• Journal of the Optical Society of Korea
• /
• 제18권5호
• /
• pp.611-615
• /
• 2014

We report high-speed pulse train generation from a relatively low-speed 10-GHz mode-locked laser by means of line-by-line spectral coding. To increase the pulse repetition rate multiplication (RRM) factor, we combine coding schemes for both spectral intensity and phase by placing a simple mask at the coder focal plane. The resulting RRM factor, determined by multiplying the RRM factors of the individual coding schemes, rises as high as 16. To verify the generated pulses, the optical spectra and autocorrelation traces are examined.

• Bulletin of the Korean Chemical Society
• /
• 제34권1호
• /
• pp.279-282
• /
• 2013

• Bulletin of the Korean Chemical Society
• /
• 제34권5호
• /
• pp.1361-1365
• /
• 2013

The smallest ketenimine and hydrogen cyanide N-methylide ($CH_2CNH$ and $CH_2NCH$) are provided from the argon/acetonitrile matrix samples exposed to radiation from laser ablation of transition-metals. New infrared bands are observed in addition to better determination of the vibrational characteristics for the previously reported bands, and the $^{13}C$ substituted isotopomers ($^{13}{CH_2}^{13}CNH$ and $^{13}CH_2N^{13}CH$) are also generated. Density functional frequency calculations and the D and $^{13}C$ isotopic shifts substantiate the vibrational assignments. $CH_2CNH$ is probably produced through single-step conversion of $CH_3CN$, whereas $CH_2NCH$ through two-step conversion via 2H-azirine. Inter-conversions between these two products evidently do not occur during photolysis and annealing.

• 한국멀티미디어학회논문지
• /
• 제18권1호
• /
• pp.65-70
• /
• 2015

Particle accelerator has mainly used in nuclear field only because of the large scale of the facility. However, since laser-plasma particle accelerator which has smaller size and spends less cost developed, the availability of this accelerator is expended to various research fields such as industrial and medical. This paper suggests a visualization system to control the laser-plasma particle accelerator efficiently. This system offers real-time 3D images via convert HDF file comes from plasma data obtained from PIC simulation into OpenGL texture type to analyse and modify plasma data. After that, it stores high-resolution rendering images of the data with external renderer hereafter.

• Bulletin of the Korean Chemical Society
• /
• 제8권5호
• /
• pp.403-405
• /
• 1987

A dynamic laser light scattering system has been constructed using a personal computer. The intensity of the scattered light was detected with a photomultiplier tube and a photon counter. The BCD output of the photon counter which is proportional to the intensity of scattered light is fed into a personal computer via an interface card. The personal computer was programmed as an autocorrelator in machine language. The data acquisition rate of the system was about 600 samples/s which is adequate for studies on the molecular dynamics of concentrated polymer solutions, polymer latices with large particle size, and polymer glass systems. The constructed system was tested with polystyrene latex and the measured diameter of the latex particle agrees well with the supplier's value.

• Journal of the Korean Physical Society
• /
• 제73권10호
• /
• pp.1458-1465
• /
• 2018

We present a constructed setup for polarizing $^{129}Xe$ noble gas. Hyperpolarized $^{129}Xe$ has been obtained via spin exchange with an optically pumped rubidium vapor. Optical pumping is based on polarizing the valence electron of rubidium by the resonant absorption of a circularly polarized laser light. The magnetic field of 30 G was used for obtaining $^{129}Xe$ polarization. The apparatus for detecting polarization is a nuclear magnetic resonance spectrometer. The highest $^{129}Xe$ polarization of 54% has been obtained using 60 W circularly polarized laser light with wavelength of 794.7 nm. The measured longitudinal relaxation time of the hyperpolarized $^{129}Xe$ was 72.3 minutes.

• Journal of Chest Surgery
• /
• 제30권12호
• /
• pp.1237-1241
• /
• 1997

기관협착에서 기관절제 문합술을 적용할 수 없을 경우 레이저 소작술은 고식적 치료수기 중 하나로 사용 되고 있다. 저자들이 1995년부터 1996년 5월까지 기도폐쇄병변에서 기도재건수술 전 또는 후에 KTP (Potassium Titanyl Phosphate)레이저를 이용하여 굴곡성 기관지경의 생검용 채널로레이저 소작술을 시행한 치료결과를 보고한다. 레이저 소작술받은 환자는 모두 7명이며, 이중 남자는 3명 여자는 4명이었으며, 평균연 령은 43.7세이었다. 대상환자의 기관협착의 일차 원인은 외상에 의한 기관절개술후 협착의 3례와 폐혈증으로 인한 장기간의 기관튜브삽관이 원인이된 1례, 기관 결핵이 1례, 그외, 폐암이 기관내에 국소 재발한 2례이었다. 레이저 소작술의 치료 대상이 된 기도협착의 경우는 절제 문합후 문합부의 협착재발이 2례, 기관절개소공의 협착이 3 례, 폐암이 국소 재발한 2례이었다. 기관협착기 부위는 삽관의 풍선부위(기관절개공이 형성된 자리로 부터 3-4 cm 하부, carina 상방 2~3 cm)가 1례, 문합부위가 5 mm이하로 좁아진 경우가 4례있었으며, 기관내의 협착랭변은 전벽에서 2명, 후벽에서 1명, 기관전주위(circumferential)협착인 경우가 2명이였다. 레이져 소작술은 평균 25.4$\pm$5.9분의 시간이 걸렸으며, 1768$\pm$365J의 에너지가 조사되었다. 레이저 소작술 실시 후 환자들은 현저한 증상의 호전을 볼 수있었으며, 기관지 내시경하에서 기관의 내경이 7mm이상 커진 것을 확인 할 수 있었다. 레이저소작술 후 합병증으로는 경미한 기관지경축(bronchospasm)이 1례있었다. 레이저소작술을 시행한 후 협착이 재발한 환자 3명에서 보조적 방사선치료를 병행하였다. 방사선 치료가 섬유아 세포의 거대성장을 예방하는 것에 착안하여 기관지내시경하 레이저소작술실시 직후, 4시간 안에 방 사선을 외부조사하였다. 보조적 방사선치료 후 환자들은 현재 10개월이 지나는 동안 재협착이 발생되지 않았다.

• 한국정밀공학회지
• /
• 제24권1호
• /
• pp.64-70
• /
• 2007

A long-exposing technique (LET) has been conducted to create nanoscale patterns applicable to diverse micro-devices using two-photon polymerization (TPP). By the weakly-polymerized region via the LET, double-layered embossing patterns can be fabricated simply in a single step. The LET makes possible a voxel and its surrounding to be fully grown into more than 500 nm in lateral size and weakly-polymerized region (WPR), respectively. In the WPR. interconnecting ribs between voxels are generated, and they lead to the creation of double-layered dot patterns. Moreover, by controlling the distance between voxels, various shapes of interconnecting rib can be fabricated when the LET is applied. Various embossing patterns were fabricated to evaluate the usefulness of the proposed technique as a novel nanopatterning technique in TPP.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2001년도 3rd Korea-Japan Advanced Semiconductor Packaging Technology Seminar
• /
• pp.183-192
• /
• 2001

1- Buildup PCB technology is utilized to a bare chip attach substrate technology for packaging of semiconductor chip 2- Requirement for the substrate design rule is described in SIA International Technology Roadmap for Semiconductor. 3- There are seven fabrication methods of build-up technology. 4- Coating and lamination for resin and photo, and laser for micro via hope processes are available. Below $50\mu\textrm{m}$ in diameter is possible. 5- Fine pitch lines down to $30\mu\textrm{m}$ can be achieved by pattern plating with better electrical property. 6- Dielectric loss reduction is a key material improvement item for next generation build-up technology. 7- High band width up to 512 GB/s is possible with current wiring groundrule.

• 한국생산제조학회지
• /
• 제25권6호
• /
• pp.421-425
• /
• 2016

Micro-EDM is one of the recent fine-machining technologies. Micro-EDM is widely used in precision processes because products manufactured via EDM are free from workpiece hardness. However, the debris produced during the process cause many problems such as reduced precision of the process. The first solution of this problem involves using the milling hole process. Micro-EDM hole process involves an electrode moving rapidly in the vertical direction via a servo system to disperse debris. However, this process can cause reduced work efficiency owing to contact between the electrode and workpiece. In this study, ultrasonic vibration is added to micro-EDM channel machining. Ultrasonic vibration removes the debris during machining and enables precision machining. Consequently, a clean work environment for the subsequent processes is maintained.