• 한국가시화정보학회지
• /
• 제8권3호
• /
• pp.49-55
• /
• 2010

Thermal flows inside a laser printer are affected by generated heat from a fuser and boards. Thus, the effect of fans has been investigated to control the thermal flows and behaviors of toners. In order to analyze the phenomena experimentally, a PIV (Particle Image Velocimetry) has been used, and then the flow inside the printer has been predicted by the CFD (Computational Fluid Dynamics) in this study to determine the efficient flow distribution by an optimum design of the printer. The determined optimum design has been confirmed by the developed PIV technique so that the efficiency of the laser printer can be improved by the proposed design.

• 한국산학기술학회논문지
• /
• 제10권1호
• /
• pp.135-139
• /
• 2009

Laser Printer 현상기 Roller는 시간이 지나면 자기력과 자화 특성이 감소하게 되며 이런 자성체 감소로 인해 인쇄 품질이 떨어진다. 본 연구에서는 재활용에 따른 현상기 롤러의 자성 분포를 조사하여 신제품과 비교 함으로써 재활용의 사용 가능성 및 자성체의 경시 변화에 대해 제한하였다.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2007년도 추계학술발표논문집
• /
• pp.67-70
• /
• 2007

Developer roller of laser printer cartridge made with magnetic substance and density of magnetic flux was decreased with the elapse of a year. Owing to this reason, quality of printing was decreased with decreasing of magnetic flux. This study investigated about the elapse of a year of magnetic substance and possible about usage of recycling production.

• 한국레이저가공학회지
• /
• 제18권3호
• /
• pp.1-5
• /
• 2015

A 3D printer based on laser powder deposition (LPD), also known as DED (direct energy deposition), has been developed for fabricating metal parts. The printer uses a ytterbium fiber laser (1070nm, 1kW) and is equipped with an Ar purge chamber, a three-dimensional translation stage and a powder feeding system composed of a powder chamber and delivery nozzles. To demonstrate the performance of the printer, a tapered cylinder of 320mm in height has been fabricated successfully using Ti-6Al-4V powders. The process parameters including the laser output power, the scan speed, and the powder feeding rate have been optimized. A 3D printed test specimen shows mechanical properties (yield strength, ultimate tensile strength, and elongation) exceeding the criteria to employed in a variety of Ti alloy applications.

• 한국콘텐츠학회논문지
• /
• 제12권12호
• /
• pp.639-646
• /
• 2012

본 논문에서는 HP 컬러 레이저 프린터 기기의 출력물에 나타나는 Yellow Dots의 형태를 분석하고자, 각각 시간의 경과, 연과 월의 경과 그리고 동일한 기종에 따른 Yellow Dots의 특성을 실험하였다. 그 결과, 동일한 프린터기기의 출력물에서는 시간의 경과, 연과 월의 경과에서 나타나는 Yellow Dots의 형태가 동일한 것을 알 수 있었다. HP 컬러 레이저젯 프린터 기기에는 Xerox사에서 출시된 컬러 레이저젯 프린터기기와는 다르게 시간과 날짜 정보가 임베딩 되지 않았다는 것을 가정 할 수 있었다. 또한 시리얼 넘버가 다른 프린터기기에서는 유사하지만 다른 형태의 Yellow Dots가 나타나는 것을 알 수 있었으며, 이것은 프린터기기 구분에 있어 큰 도움이 된다. 마지막으로 실험에 사용된 모든 HP 컬러 레이저 프린터 기기들의 Yellow Dots를 분석한 결과, 동일한 패턴을 찾을 수 있었으며, 그 결과를 통하여 제조사를 파악 할 수 있었다. 향후 Yellow Dots 패턴을 해독하고 나아가 타 제조사의 Yellow Dots를 검출 및 분석하는 연구가 진행되어져야 한다.

• ETRI Journal
• /
• 제9권1호
• /
• pp.165-172
• /
• 1987

본고에서는 컴퓨터의 출력장치로서 최근 가장 인기를 얻고 있는 논-임팩트 레이저 페이지 프린터(non-mpact laser page printer), 즉 레이저 빔 프린터(LBP : Laser Beam Printer)의 성능 및 특성에 관한 고찰과 현재 시판중인 desktop 레이저 빔 프린터를 비교 분석하고 그 응용사례에 대해서 간단히 소개하고자 한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.651-652
• /
• 2008

• 한국입자에어로졸학회지
• /
• 제6권3호
• /
• pp.123-129
• /
• 2010

As the indoor activity increases in recent years, the indoor air quality becomes more important. One of the major contaminants in office space is the copy machines and the laser based printers. These devices usually emit nano-particles and chemical species that may give some health effect. The amount of particles generated by the printers and copy machines depend on printer models, printing speed, toners, papers, humidity and so on. To evaluate the emission rate of nano-particles from Laser Printers, the mass concentration measurement method has been used (BAM, 2004). However, the mass concentration measurement method for nano-particles is tedious and time consuming. Therefore, for the development of a new nano-particle counting method, the nano-particle emission characteristics and size distributions are evaluated.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.189-193
• /
• 2001

The performance of printer can be determined by the printing speed, noise level, printing quality which includes the resolution, regularity of printed matter and etc. Among them, printing quality mostly depends on the irregularity of the line spacing and dot size. The irregular line spacing and dot size in laser beam printer are mainly from the jitter which comes from the vibration of Organic Photo Conductive(OPC) drum and the Laser Scanning Unit(LSU). Jitter due to the vibration of LSU appears as high-frequency component which occurs 100-300$\mu\textrm{m}$ interval in printed matter and the causes of it can be estimated as the vibration of polygon motor, case, reflecting mirror and etc. In this paper, vibration characteristics of the LSU under development are investigated and the strategy for improvement of the dynamic characteristics is established and its validity is demonstrated.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.466-468
• /
• 2005

Recently, the demand for the development of high quality and high speed laser printer and efficient power utilizations are required. Among complicate electro-mechanic devices in laser printer, the toner fusing unit consumes above 90[%] of all electrical energy needed for printing devices. Therefore, the development of more effective energy-saving toner fusing process becomes a significant task of much great demand. Generally, there are several way to implement fusing unit, among them this paper present a new hybrid induction heating method. The proposed induction heating method enables to increase coupling coefficient between heating coil and heat roller also to Increase total energy transfer efficiency. Therefore the proposed IH inverter system provide very fast W.U.T.(Warm UP Time), also high efficiency. Through experimental result, the proposed control system is verified.