제11권5호
• /
• pp.445-450
• /
• 2005

In this paper, we suggest an integrated tactile display system that provides kinesthetic force, pressure distribution, vibration and slip/stretch. The system consists of two parts: a 2 DOF force feedback device for kinesthetic display and a tactile feedback device for displaying the normal stimulation to the skin and the skin slip/stretch. Psychophysical experiments measure the effects of fingerpad selection, the direction of finger movements and the texture width on tactile sensitivity. We also investigate the characteristics of lateral finger movement while subjects perceive different textures. From the experimental results, the principal parameters for designing a tactile display are suggested. A tactile display device, using eight piezoelectric bimorphs and a linear actuator, Is implemented and attached to a 2 DOF translational force feedback device to simultaneously simulate the texture and stiffness of the object. As a result, we find out that the capability of the suggested device is sufficient to display physical quantities to display the texture.

• 한국지능시스템학회논문지
• /
• 제23권2호
• /
• pp.100-106
• /
• 2013

본 논문에서는 3개의 바퀴를 취하는 삼각형 구조의 전방향 청소로봇의 설계와 제어에 대해 소개한다. 시뮬레이션과 실험을 통해 제안하는 방법의 동작을 검증한다. 전방향 구조는 어느 방향으로 움직일 수 있다. 천장의 마커를 사용하는 StaGazer 센서를 사용하여 로봇의 위치와 헤딩각을 알아냈다. 추가로 초음파 센서를 부착하여 장애물을 검출할 수 있도록 하였다. 실험을 통해 시스템의 성능을 평가하였다.

• 한국지반공학회지:지반
• /
• 제2권1호
• /
• pp.45-54
• /
• 1986

보강토잡벽에 대한 합리적인 설계 및 시공방법에 관한 경험적인 자료를 제홍하기 위하여 실내 모형실험이 실시되었다. 본 모형실험에서는 각 축조 단계에서의 보강재의 인장력 변화를 보강재상에 부착된 스트레인 게이지에 의하여 계측되었다. 또한 다이알게이지에 의하여 보강토파벽의 수평이동이 측정되었고, 도건의 붕괴형태가 조사되었다. 모형실험에서 측정된 값들은 보강토옹벽에 대한 기존 연구 결과와 비교.논의하였다. 본 모형실험의 중요한 결과는 보강재의 인장력이 벽면가까이에서 최대가 되어 비선형적으로 변화하며, 벽체에 연결된 보강재가 전류에 대한 안정성을 증가시킨다.

• 한국지반공학회논문집
• /
• 제17권2호
• /
• pp.85-93
• /
• 2001

본 논문에서는 연약지반에 시공된 교대말뚝기초에 인접하여 성토하중이 재하될 때 발생하는 측방유동의 발생메커니즘을 규명하기 위해 3차원 유한요소해석을 수행하였다. 본 수치해석에서는 점성토 지반과 점성토-사질토 지반 그리고 사질토-점성토 지반에 선단지지된 강관말뚝에 대하여 성토하중 크기(q=20, 75, 100kPa)와 말뚝두부조건(변위구송, 회전구속) 그리고 말뚝중심간격(s=2.5d, 5.0d, 7.0d, 단독말뚝)에 따라 측방유동압의 분포형태와 크기를 분석하였다. 그 결과 측방유동압의 분포형태는 교대말뚝기초의 수평변위와 유사한 형태로 나타났으며 측방유동압의 크기는 배면 성토하중의 크기에 대한 비로써 결정할 수 있었다. 그리고 점성토 지반과 점성토-사질토 지반의 경우, 측방유동압의 분포형태와 크기는 말뚝두부조건에 가장 큰 영향을 받는 반면 사질토-점성토 지반의 경우에는 말뚝두부조건보다는 토층조건에 가장 큰 영향을 받는 것으로 분석되었다. 본 연구결과를 토대로 연약지반에 시공된 교대말뚝기초의 측방유동에 대한 설계 및 해석시 지침자료로서 측방유동압의 분포형태와 크기를 추천.제안한다.

• 한국농촌건축학회논문집
• /
• 제2권2호
• /
• pp.115-126
• /
• 2000

Retaining walls are used to prevent excessive movement of retained soils. Typical retaining walls include gravity, reinforced concrete, reinforced earth and tie-back. However, from a practical viewpoint there are still drawbacks among these often constructed retaining walls. New types of retaining walls constructed with precast concrete blocks are proposed. This type of retaining wall is incorporates each blocks interconnected with adjacent block by connecting unit to build up a flexible retaining-wall system. This paper focus to behavior characteristics includes deformation and distribution of lateral earth pressure by loading tests and FEM analysis. For model tests, a 1/10 scale reduce models are manufactured include unevenness part, drainage hole and connecting unit and steel wire used to connect each blocks with adjacent block. To simulate the real retaining walls closely, uneven parts are interconnected each other and the construction type of blocks and wall front inclination are varied to investigate the relative displacement of individual block and the location of maximum deformation of wall as increasing surcharging. Additionally, PENTAGON3D, which solve the geotechnical and other problem, used for verifying and comparing with model tests.

• 한국기계가공학회지
• /
• 제15권2호
• /
• pp.22-30
• /
• 2016

It is very important to obtain the net shape of the product to maximize the shear cutting surface of fine blanking. In this paper, the fine blanking die was manufactured to achieve part characteristics, such as flatness and a fully sheared surface. The V-ring in the fine blanking die was designed to prevent lateral movement of the material. The fine blanking experiment was conducted with the fine blanking die. The material usage rate was increased by over 5.7% and that of the water-soluble lubricant was decreased by over 33% when the 2-cavity die technology was applied to fine blanking. The capacity of the existing press could lead to productivity improvement and cost reduction. Thus, 2-cavity die technology for fine blanking with a minute module of an accurate gear for producing seat recliner parts was developed.

• Journal of Oral Medicine and Pain
• /
• 제7권1호
• /
• pp.47-58
• /
• 1982

The author has studied on the clinical features and symptomatology of 97 MPDS patients, who visited the Dept. of Dentistry, Kyungpook National University, from January to September in 1982. The results were as follow : In age and sex distribution of patients in this population, the third decades appeared to have the highest prevalence and the male to female ratio was almost 1 to 2.23. As to occupation, students and housewives were revealed to have the highest incidence of MPDS. The chief complaints of patients were pains, TMJ noises, and limitation of mouth opening in order of frequency, and the most prevalent site of symptom was that of preauricular area. In symptom sequence, the majority of initial symptoms were TMJ noise and pain but limitation of mandibular movement was progressively developed, regardless of nature of early symptoms. Chronic unfavorable oral habits were found to be the most possible predisposing factors in this study. The average maximum interincisal distance was $38.13\pm10.00mm$ in males and $30.73\pm8.75mm$ in females, and a deviation of mandible during mouth opening was observed in 60.8% of patients. In TMJ signs, tenderness of the TMJ to palpation was found in 60.8% of patients and TMJ noise was audible in 50.5% of patients with a stethoscope. The muscles of masticatory system were palpated according to usual methods, and a significant indidence of muscular tenderness was present, with the lateral pteygoid muscles being most frequently involved, followed by masseter, medical pterygoid and temporalis muscles.