• 제목/요약/키워드: Laser 905 nm

검색결과 7건 처리시간 0.027초

레이저침에 활용되는 830 nm, 905 nm 레이저의 안전성 연구 (A Study on Safety of 830 nm, 905 nm Laser Used for Laser Acupuncture Therapy)

  • 유평식;김영선;문영민;이석희;정성호;윤대환;최찬헌;나창수
    • Korean Journal of Acupuncture
    • /
    • 제29권3호
    • /
    • pp.441-452
    • /
    • 2012
  • Objectives : As the attempts to make good uses of laser acupuncture in korean medicine have been steadily carried on, to ensure the safety is needed to increase the use of laser acupuncture. The aim of this study was to examine the safety of using laser acupuncture therapy irradiated with 830 nm laser and 905 nm laser. Methods : Fifteen rats were randomly divided into three experimental groups - Intact ; no therapy group. LAT830 ; laser acupuncture therapy(830 nm) group at GB34 GB39. LAT905 ; laser acupuncture therapy(905 nm) group at GB34 GB39. During eight weeks of treatment, LAT830, LAT905 were treated 2 times weekly, frequency 20 Hz, intensity 20 mW. Test items were mortality, body weight, food consumptions, hematological values, blood chemical values, urinalysis values, absolute organ weights and relative organ weights. Results : Statistically significant differences were not found among 3 groups. The values measured in LAT830, LAT905 and Intact(no therapy) group have shown similar results and it indicated that LAT830, LAT905 had no abnormal influence on the reaction of living bodies. There was little difference on the liver weight of relative organ weight test between laser-treated groups(LAT830, LAT905) and Intact group. Conclusions : In conclusion, laser acupuncture therapies irradiated with 830 nm laser and 905 nm laser caused no abnormal reaction of living bodies. More studies are needed to further establish the safety of many other laser acupuncture therapies.

Ta2O5/SiO2를 이용한 고출력 광섬유 레이저의 펌프 LD 보호기용 반사형 필터 설계 및 제작 (Design and Fabrication of Reflection-type Pump LD Protection Filters for High Power Fiber Lasers by Using Ta2O5/SiO2 Thin Films)

  • 성하민;김재헌;이석;전영민
    • 한국광학회지
    • /
    • 제23권3호
    • /
    • pp.124-127
    • /
    • 2012
  • 본 논문에서는 고출력 광섬유 레이저에서 역입사되는 레이저 광으로부터 펌프 LD를 보호하기 위한 반사형 2색 필터를 설계하고 제작하였다. 펌프 LD 발진 파장인 905 nm~925 nm 대역에서 투과율은 0.1%이하, 광섬유 레이저 출력 반사광이나 브릴루앙 산란광 파장대역인 1020 nm~1100 nm 대역에서 투과율은 99.9% 이상이 되도록 필터를 설계하였다. 기판(Substrate)은 $SiO_2$로 사용하고 접착력이 우수한 Oxide 계열 물질인 $SiO_2/Ta_2O_5$를 박막 재료로 사용하였다. 최적화된 설계를 한 후 필터를 제작하였고, 그 특성을 비교하였다. 제작된 필터의 투과율이 905 nm ~ 925 nm 대역에선 0.1%이하, 1020 nm~1100 nm 대역에선 95.5%이상으로 측정되어 공정오차를 고려한 설계범위 안에 들어옴을 확인하였다. 제작된 필터는 레이저 출력 1W이상의 입력광에 대해서도 정상 동작함을 확인하였다.

905nm 펄스 레이저를 이용한 시정계 센서 (A Visibility Sensor using a 905nm Pulsed Mode Laser)

  • 김광웅;전호경;송동혁;박정호
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 2002년도 하계학술발표회
    • /
    • pp.210-211
    • /
    • 2002
  • 산업의 발전과 급속한 대도시화는 환경오염이라는 새로운 사회적 이슈를 발생시켰다. 시정(Visual Range)이란 대기의 혼탁도를 나타내는 기상요소로서, 정상적인 시각을 가진 사람이 목표를 식별할 수 있는 최대거리를 의미한다 시정은 대기오염을 판단할 수 있는 척도이며, 항만 및 공항 등에서는 인명 및 재산과 직접적인 관계를 갖고 있어, 최근 시정 측정에 대한 중요성이 높아지고 있다. 본 논문에서는 배경 잡음에 좋은 특성을 가지며, 보디- 정확한 시정 측정을 위하여 905nm 펄스 모드 반도체 레이저 다이오드를 이용한 시정계 센서를 제작하여 실험하였다. (중략)

  • PDF

Spectroscopic Study of the Ã1A" - X~1A' System of CHBr

  • Shin, Seung-Keun;Park, Seung-Min
    • Bulletin of the Korean Chemical Society
    • /
    • 제32권3호
    • /
    • pp.905-908
    • /
    • 2011
  • We report fluorescence excitation and emission spectra of the CHBr molecule generated via pyrolysis of $CH_3Br$ in a molecular beam experiment. The 193 nm attenuation cross sections were estimated from the reduction of the CHBr signal as a function of the excimer laser fluence. The derived 193 nm absorption cross section for CHBr [$(3.24{\pm}0.59){\times}10^{-17}\;cm^2$] is slightly higher than the absorption cross section previously determined for CHCl [$(2.6{\pm}0.8){\times}10^{-17}\;cm^2$], but the difference is within the estimated uncertainties in the measured cross section.

실시간 경계를 위한 라이다 데이터 처리의 가속화 방법 (An Acceleration Method for Processing LiDAR Data for Real-time Perimeter Facilities)

  • 이윤임;이은석;노희전;이성현;김영철
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2022년도 춘계학술대회
    • /
    • pp.101-103
    • /
    • 2022
  • 중요시설 실시간 감지 시스템으로는 주로 CCTV를 사용하고 있다. CCTV의 경우 감지에 대한 정확성은 높지만 시야각이 좁기 때문에 레이다(RADAR)와 같은 센서와 함께 혼용되어 사용되고 있다. 라이다(LiDAR)는 고출력의 펄스 레이저를 이용하여 물체에 반사되어 돌아오는 시간을 감지하여 거리정보를 획득하는 기술이다. 라이다의 경우 데이터 처리량으로 인해 서버의 동시 처리 센서 개수의 제약으로 인해 비용적으로나 기술적으로나 활용도가 높지 않은 문제점이 있다. 광망 센서에 의한 감지 방식 또한 강풍과 혹한에 취약하고 동물 훼손에 따른 유지보수의 문제도 있다. 본 논문에서는 기존의 라이다 센서에서 사용하는 905nm 파장대가 아닌 1550nm 파장대를 사용함으로써 기상 환경에 대한 영향은 강하고, 다수의 센서를 통합하여 관제할 수 있는 시스템 개발을 제안하고자 한다.

  • PDF

헬륨 가스 플로우와 가스 펄스 젯에서 할로겐족 원소들의 레이저유도 플라즈마 방출 스펙트럼 (Laser-induced plasma emission spectra of halogens in the helium gas flow and pulsed jet)

  • 이용훈;최대웅;공용득;남상호;나창운
    • 분석과학
    • /
    • 제26권4호
    • /
    • pp.235-244
    • /
    • 2013
  • 할로겐족 원소들의 강한 원자 방출선들은 진공자외선 영역에 존재하여, 공기 중에서 레이저 펄스를 시료에 집속하여 플라즈마 방출 스펙트럼을 얻어 원소 분석을 수행하기 매우 어렵다. 또한 근적외선 영역에 할로겐족 원소들의 들뜬 전자 상태들 사이의 전이에 의한 원자 방출선들이 존재하는데, 이들은 스타크 효과에 의한 선폭 넓어짐 현상이 매우 커서, 공기 중에서 원소 분석에 충분한 신호 대 잡음비를 얻기 어렵다. 헬륨 가스 플로우를 이용하여 근적외선 영역의 할로겐족 원소들의 원자 방출선들은 레이저유도 플라즈마로부터 관측하였다. 특히, 804.374 nm와 905.833 nm의 아이오딘 원자 방출선들은 레이저유도 플라즈마에서 처음으로 관찰된 것이다. 헬륨 분위기에서 스타크 효과에 의한 선폭 넓어짐 현상과 연속 배경복사의 세기는 현저히 억제되었다. 헬륨 가스 플로우의 유량에 따른 원자 방출선의 세기, 플라즈마 온도, 전자 밀도의 변화를 조사하였다. 이 방법을 이용하여 고무의 난연제 성분에 포함된 염소와 불소를 레이저유도 플라즈마 분광법을 이용하여 검출하였다. 마지막으로 레이저유도 플라즈마 분광법을 이용하여 할로젠 원소들을 검출하는데 헬륨 가스 소모량을 줄일 수 있는 가스 펄스 젯 장치를 제안한다.

Compact Infrared/Visible Laser Transmitter Featuring an Extended Detectable Trajectory

  • Kim, Haeng-In;Lee, Hong-Shik;Lee, Sang-Shin
    • Journal of the Optical Society of Korea
    • /
    • 제16권4호
    • /
    • pp.331-335
    • /
    • 2012
  • A miniaturized laser beam transmitter, in which a visible laser module at ${\lambda}$=650 nm is precisely stacked upon an infrared (IR) module at ${\lambda}$=905 nm, has been proposed and constructed to provide an IR collimated beam in conjunction with a collinear monitoring visible beam. In particular, the IR beam is selectively dispersed through a perforated sheet diffuser, so as to create a rapidly diverging close-range beam in addition to a highly defined long-range beam simultaneously. The complementary close-range beam plays a role in mitigating the blind region in the vicinity of the transmitter, which is inevitably missed by the main long-range beam, thereby uniformly extending the transmitter's effective trajectory that is sensed by a receiver. The proposed transmitter was designed through numerical simulations and then fabricated by incorporating a diffuser sheet, perforated with an aperture of 2 mm. For the manufactured transmitter, the IR long-range beam was observed to have divergences of ~2.3 and 1.6 mrad in the fast and slow axes, respectively, while the short-range beam yielded a divergence of ~24 mrad. The angular alignment between the long-range IR and visible beams was as accurate as ~0.5 mrad. According to an outdoor feasibility test involving a receiver, the combination of the IR long- and short-range beams was proven to achieve a nearly uniform trajectory over a distance ranging up to ~600 m, with an average detectable cross-section of ${\sim}60{\times}80cm^2$.