• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.9
• /
• pp.669-676
• /
• 2013

In this study, we introduce a polymer(polyimide) based pressure sensor to measure real-time heart beat and blood pressure. The sensor have been designed with consideration of skin compatibility of material, cost effectiveness, manufacturability and wireless detection. The designed sensor was composed of inductor coils and an air-gap capacitor which generate self-resonant frequency when electrical source is applied on the system. The sensor was obtained with metalization, etching, photolithography, polymer adhesive bonding and laser cutting. The fabricated sensor was shaped in circular type with 10mm diameter and 0.45 mm thickness to fit radial artery. Resonant frequencies of the fabricated sensors were in the range of 91~96 MHz on 760 mmHg pressurized environment. Also the sensor has good linearity without any pressure-frequency hysteresis. Sensitivity of the sensor was 145.5 kHz/mmHg and accuracy was less than 2 mmHg. Real-time heart beat measurement was executed with a developed hand-held measurement system. Possibility of real-time blood pressure measurement was showed with simulated artery system. After installation of the sensor on skin above radial artery, simple real blood pressure measurement was performed with 64 mmHg blood pressure variation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1869-1872
• /
• 2003

As SLA(Sterealithography), SLS(Selective Laser Sintering), LOM(Laminated Object Manufacturing), FDM(Fused Deposition Modeling) etc. The FDM system the heart of a study and is developed by Stratasys co. ltd, in US., is small and cheap R.P. The material filament is heated until the material reaches a near-liquid state, it is pumped through a nozzle and become hand with a shape required, and this nozzle move pumping on the previously deposited material. Such FDM system that choice deposition type with X-Y plouter obtain in the thin continue layer by decreasing amount of extrusion or to central the injection amount when the head slow down at the corner, but in the process that fusion wax or resin become hand, deformation occur and it will affect the shape accuracy and the surface roughness. Such effect will depreciate quality and reliability of the product. Therefore, when the product made in actuality, the fundamental study on the basis geometry(surface, volume, line, angle) must be preceded and it have been research by many Free Form Fabrication. So, this basic object study purpose to obtain the fundamental geometry data and to enhance the surface roughness of the shape. And an operant can use the data for the progress of the surface roughness. This study research the estimation and application of the prototype surface roughness by adjustment the injection amount. And basie of this research, describe the pattern of prototype surface roughness and also used the result to estimate the surface of prototype.

• Korean Journal of Optics and Photonics
• /
• v.28 no.2
• /
• pp.75-82
• /
• 2017

We present a new type of receiver-transmitter optical system that can be adapted to the sensor head of a displacement-measuring interferometer. The interferometer is utilized to control positioning error and repetition accuracy of a wafer, down to the order of 1 nm, in a semiconductor manufacturing process. Currently, according to the tendency of scale-up of wafers, an interferometer is demanded to measure a wider range of displacement. To solve this technical problem, we suggest a new type of receiver-transmitter optical system consisting of a GRIN lens-Collimating lens-Afocal lens system, compared to conventional receiver-transmitter using a single collimating lens. By adapting this new technological optical structure, we can improve coupling efficiency up to about 100 times that of a single conventional collimating lens.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.1
• /
• pp.47-52
• /
• 2008

The visual implementation of 3-dimensional national environment is focused by the requirement and importance in the fields such as, urban planing, telecommunication facility deployment plan, railway construction, construction engineering, spatial city development, safety and disaster prevention engineering. The currently used DEM system based on the 2-D digital maps and contour lines has limitation in implementation in reproducing the 3-D spatial city. Currently, the LiDAR data which combines the laser and GPS skill has been introduced to obtain high resolution accuracy in the altitude measurement in the advanced country. In this paper, we first introduce the LiDAR based researches in advanced foreign countries, then we propose the data generation scheme and an solution algorithm for the optimal management of our 3-D spatial u-City construction. For this purpose, LiDAR based height data transformed to DEM, and the realtime unification of the vector via digital image mapping and raster via exactness evaluation is transformed to make it possible to trace the model of generated 3-dimensional model with long distance for 3D u-city model generation.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.14
• /
• pp.5779-5785
• /
• 2015

The present study was designed to investigate cholangiocarcinoma (CCA) antibodies in hamster serum. Hamster CCA cell lines were processed using sodium dodecyl sulfate-polyacrylamide gel electrophoresis and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. A candidate biomarker was confirmed by immunoprecipitation and western blot, and was further analyzed using ELISA and sera from normal control hamsters, hamsters with opisthorchiasis and hamsters with various stages of CCA, as well as from CCA patients and healthy individuals. One candidate marker was identified as $HSP90{\alpha}$, as indicated by a high level of anti-$HSP90{\alpha}$ in hamster CCA sera. It was found that the levels of anti-$HSP90{\alpha}$ were specifically elevated in the sera of hamsters with CCA compared with other groups and progressively increased with the clinical stage. At the cut-off point of 0.4850 on the receiver operating characteristic curve, anti-$HSP90{\alpha}$ could discriminate CCA from healthy control groups with a sensitivity of 76.2%, specificity of 71.4% and total accuracy 75.5%. In the present study, we have shown that anti-$HSP90{\alpha}$ may be a potential useful serum biomarker to discriminate CCA cases from healthy persons.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.1
• /
• pp.3-12
• /
• 2012

It is a global trend to give attention to generating precise 3D navigation maps since eco-friendly vehicles have become a critical issue due to environmental protection and depletion of fossil fuels. To date, Mobile Mapping System (MMS) has been a efficient method to acquire the data for generating the 3D navigation maps. To achieve this goal so far in the Mobile Mapping System using the data acquisition method has been proposed to be most effective. For this study the basic RTF filter algorithm was applied to modify to fit MMS quantitative analysis derived floor 99.71%, 99.95% of the highly non-producers to maintain accuracy and high-precision 3D road could create DEM. In addition, the roads that exist within the cars, roadside tree, road cars, such as the median strips have been removed to shields it takes to get results effectively, and effective in practical applications and can be expected to improve operational efficiency is considered.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.6
• /
• pp.94-103
• /
• 2001

The goal of using numerical methods in this study is two-fold: to replicate a set of measured, individualized HRTFs by a computer simulation, and also to visualise the resultant sound field around the head. Two methods can be wed: the Boundary Element Method (BEM) and the Infinite-Finite Element Method (IFEM). This paper presents the results of a preliminary study carried out on a KEMAR dummy-head, the geometry of which was captured with a high accuracy 3-D laser scanner and digitiser. The scanned computer model was converted to a few valid BEM and IFEM meshes with different polygon resolutions, enabling us to optimise the simulation for different frequency ranges. The results show a good agreement between simulations and measurements of the sound pressure at the blocked ear-canal of the dummy-head. The principle of reciprocity provides an effect method to simulate HRTF database. The BEM was also used to investigate the total sound field around the head, providing a tool to visualise the sound field for different arrangements of virtual acoustic imaging systems.

• Journal of Advanced Navigation Technology
• /
• v.23 no.6
• /
• pp.495-500
• /
• 2019

Foreign object debris (FOD) is a generic term for various metals and non-metal foreign object and materials with potential hazards to aircraft operations. Since the method of manual FOD detection and collection in the aircraft moving area is very low in efficiency and economic efficiency, it is essential to develop to FOD automatic detection system suitable for domestic environment. This paper is the result of the performance comparison test results of the two systems for the combined operation of each optimal detection time and 95% accuracy above 100 m for complex operation using the fixed FOD automatic detection system and the mobile FOD system using EO/IR camera and radar at Taean Airfield Hanseo University. It is expected that FOD can be performed unattended through continuous R & D.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.3
• /
• pp.315-327
• /
• 2017

In this paper, we present a method for estimating of position and velocity of a moving target by using the range and the bearing measurements from multiple sensors of aiming unit. In many cases, conventional low cost gyro sensor and a portable laser range finder(LRF) degrade the accuracy of estimation. To enhance these problems, we propose two methods. The first is background image tracking and the other is principal component analysis (PCA). The background tracking is used to assist the low cost gyro censor. And the PCA is used to cope with the problems of a portable LRF. In this paper, we prove that our method is robust with respect to low-frequency, biased and noisy inputs. We also present a comparison between our method and the extended Kalman filter(EKF).

• Journal of Korean Society of Forest Science
• /
• v.96 no.3
• /
• pp.251-258
• /
• 2007

Airborne Lidar (light detection and ranging) can be an effective alternative in forest inventory to overcome the limitations of conventional field survey and aerial photo interpretation. In this study, we attempt to develop methodologies to identify individual trees and to estimate tree height from airborne Lidar data. Initially, digital elevation model (DEM) data representing the exact ground surface were generated by removing non-ground returns from the multiple-return laser point clouds, obtained over the coniferous forest site of rugged terrain. Based on the canopy height model (CHM) data representing non-ground layer, individual tree heights are extracted through pseudo-grid method and moving window filtering algorithm. Comparing with field survey data and aerial photo interpretation on sample plots, the number of trees extracted from Lidar data show over 90% accuracy and tree heights were underestimated within 1.1m in average at two plantation stands of pine (Pinus koraiensis) and larch (Larix leptolepis).