• Current Optics and Photonics
• /
• v.4 no.1
• /
• pp.23-30
• /
• 2020

This paper presents a new method for designing a lens system stable against chromatic variation at a specified wavelength. Conventional lenses are corrected for chromatic aberration, but the new method suppresses chromatic changes of the marginal ray in the image-side. By doing so, paraxial properties of the lens system are stabilized against chromatic variation. Since the new method is based on paraxial ray tracing, the stabilizing conditions against chromatic variation are given by recurrence formulas. However, there is an analytic solution for the case of a cemented doublet in the air. A stable doublet at 405 nm wavelength is designed and analyzed.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.9
• /
• pp.173-179
• /
• 2003

In optical storage device system, there are several research topics to increase its recording density. The main idea is reducing wave length of laser diode and magnifying the number of numerical aperture (NA). In conventional optical system NA cannot be over the unity in the air because of its diffraction limit. But it is possible to overcome its limitation of unity in near field using Solid Immersion Lens. In this work, the mathematical Solid Immersion Lens (SIL) design process was illustrated by using near field theory. Also, numerical SIL design parameters were calculated by means of CODE V. Through the work, we propose the new type of SIL for high density optical recording systems.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.04a
• /
• pp.43-47
• /
• 1992

물체공간의 한점에서 출발하여 광학계에 입사한 광속은 전부 상공간의 한점에서 집속되고 물체공간의 점 과 상공간의 점은 1:1로 대응해야 하나 현실의 광학계는 필히 수차가 존재하기때문에 이상 결상을 맺지 못다. 이러한 원인으로 생기는 수차를 통상의 방법으로 제거 할 수 없을때 비구면 LENS를 사용한다. 비구 면 LENS는 축대칭성을 갖고 단면형상이 다항식으로 표현되는 곡면을 갖는 LENS로 종래의 구면체로 구성 된 광학계에서 보정될 수 없었던 수차를 근본적으로 제거한다. 또한 비구면 LENS를 사용하므로써 화질 의 향상을 기할 수 있고 LENS 매수를 줄임으로써 LENS계 전체의 COMPACT 화, COST DOWN, 중량경감이 가능한 잇점이 있다. 지금까지 이러한 장점이 있는 비구면 LENS가 사용되지 못했던 것은 설계기술보다는 생산기 술에 있었는데, 최근 비구면 LENS 가공이가능한 기계와 LASER를 이용한 측정기술, MOLD MASTER에 의한 사출기술이 발전함에따라 PLASTIC LENS의 양산이 가능하게 되었다. 본 고에서는 신 제품 개발능력 확보와 제품경쟁력 향상을 목적으로 개발한 비구면 LENS 금형의 초정밀가공 정도 (비구면 가공정도 : FORM ERROR 0.2 .mu. m 이하) 달성방법과 측정평가에 대해 논했다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.2
• /
• pp.13-19
• /
• 2012

Ultra Precision Machining Techniques, such as manufacturing Micro Lens Array(MLA), off-axis mirror, $F-{\theta}$ lens for laser printer, are achieved, based on technologies in consequence of development of modern high-precision machining mechanism. Above all, FTS(Fast Tool Servo) and STS(Slow Tool Servo) are more innovative technologies for reducing time and development costs. In this paper, it is described that MLA machining technique by FTS, off-axis mirror machining technique by STS, optics for observing space, and development of infrared aspheric lens for a thermal imaging microscope.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.7
• /
• pp.98-103
• /
• 1998

Recently, DVD/CD compatible driver is needed for DVD and CD is widely used as a new optical data restoring device. The optical systems of DVD and CD driver are different because they have different optical feature. If only one objective lens is used, the change of an aperture or a dual focal length of the lens is required. This method, however, increases the number of parts and results in loss of the power of laser light. Hence, we propose a dual lens actuator design that can read DVD and CD respectively. Albeit magnetic spring is important mechanism in the dual lens actuator design, there has not been the systematic approach to design the mechanism in the preceding researches. In this article. the guideway to design magnetic spring is presented by using the qualitative theoretical approach and the finite element analysis.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.914-917
• /
• 2002

Fabrication of micro carbon structures and patterns using laser-assisted chemical vapor deposition is studied. Argon ion laser and ethylene were used to grow micro carbon rod through pyrolytic decomposition of the reaction gas. The influence of reaction gas pressure and incident laser power on the diameter and growth rate of the micro carbon rod was experimentally investigated. The diameter of micro carbon rods increases linearly with respect to the laser power but is almost independent of the reaction gas pressure. Growth rate of the rod changes little with gas pressure when the laser power remains below 1W. When the carbon rod was grown at near threshold laser power, a very smooth surface is obtained on the rod. By continuously moving the focusing lens in the direction of growth, a micro carbon rod with a diameter of 28 ${\mu}{\textrm}{m}$ and aspect ratio of 100 was fabricated.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.4
• /
• pp.43-48
• /
• 2015

A focal length-correcting lens called the F-theta lens is required to compensate for the different focus on spot size due to the deflected incident laser beam. The F-theta lens was designed by the ray tracing method and fabricated by a 3D printer with polymer-based material. The designed F-theta lens is able to compensate for the focus on spot size by an incidence angle of 0 to 2 degrees. Based on the analysis of the simulation, there was almost no aberration in the $0^{\circ}C$ incidence angle, and the maximum of $50{\mu}m$ of aberration was observed at the incidence angle of $2^{\circ}$. Diffraction-encircled energy was analyzed to characterize the designed optics, and an image simulation was performed to confirm the actual image resolution.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.3
• /
• pp.579-583
• /
• 2012

We have designed the small particle detection system. The scatteing effect of light was used to detect small particle. The fabricated system consisted of laser diode, lens, pin hole, and photo detector. The aperture, lens, and photo detector were optimized to improve the performance of detection system. The fabricated detection system detected the scattered light by small particle entering into detection system and its response time was fast.

• Korean Journal of Optics and Photonics
• /
• v.28 no.2
• /
• pp.68-74
• /
• 2017

To minimize chromatic variations across a wavelength band, we suggest a new design that corrects the first- and second-order wavelength derivatives of the refractive power. Based on this method, a diffraction-limited collimator is designed. The design is very stable against wavelength change, as expected. The chromatic change of the effective focal length is less than 0.002% in the wavelength range from 360 to 410 nm.

• Korean Journal of Optics and Photonics
• /
• v.12 no.6
• /
• pp.496-502
• /
• 2001

We generated a nondiffracting beam and investigated its intensity profile on propagation. We first obtained an annular output beam from Nd:YAG laser with a negative branch unstable ring resonator and, using a 1m focal length lens, we generated a Bessel- Gauss beam. The inner radius of the annular output beam was 2.57 mm and the ring width was 0.145 mm. The intensity profile of the nondiffracting beam did not show any appreciable diffraction up to 33 m distance from the focal lens. This result was compared with the theory.