• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.393-398
• /
• 2002

This study proposes a method to reduce error scanning data of laser scanner. The method co of 3 stages. First, there is an error indu difference of the distance between the prob the object. It is possible to reduce the e planning a scanning strategy: object settin path. Second, the scan data loss of the tooli affects calculating the tooling ball con z-direction compensation is given to calculat accurate registration points. Third, three p used to determine a transformation matrix on frame. As merging, the maximum error usually on the third tooling ball in the conven method, which select a point among three po randomly. We find the centroid of 3 points apply it to determine a new transformation mat

• Archives of Metallurgy and Materials
• /
• 제67권4호
• /
• pp.1497-1501
• /
• 2022

In-situ observation of the transformation behavior of acicular ferrite in high-strength low-alloy steel using confocal laser scanning microscopy was discussed in terms of nucleation and growth. It is found that acicular ferrite nucleated at dislocations and slip bands in deformed austenite grains introduced by hot deformation in the non-recrystallization austenite region, and then proceeded to grow into an austenite grain boundary. According to an ex-situ EBSD analysis, acicular ferrite had an irregular shape morphology, finer grains with sub-grain boundaries, and higher strain values than those of polygonal ferrite. The fraction of acicular ferrite was affected by the deformation condition and increased with increasing the amount of hot deformation in the non-recrystallization austenite region.

• 소성∙가공
• /
• 제26권1호
• /
• pp.35-40
• /
• 2017

Laser forming is an advanced process in sheet metal forming in which thermal stress originated from the laser heat source is used to shape the metal sheet. However, substantial waiting time is normally necessary for the workpiece to cool down between consecutive scans so that a steep temperature gradient can be reestablished in the next scan. In order to solve this drawback, laser bending characteristics are experimentally implemented in underwater condition. Laser forming effects under various conditions, including different laser power, scanning velocity, beam diameter, number of passes and material, are investigated. The results show that the underwater laser forming facilitates deliberate forming. The bending angle per respective laser scan is decreased with increasing the number of passes and scanning velocity.

• 대한공간정보학회지
• /
• 제14권3호
• /
• pp.79-86
• /
• 2006

현재 3차원 지상 레이저 스캐너를 통해서 짧은 시간에 대상물의 수많은 위치에 대한 고정도의 3차원 좌표를 얻을 수 있다. 그래서 최근에 지상 레이저 스캐닝은 측지분야를 포함하여 토목공학, 고고학 및 건축, 그리고 응급서비스 및 국방, 기타 등 다양한 분야에서 널리 응용되고 있다. 본 연구는 지상 라이다를 이용한 현황측량을 다루었으며, 실험측량 결과 대상물의 선형 특징추출이 가능하였으며 토탈스테이션 측량성과에 필적하는 위치결정 정확도를 얻었다. 이를 통해 향후 항공 라이다와 항공사진측량기술과의 결합에 의해 지상 레이저 스캐닝의 잠재응용분야는 더욱 증대될 것으로 기대된다.

• Nuclear Engineering and Technology
• /
• 제54권9호
• /
• pp.3293-3298
• /
• 2022

Removing radioactive contaminated metal materials is a vital task during the decommissioning of nuclear power plants to reduce the cost of the post-dismantling process. The laser decontamination technique has been recognized as a key tool for a successful dismantling process as it enables a remote operation in radioactive facilities. It also minimizes exposure of workers to hazardous materials and reduces secondary waste, increasing the environmental friendless of the post-dismantling processing. In this work, we present a thorough and efficient laser decontamination approach using a single-mode continuous-wave (CW) laser. We subjected stainless steels to a surface-removal process that repetitively exposes the laser to a confined region of ~75 ㎛ at a high scanning rate of 10 m/s. We evaluate the decontamination performance by measuring the removal depth with a 3D scanning microscope and further investigate optimal removal conditions given practical parameters such as the laser power and scan properties. We successfully removed the metal surface to a depth of more than 40 ㎛ with laser power of 300 W and ten scans, showing the potential to achieve an extremely high DF more than 1000 by simply increasing the number of scans and the laser power for the decontamination of primary circuits.

• 대한금속재료학회지
• /
• 제50권3호
• /
• pp.191-200
• /
• 2012

The purpose of this paper is to review the state of laser processing technology using metal powders. In recent years, a series of research and development efforts have been undertaken worldwide to develop laser processing technologies to fabricate metal-based parts. Layered manufacturing by the laser melting process is gaining ground for use in manufacturing rapid prototypes (RP), tools (RT) and functional end products. Selective laser sintering / melting (SLS/SLM) is one of the most rapidly growing rapid prototyping techniques. This is mainly due to the processes's suitability for almost any materials, including polymers, metals, ceramics and many types of composites. The interaction between the laser beam and the powder material used in the laser melting process is one of the dominant phenomena defining feasibility and quality. In the case of SLS, the powder is not fully melted during laser scanning, therefore the SLS-processed parts are not fully dense and have relatively low strength. To overcome this disadvantage, SLM and laser cladding (LC) processes have been used to enable full melting of the powder. Further studies on the laser processing technology will be continued due to the many potential applications that the technology offers.

• 한국측량학회지
• /
• 제29권4호
• /
• pp.429-438
• /
• 2011

LiDAR technology is a combination of laser ranging, satellite positioning technology and digital image technology for study and determination with high accuracy of the true earth surface features in 3 D. Laser scanning data is typically a points cloud on the ground, including coordinates, altitude and intensity of laser from the object on the ground to the sensor (Wehr & Lohr, 1999). Data from laser scanning can produce products such as digital elevation model (DEM), digital surface model (DSM) and the intensity data. In Vietnam, the LiDAR technology has been applied since 2005. However, the application of LiDAR in Vietnam is mostly for topological mapping and DEM establishment using point cloud 3D coordinate. In this study, another application of LiDAR data are present. The study use the intensity image combine with some other data sets (elevation data, Panchromatic image, RGB image) in Bacgiang City to perform land cover classification using neural network method. The results show that it is possible to obtain land cover classes from LiDAR data. However, the highest accurate classification can be obtained using LiDAR data with other data set and the neural network classification is more appropriate approach to conventional method such as maximum likelyhood classification.

• 지구물리
• /
• 제10권1호
• /
• pp.27-35
• /
• 2007

터널공사의 필요에 따라 그 시공방법은 많은 발전을 해왔으나 아직도 시시각각으로 일어나는 터널 공사중의 사고는 조속히 극복해야할 과제다, 이러한 위험요소를 빨리 발견하고 대비하기 위해서는 계측의 정확성과 신속성이 요구되고 있으나 아직도 천단침하 및 내공변위 계측에 줄자, 레벨 또는 Total Station 등을 이용하는 일반적인 측량방법에 의존하고 있다.터널의 변형계측을 위한 일반측량방법은 사람이 직접 그 측점에 접근해야하며, 관측에 시간이 많이 소요되고, 관측하는 기술자의 능력에 따라 큰차이가 있을 수 있는 등 여러 문제점을 안고 있다. 따라서, 본 연구에서는 고밀도레이저 측량기법인 3D Laser Scanning을 이용하여 터널의 천단침하및 내공변위를 기존의 Total Station 측량기법보다 더 경제적이고 정밀하며, 신속하게 측정할 수 있는 기법을 제시하므로서 3D Laser Scanning을 이용한 터널계측의 발전과 향후 무인 자동 계측시스템의 개발에 이바지 하고자 하는데 그 목적이 있다.

• 한국건축시공학회지
• /
• 제16권6호
• /
• pp.579-585
• /
• 2016

3차원 이미지 스캐닝 기술은 복잡한 비정형 건축물의 외피의 정확한 형상과 위치 데이터를 확보하는데 효과적이다. 3차원 이미지 스캐닝 기술의 세부 과정인 점 군집화, 메쉬표면 분리, 넙스 표면 생성, 파라메트릭 솔리드 모델을 통하여 비정형 건축물의 형상을 구축할 수 있다. 이에 본 연구는 비정형 건축물의 외장재 제작과 시공을 위한 3차원 이미지 스캐닝에 의한 역설계 프로세스와 사례 분석을 통하여 시사점을 도출한다. 본 연구의 결과는 역설계 기술을 사용한 3차원 형상 기술과 설계 요소화 방법을 다양한 건설 프로젝트에 활용할 수 있을 것으로 판단된다.

• 대한기계학회논문집A
• /
• 제33권7호
• /
• pp.681-686
• /
• 2009

Direct laser metal forming technology was applied to restore the damaged mold surface. In order to estimate melting characteristics of the $20{\mu}m$ Fe-Cr-Ni powder, single layer experiments were performed at various levels of heat input. The process window of the $20{\mu}m$ Fe-Cr-Ni powder provided feasible process parameters for the smooth regular surface. The cross hatching scanning strategy on the multiple layer experiment was performed to reduce the thickness non-uniformity of edge portions compared with the one direction scanning. To estimate the coherence between the melted powder and the basematal, the tendency of hardness distribution has been observed. The hardness of the melted and the remelted zone was distributed from 400HV to 600HV. It is over 2 times compared of the hardness of the basemetal. Experimental results show that the mold restoring process using direct laser metal forming can be successfully applied in the mold repair industry.