• 제목/요약/키워드: Laser transmission

검색결과 430건 처리시간 0.025초

다극형 스파크 간격을 사용한 질소레이저의 제작과 그 동작 특성 (Construction and operational characteristics of a nitrogen lawer system employing a multiplex spark gap)

  • 양준묵;김윤주;추한태;이치원
    • 한국광학회지
    • /
    • 제7권1호
    • /
    • pp.28-36
    • /
    • 1996
  • 질소레이저의 출력을 높이고 안정성을 향상시키기 위한 방법의 하나로 8쌍으로 구성된 다극형 스파크 간격과 Blumlein 형태의 다중 평행판 축전기형 전송회로로 구성된 레이저 장치를 제작하였고 실험은 스파크 간격을 자체트리거하는 방식과 외부트리거하는 두가지 방식을 택하여 실시하였다. 그 결과 긴 레이저관에 대하여 하나의 스파크 간격이 레이저관 전체를 통하여 레이저를 균일하고 완벽하게 발진시킬수는 없음을 확인하였으며 다극형 스파크 간격을 사용할 경우에도 스파크 간격 모두가 한 몸체처럼 완벽한 역할을 하지 못함을 확인하였다. 그러나 이와 같은 복합적인 결과로 부터 다극형 스파크 간격이 레이저 출력 증가에 기여를 할 수 있음을 확인하였고 그의 설치 범위는 레이저관의 길이(또는 전송회로의 두께)의 3/4이 최적임을 알았다.

  • PDF

수중 및 대기공간에서 LASER 광통신의 전송특성 (Transmission Characteristics of Laser Light Communication in Water and Atmospheric Media)

  • 김영권
    • 대한전자공학회논문지
    • /
    • 제8권4호
    • /
    • pp.17-24
    • /
    • 1971
  • 직접광검파방식에 의하여 변조된 LASER광을 수중 1m 및 대기공간 1krn의 거리에 전송하여 검파했다. 이 검파를 자승검파법으로 해석했으며 이 실험에 사용한 검파장치의 설계와 구성을 밝혔다. 전파특성의 정량적 해석은 못했지만 기후조건에 따른 전파경향을 알아냈다. 기후변화에 따른 전파특성은 평균 25dB정도 감쇠했으며 수중에서의 감쇠계수는 약 0.4(m-1)이였다.

  • PDF

레이저를 이용한 송전선 위해물질 감지시스템 (Power Transmission Line Hazardous Material Surveillance System Implemented Laser Scanning)

  • 박강숙;손태호
    • 한국ITS학회 논문지
    • /
    • 제11권4호
    • /
    • pp.95-103
    • /
    • 2012
  • 본 논문에서는 송전선로 중장비 접촉사고 방지를 위한 감시 시스템을 구현하였다. 시스템의 설계는 레이저 스캔기술을 적용하여 설계하였다. 설계한 시스템의 세부적 기능을 분석하였다. 감시 시스템을 구현하여 감시파라미터인 검출율과 오류율을 측정하였으며 기존 감시시스템과 비교하였다. 측정결과 기존대비 검출율은 95.8%에서 100%로 향상되었고, 오류율은 2.1%에서 0%로 개선된 결과를 보였다. 연구한 시스템은 접촉사고에 가능성이 있는 위해 개소의 중장비를 감지하고 현장작업자와 관리자에게 정보를 제공하여 사고를 예방해 주는 시스템이므로 송전선로 접촉사고 방지를 위한 감시시스템에 유용하다.

PSD 센서와 Laser를 이용한 데이터 전송 시스템 구현 (Implementation of Data Transmission System Using PSD Sensor and Laser Diode Module)

  • 김명환;마근수;이재득
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 제36회 하계학술대회 논문집 D
    • /
    • pp.3016-3018
    • /
    • 2005
  • The PSD(Position Sensitive Detector) is a sensor for detecting the position of incident light. Because of its various advantages, it is used for position and angle sensing, optical range finders, laser displacement sensing, and etc. In the previous study of the position finding system, the laser tracking robot is developed. Small data rate and unidirectionality is the characteristics of data communication both DSP-based pan/tilt control board and the robot. If we can transmit data to the target using PSD sensor and laser diode module, there is no need for communication devices such as the bluetooth and wireless module. For this reason, this paper presents the new method for data transmission. Transmit data using RS-232 is modulated by a VTF(Voltage To Frequency) converter The laser diode module transmits the modulated data. And then the PSD sensor receive that data. Demodulation process is accomplished by the system which is consisted with trans-impedance amplifier, FTV(Frequency To Voltage) converter, and etc.

  • PDF

Terahertz transmission through femtosecond-machined metal structures

  • Lee, J.U.;Seo, M.;Kim, D.S.;Jeoung, S.C.;Park, Q-Han
    • 한국레이저가공학회:학술대회논문집
    • /
    • 한국레이저가공학회 2005년도 춘계학술발표대회 논문집
    • /
    • pp.102-103
    • /
    • 2005
  • Using THz time-domain spectroscopy, we study plasmonic band gaps in periodic metal arrays of slits. Femtosecnd machining system guarantees good quality sub millimeter structures for THz spectroscopy. Fabry-Perot effect enhances the transmission when the two resonances cross but does not alter the surface plasmon peak positions.

  • PDF

1.25 Gb/s Broadcast Signal Transmission in WDM-PON Based on Mutually Injected Fabry-Perot Laser Diodes

  • Yoo, Sang-Hwa;Mun, Sil-Gu;Kim, Joon-Young;Lee, Chang-Hee
    • Journal of the Optical Society of Korea
    • /
    • 제16권2호
    • /
    • pp.101-106
    • /
    • 2012
  • We demonstrate a cost effective broadcast signal transmission at 1.25-Gb/s with 100 GHz channel spacing based on a broadband light source (BLS) for a wavelength division multiplexing-passive optical network (WDM-PON). The BLS is implemented by using mutually injected Fabry-Perot laser diodes (MI F-P LDs). The error-free transmission without a forward error correction (FEC) is achieved by its low relative intensity noise (RIN). The number of usable modes is determined by RIN and/or extinction ratio (ER) in the spectrum sliced light output.

치과용 레이저 조사가 배양 치수 섬유모세포에 미치는 영향에 관한 연구 (The EFFECTS OF DENTAL LASER ON PULP FIBROBLAST IN VITRO)

  • 정혜전;민병순
    • Restorative Dentistry and Endodontics
    • /
    • 제22권2호
    • /
    • pp.519-535
    • /
    • 1997
  • The responses of human pulp fibroblastic cells to Ga-As Semi-Conductor-Dens-Bio Laser (Frequency: 5 Hz~10,000 Hz Model: SD-101A RCA, U.SA)) were examined in vitro using pulp fibroblastic cells obtained from the pulp tissue of human tooth. The mitogenic effect of soft laser was assessed by measuring the MTT assay. The morphologic effect for soft laser showed under the scanning and transmission electron microscopy. The results as follows; 1. The mitogenic response of the soft laser was not observed until 4th time of radiation, while the mitogenic response at 4th time increased mitogenic effect by as much as 1.7 fold compared to the control value. 2. The mitogenic response of the soft laser on pulp fibroblast differ from the mitogenic response on other fibroblasts. 3. In scanning electron microscopic study, The microvilli of cell surface increased gradually with width and length after laser radiation, it demonstrate that development of microvilli have close connection with differentiation of cells. 4. Under the transmission electron microscope, The laser-treated cells maintained their elongated shape and a high degree of cellular polarization. The large cell body containing a well developed Golgi complex, a large number of profiles of rough endoplasmic reticulum, and great numbers of mitochondria. 5. The laser-treated cells maintained the long straight bundles of closely apposed microfilaments or individual filaments forming a cross-linked network. These findings suggest that the laser may have important roles in promotion of pulp healing and consequently may be useful for clinical application in pulp regenerative procedures.

  • PDF

레이저 다이오드를 이용한 수중 광 정보 및 전력 동시전송 (Underwater Simultaneous Light Information and Power Transmission using a Laser Diode)

  • 김성만;신재우
    • 한국전자통신학회논문지
    • /
    • 제17권5호
    • /
    • pp.853-858
    • /
    • 2022
  • 본 논문에서는 레이저 다이오드를 활용하여 수중 광 전력과 수중 광 무선통신의 동시전송을 연구하고 이에 대한 실험 결과를 보인다. 본 실험에서는 송신부에 전/광 변환을 위한 레이저 다이오드를 사용하고 수신부에는 광/전 변환을 위한 태양전지를 사용하였다. 수중 전송 실험을 위해서는 플라스틱 관에 물을 채워 구현하였으며, 수중 광 무선통신 및 수중 광 무선충전을 위해 레이저 송신단과 수신단 시스템을 최적화하였다. 본 실험에서는 100 mW 급 레이저를 사용하였으며, 레이저의 최대 전/광 변환효율을 18.5 % 였다. 수중 광 무선충전 및 수중 광 무선통신의 동시전송 실험결과, 수중에서 최대 5 m 전송시에 0.33 %의 DC-to-DC 전송효율을 보였으며, 수중 무선 광통신은 수중에서 1 m 전송시에 최대 50 kbps의 전송속도를 보였다.

Design of a Fresnel Lens for a Solar End-pumped Solid-state Laser

  • Ou, Mingyu;Hu, Pian;Lan, Lanling;Liu, Yan;Zhou, Jun;Shi, Xiaotao
    • Current Optics and Photonics
    • /
    • 제4권5호
    • /
    • pp.441-445
    • /
    • 2020
  • A novel design for a Fresnel lens for a solar end-pumped laser is demonstrated in this paper. The new hybrid Fresnel lens includes two parts, inner and outer. The inner part is a twice-total-internal-reflection and vertical-transmission lens. The outer part is a once-total-reflection and vertical-transmission lens. The radius of the Fresnel lens is 600 mm, and its focal length is 750 mm. The concentrating performance of the Fresnel lens is examined using TracePro. The results show that the concentration efficiency has been greatly improved. The total concentration efficiency of the hybrid Fresnel lens reaches 73.2% when the radius of the laser rod is 3 mm. This design can simplify the concentration system of a solar end-pumped solid-state laser.