• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.938-941
• /
• 2003

As the application area of range finder initially developed for military purpose has been extended, the necessity of precision measurement for long distance and its miniaturization is being presented. Recently, LRF(Laser Range Finder) is widely used because it shows more accurate results of range finding. However, most of LRFs use laser source which have wavelength ranges harmful to the human eyes. In this study, we developed the LRF using OPO(Optical Parametric Oscillator) which can stretch laser wavelength to safe region and realized more compact one using solid state laser

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.4
• /
• pp.152-159
• /
• 2007

In this paper, a new design technique on the LRF which is useful for low power laser and a CBDA(Cummulative Binary Detection Algorithm) is proposed. The LD(Laser Diode) and Si-APD(Silicon Avalanche Photo Diode) are used for saving a power. In order to prove the detection range, the Si-APD binary data are accumulated before the range computation and the range finding algorithm. A prototype of the proposed DLRF(Diode Laser Range Finder) system was made and tested. An experimental result shows that the DLRF system have the same detection range using a less power(almost 1/32) than an usual military LRF. The proposed DLRF can be applied to the Unmanned Vehicles, Robot and Future Combat System of a tiny size and a low power LRF.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.1
• /
• pp.62-68
• /
• 2012

In this paper, a detection method of a pedestrian safety road marking was proposed. The proposed algorithm uses laser range and reflectivity of a range finder (LRF). For a detection of crosswalk marking and stop line, the DFT (Discrete Fourier Transform) of reflectivity and cross-correlation method between the reference replica and the measured reflectivity are used. A speed bump is detected through measuring an altitude difference of two LRFs which have the different tilted angle. Furthermore, we proposed a velocity constrained a detection method of a speed bump. Finally, the proposed methods are tested in on-line, on the pavement of a road. The considered road markings are wholly detected. The localization errors of both road markings are smaller than 0.4 meter.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.6
• /
• pp.530-542
• /
• 2005

We proposed a robust localization algorithm for mobile robots using LRF. A novel cost function for localization is suggested, which was used for calculating correct rotation angle and translation vector. We examined validity of our algorithm with various simulations and experiments, and also revealed robustness and accuracy compared to previous localization algorithms.

• The Journal of Korea Robotics Society
• /
• v.4 no.4
• /
• pp.298-304
• /
• 2009

This paper describes an algorithm that improves 3D reconstruction result using a multi-sensor fusion disparity map. We can project LRF (Laser Range Finder) 3D points onto image pixel coordinatesusing extrinsic calibration matrixes of a camera-LRF (${\Phi}$, ${\Delta}$) and a camera calibration matrix (K). The LRF disparity map can be generated by interpolating projected LRF points. In the stereo reconstruction, we can compensate invalid points caused by repeated pattern and textureless region using the LRF disparity map. The result disparity map of compensation process is the multi-sensor fusion disparity map. We can refine the multi-sensor 3D reconstruction based on stereo vision and LRF using the multi-sensor fusion disparity map. The refinement algorithm of multi-sensor based 3D reconstruction is specified in four subsections dealing with virtual LRF stereo image generation, LRF disparity map generation, multi-sensor fusion disparity map generation, and 3D reconstruction process. It has been tested by synchronized stereo image pair and LRF 3D scan data.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.659-660
• /
• 2008

• Journal of the Optical Society of Korea
• /
• v.19 no.1
• /
• pp.1-6
• /
• 2015

We investigate the propagation characteristics of a pulse laser in a time-of-flight laser range finder (TOF-LRF) system with variations in atmospheric conditions, such as temperature, pressure, relative humidity, and the concentration of $CO_2$. The measurement error of distance related with the group velocity change in the TOF-LRF system is analyzed by considering the refractive index of the standard atmosphere with variations in atmospheric conditions. The dependence of the pulse width broadening induced by chromatic dispersion of the standard atmosphere on the operating wavelength and the initial pulse width of the light sources is discussed. The transmission of air with variations in the relative humidity or the concentration of $CO_2$ is analyzed by using different values of absorption coefficients depending on the operation wavelength of the light source in the TOF-LRF system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.3
• /
• pp.265-275
• /
• 2015

This paper describes extraction methods of five different types of geometrical features (line, arc, corner, polynomial curve, NURBS curve) from the obtained raw data by using a two-dimensional laser range finder (LRF). Natural features with their covariance matrices play a key role in the realization of feature-based simultaneous localization and mapping (SLAM), which can be used to represent the environment and correct the pose of mobile robot. The covariance matrices of these geometrical features are derived in detail based on the raw sensor data and the uncertainty of LRF. Several comparison are made and discussed to highlight the advantages and drawbacks of each type of geometrical feature. Finally, the extracted features from raw sensor data obtained by using a LRF in an indoor environment are used to validate the proposed extraction methods.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.7
• /
• pp.737-742
• /
• 2013

Recently, unmanned aircrafts for safe measurement in hazardous locations have been developed. In a method of operation of unmanned aircraft vehicles (UAV), there are two methods of manual control and automatic control. Small UAVs are used for low altitude surveillance flights where unknown obstacles can be encountered. Obstacle avoidance is one of the most challenging tasks which the UAV has to perform with high level of accuracy. In this study, we used a laser range finder as an obstacle detector in automatic navigation of unmanned aircraft to patrol the destination automatically. We proposed a system to avoid obstacles automatically by measuring the angle and distance of the obstacle using the laser range finder.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.106-109
• /
• 2004

In this project, we have developed the eye-safe LRF system of 1.54 ${\mu}{\textrm}{m}$ wavelength using OPO. The maximum measured distance was 3.7km in outdoor experiment. We used Nd：YAG (1064nm) as a laser medium. It was applied BBO to construct the system. We also developed a time-counter for the range finder using a method of TOF (time of flight). The counter-clock used at the time counter was 320MHz making resolution within $\pm$1m. Start and stop signals were detected by two channel systems using PIN and APD. The LRF's repetition rate was 4 times per minute. The energy was measured to be over 9mJ. And, pulse-duration was 23ns. Resolution was $\pm$2m at the distance measurement using a target.