• 대한기계학회논문집B
• /
• 제36권3호
• /
• pp.241-249
• /
• 2012

본 논문에서는 유체흐름방향과 예각으로 놓여있는 평면 교차전극 위를 지나가는 입자의 크기에 따른 측면방향 변위에 대하여 소개한다. 아울러, 유체흐름방향과 평면 교차전극 사이의 각도에 따른 측면방향 변위의 변화를 보인다. 본 논문에서는 선전하(line charge) 모델을 이용하여 크기가 다른 세 종류의 형광 polystyrene(PS) 입자의 측면방향 변위를 이론적으로 예측하였다. 크기에 따른 입자의 측면방향 변위의 변화를 이용하여, 크기별로 입자를 연속적으로 분리할 수 있는 측면방향 유전영동 미세분리기를 개발하였다. 3, 5, 10 ${\mu}m$ PS 입자의 혼합물을 이용하여 분리한 실험결과로 부터 개발된 측면방향 유전영동 미세분리기는 3 ${\mu}m$ PS 입자를 99.86%, 5 ${\mu}m$를 98.82%, 10 ${\mu}m$를 99.69%의 높은 효율로 각각 분리할 수 있음을 확인하였다. 이로부터 제안된 측면방향 유전영동 미세분리기는 다종 혼합물로부터 다양한 크기의 입자들을 한 번에 분리하는 기술로 널리 활용될 수 있을 것으로 기대된다.

• 한국분말재료학회지
• /
• 제27권1호
• /
• pp.58-62
• /
• 2020

Recently, electrochromic devices (ECDs) have gathered increasing attention owing to their high color contrast and memory effect, which make them highly applicable to smart windows, auto-dimming mirrors, sensors, etc. Traditional ECDs have a sandwich structure that contains an electrochromic layer between two ITO substrates. These sandwich-type devices are usually fabricated through the lamination of two electrodes and followed by the injection of a liquid electrolyte in the inner space. However, this process is sometimes complex and time consuming. In this study, we fabricated ECDs with a lateral electrode structure that uses only an ITO substrate and an all-in-one electrochromic gel, which is a mixture of electrolyte and electrochromic material. Furthermore, we investigated the EC properties of the lateral-type device by comparing it with a sandwich-type device. The lateral-type ECD shows strong blue absorption as the applied voltage increases and has a competitive coloration efficiency compared to the sandwich-type device.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.548-551
• /
• 2002

The crystallization of amorphous silicon (a-Si) was achieved using a field aided lateral crystallization (FALC) process at 350 $^{\circ}C$. Under the influence of an electric field, Cu is found to drastically enhance the lateral crystallization velocity of a-Si. When an electric field was applied to the selectively Cu-deposited a-Si film during the heat treatment at temperature as low as 350 $^{\circ}C$, dendrite-shaped crystallization of a-Si progressed toward Cu-free region and the crystallization from negative electrode side toward positive electrode side was accelerated. We identified that 1000${\AA}$ thick a-Si film was completely crystallized by Cu-FALC process at 350 $^{\circ}C$ by TEM analysis.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.342-345
• /
• 2002

A new lateral trench electrode IGBT with p+ diverter was Proposed to suppress latch-up of LTIGBT. The p+ diverter was placed between the anode and cathode electrode. The latch-up of LTEIGBT with a p+ diverter was effectively suppressed to sustain an anode voltage of 8.7V and a current density of 1453A/$\textrm{cm}^2$ while in the conventional LTIGBT, latch-up occurred at an anode current density of 540A/$\textrm{cm}^2$. And the forward blocking voltage of the proposed LTEIGBT with a p+ diverter was about 140V. That of the conventional LTIGBT of the same size was no more than 105V. When the gate voltage is applied 12V, the forward conduction currents of the Proposed LTEIGBT with a p+ diverter and the conventional LIGBT are 90mA and 70mA, respectively, at the same breakdown voltage of 150V.

• 한국전기전자재료학회논문지
• /
• 제15권9호
• /
• pp.758-763
• /
• 2002

A new small size Lateral Trench Electrode Insulated Gate Bipolar Transistor (LTEIGBT) is proposed and fabricated to improve the characteristics of device. The entire electrode of LTEIGBT is placed to trench type electrode. The LTEIGBT is designed so that the width of device is 19w. The latch-up current density of the proposed LTEIGBT is improved by 10 and 2 times with those of the conventional LIGBT and LTIGBT. The forward blocking voltage of the LTEIGBT is 130V. At the same size, those of conventional LIGBT and TIGBT are 60V and 100V, respectively. Because the electrodes of the proposed device is formed of trench type, the electric field in the device are crowded to trench oxide. When the gate voltage is applied 12V, the forward conduction currents of the proposed LTEIGBT and the conventional LIGBT are 80mA and 70mA, respectively, at the same breakdown voltage of 150V.

• 대한전자공학회논문지SD
• /
• 제48권3호
• /
• pp.12-17
• /
• 2011

본 논문에서는 기존의 대면적 수평형 GaN (Gallium Nitride) LED (Light-emitting diode) 전극패턴이 갖는 전류의 집중현상 및 소자 내 발열문제를 최소화하고 전기적 광학적 특성의 향상을 위하여 팔각 핑거 타입의 전극패턴을 제안하였고, 범용적으로 사용되는 기본 전극패턴 및 그를 대칭적으로 개량한 전극패턴과의 특성을 비교 분석하였다. 상용 3차원 시뮬레이터 SpecLED/RATRO를 통한 시뮬레이션 결과, 본 연구에서 제안한 팔각 핑거 타입의 전극패턴을 갖는 LED 소자가 동일한 350 mA의 전류주입 하에서의 동작전압이 약 0.34 V 정도 감소되는 전기적 특성의 향상을 확인하였고, 광출력 또한 타 구조에 비하여 약 7.72 mW 정도 향상되는 광학적 특성을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.267-270
• /
• 2001

A new small scaling Lateral Trench Insulated Gate Bipolar Transistor (SSLTIGBT) was proposed to improve the characteristics of the device. The entire electrode of the LTIGBT was replaced with a trench-type electrode. The LTIGBT was designed so that the width of device was no more than 10$\mu\textrm{m}$. The latch-up current densities were improved by 4.5 and 7.6 times, respectively, compared to those of the same sifted conventional LTIGBT and the conventional LTIGBT which has the width of 17$\mu\textrm{m}$. The enhanced latch-up capability of the SSLTIGBT was obtained due to the fact that the hole current in the device reaches the cathode via the p+ cathode layer underneath the n+ cathode layer, directly. The forward blocking voltage of the SSLTIGBT was 125 V. At the same size, those of the conventional LTIGBT and the conventional LTIGBT with the width of 17$\mu\textrm{m}$ were 65 V and 105 V, respectively. Because the proposed device was constructed of trench-type electrodes, the electric field in the device were crowded to trench oxide. Thus, the punch through breakdown of LTEIGBT occurred late.

• Transactions on Electrical and Electronic Materials
• /
• 제2권4호
• /
• pp.15-18
• /
• 2001

A new small scaling Lateral Trench Insulated Gate Bipolar Transistor (SSLTIGBT) was proposed to improve the characteristics of the device. The entire electrode of the LTIGBT was replaced with a trench-type electrode. The LTIGBT was designed so that the width of device was no more than 10 ${\mu}{\textrm}{m}$. The latch-up current densities were improved by 4.5 and 7.6 times, respectively, compared to those of the same sized conventional LTIGBT arid the conventional LTIGBT which has the width of 17 ${\mu}{\textrm}{m}$. The enhanced latch-up capability of the SSLTIGBT was obtained due to the fact that the hole current in the device reaches the cathode via the p+ cathode layer underneath the n+ cathode layer, directly. The forward blocking voltage of the SSLTIGBT was 125 V. At the same size, those of the conventional LTIGBT and the conventional LTIGBT with the width of 17 ${\mu}{\textrm}{m}$ were 65 V and 105 V, respectively. Because the proposed device was constructed of trench-type electrodes, the electric field In the device were crowded to trench oxide. Thus, the punch through breakdown of LTEIGBT occurred late.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.183-184
• /
• 2005

In this paper. a new small size Lateral Trench Electrode Power IGBT is proposed. The entire electrode of proposed LIGBT is placed in trench oxide. The forward blocking voltage of the proposed LIGBT is improved by 1.6 times with that of the conventional LIGBT. The forward blocking voltage of proposed LIGBT is 500V. At the same size. a increase of the forward blocking voltage of about 1.6 times relative to the conventional LIGBT is observed by using TMA-MEDICI which is used for analyzing device characteristics. Because the electrodes of the proposed device are formed in trench oxide. the electric field in the device are crowded to trench oxide. We observed that the characteristics of i the proposed device was improved by using TMA-MEDICI and that the fabrication of the proposed device is possible by using TMA-TSUPREM4.

• 전기학회논문지
• /
• 제56권4호
• /
• pp.773-776
• /
• 2007

A microstructure array has been proposed for micro plasma generation using electroplating and double exposed process. A stable atmospheric plasma has been generated at a low voltage by utilizing the micro electrode gap. Self-aligned microstructure can provide uniform electrode overlap with precisely controlled gap between the electrodes. The proposed structure allows for triode operation, which can expand the generated plasma over a large area by applying a lateral electric field. Electrical characteristics of the micro triode confirm the large numbers of the plasma ions are drifted to the secondary cathode by the lateral electrical field.