• Korean Journal of Ichthyology
• /
• v.13 no.3
• /
• pp.173-180
• /
• 2001

The fertilized eggs of Hyporhampus sajori (Temminck et Schlegel) were collected on the shore of Youngil Bay, Phohang-shi, Korea, on May 27, 1991, and were hatched and reared in the laboratory to investigate osteological development of larvae and juveniles. The newly hatched larvae were 7.00~8.50 mm (mean 7.80 mm, n = 5) in total length (TL) and had an ossified cranium, visceral skeleton and shoulder girdle bones. At 8 days, the larvae had attained 10.07~14.75 mm (mean 13.07 mm, n = 5) in TL had elongated dentaries anteriorly, and their vertebral columns were posteriory ossified. At 14 days, the larvae had attained 17.62~19.35 mm (mean 19.20 mm, n = 5) in TL, had ossified pterygiophores, and 41 slender ribs on the vertbrae. At 16 days, the larvae were 18.90~24.72 mm (mean 23.00 mm, n = 5) in TL and had three ossified epurals. Ossification of the jaw bone and operculum of the newly hatched larvae, which was related to feeding and respiration was almost completed 37 days after hatching.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.38 no.5
• /
• pp.298-303
• /
• 2005

This study described the reproductive behavior and the morphological development of the larvae and juvenile of the hedgehog seahorse (Hippocampus spinosissimus). Larvae released from male seahorse were reared for 30 days in the laboratory. At the birth, the small flap-like mouth and anus of the yolk-sac larvae were open, and the yolk was completely absorbed within 1 day. The size of newborn larvae ranged 7.01-13.19mm (mean $9.26\pm1.9mm$, n=9) in TL (total length). The larvae had 15-16 pectoral fin rays and 19 dorsal fin rays, but 4 anal fin rays were not completely developed. The larval size ranged 13.38-14.38 mm (mean $13.96\pm0.3mm$, n=6) in TL at 1 day after release, and they had 17 pectoral fin rays, 20 dorsal fin rays and 4 anal fin rays when the larvae reached the juvenile stage. Juvenile size ranged 14.98-16.42mm (mean $15.84\pm0.5mm$, n=5) in TL at 3 days after release, and 1, 4, 6, 8 trunk spines extended quickly. Terminal part of the coronet became a four-forked wedge shape concurrently. Juvenile became 23.25mm (n=l) in TL after 15 days and all 11 trunk rings was connected completely. After 20 days, the juveniles were 24.66-28.65mm (mean $27.26\pm1.6mm$, n=5) in TL, and many melanophores appeared in integument. In the eye lenses, 5-6 lusters were formed. After 30 days, the juveniles were 26.78-28.26 mm (mean $27.36\pm0mm$, n=4)in TL and 8-9 lusters appeared on the eye lenses. Coronet terminal part developed to a five-forked crown-shape completely.

• Korean Journal of Ichthyology
• /
• v.33 no.3
• /
• pp.167-176
• /
• 2021

This study was carried out to clarify the egg, larvae and juveniles development of Abbottina springeri. For the experiments, the matured adults were collected at the Seowon-cheon, Dangjin-si, Chungcheongnam-do, in Korea. The amount of spawning of female A. springeri was about 1,225~2,100 (1,662±437, n=10). The fertilized eggs were circular in shape and 1.05~1.13 (1.08±0.02, n=30) mm in diameter. The hatching time was required 72 hours to 80 hours after fertilization under water temperature of 22℃. The newly hatched larvae were 2.10~2.23 (2.16±0.04, n=10) mm in total length and had egg yolk in the abdomen but the mouth was not opened. At 5 days after hatching, the preflexion larvae were 3.19~3.30 (3.24±0.03, n=10) mm in total length and the most of yolk-sac was absorbed. At the 15 days after hatching, the flexion larvae were 4.97~5.30 (5.13±0.12, n=10) mm in total length and the tip of the caudal fin was began to bend upward. At the 25 days after hatching, the postflexion larvae were 8.97~9.60 (9.44±0.16, n=10) mm in total length and the tip of the caudal fin was bent at 45°. At the 35 days after hatching, the juvenile were 12.0~13.5 (12.7±0.53, n=10) mm in total length and all fin-rays (iii7 dorsal fin, iii6 anal fin, i7 ventral fins) were reached a constant number of each part.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.3
• /
• pp.324-330
• /
• 2023

We investigated the relative growth and squamation of larvae and juveniles of cultured Larimichthys polyactis. Analysis of the relative growth of larvae and juveniles showed that their preanal length, head length, eye diameter, body depth, and snout length increased with growth. There was no significant chage in the relative growth. The ratio of preanus length to standard length (SL) increased rapidly until SL was approximately 12 mm, and then increased gradually. Cycloid scales first appeared on the lateral line, progressed to the abdominal cavity at 15.13 mm SL, and expanded to the occipital region, base of pectoral fin, and ventral region of the eye at 17.82 mm SL. At 18.03 mm SL, scales formed on the cheek, and those at the base of pectoral fin and in the abdominal cavity were connected to each other. At 19.06 mm SL, major part of the head was covered by scales, except near the lower jaw. Cycloid scales on the lateral line changed to ctenoid scales at the range of 31.71-32.24 mm SL, and those on the nape changed at the range of 69.02-70.84 mm SL. Our results may help to establish conservation and management strategy for Larimichthys polyactis aquaculture.

• Proceedings of the Korean Aquaculture Society Conference
• /
• 2003.10a
• /
• pp.93-94
• /
• 2003

To investigate the food organisms of the Acentrogobius elongata during the juveniles stage, the stomach contents of fish, captured in the intertidal zone of Chungchongnam-do Sochon-gun Su-myon Dodun-ri between on early in June from the end of May 2000, were observed. Total length of the fingerings of A. elongata was 1.0~3.0cm size, and the participation rate of feeding was 68.6%. Main food organisms were such as copepods, shrimp larvae, polychaete larvae, and these occupied more than dry weight 4%. Copepods among them dominated the most quantitys by average 64.6%, and food organismsms appeared by order of polychaete larvae and shrimp larvae etc.. Therefore, most important food organisms of fingerlings stage of A. elongata were copepods, polychaete larvae, shrimp larvae etc.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.53 no.1
• /
• pp.132-138
• /
• 2020

Marphysa sanguinea is the most well-known polychaete species with a high economic value. However, this species has a high mortality in the early rearing stage of aquaculture. This study was conducted to find out the optimal substrate size and organic contents for the growth and survival rate of M. sanguinea larvae and juveniles. It was observed that the smaller grain size (<Ø 0.063 mm) and high organic contents (5-10%) induced settlement and reduced settlement time of larvae. Moreover, the growth and survival rate of larvae reached high levels at Ø 0.004-0.016 mm of grain sizes and 5-7.5% of organic contents as advantageous substrates for settlement. The survival rate of juveniles reached over 90% in less than Ø 0.016 mm substrate on 15-day experiment for different grain sizes of substrates. These results indicated that substrate compositions of less than Ø 0.016 mm of sand size and 5-7.5% of organic contents in mud will enhance the productivity of M. sanguinea at the early stage.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.51 no.2
• /
• pp.170-177
• /
• 2018

Samples were obtained from broodstork in May, 1998, while naturally fertilized embryos were maintained and the process of skeletal development was observed from larvae and juveniles. Prelarvae immediately after hatching showed an average total length of $5.38{\pm}0.41mm$ (n=10), premaxillary and dentary were ossified, parasphenoid was ossified in the cranium, and centrum and caudal bone did not ossify. Prelarvae showed ossification with maxillary, articular and epihyal and branchiostegal rays of hyoid arch were ossified at 5 days after hatching with an average total length of $6.40{\pm}0.39mm$ (n=10). The vertebrae began to ossify in the direction of the tail, and neural spine began to ossify above the ossified vertebra. Postlarvae showed ossification of lateral ethmoid, parietal, and caudal skeleton in the cranium when the average total length was $7.30{\pm}0.12mm$ (n=10) in 8 days after hatching. At 22 days after hatching, postlarvae ossified maxillary in the cranium, and ossified endopterygoid and ectopterygoid, etc. in the palate, when the average length of $11.1{\pm}1.27mm$ (n=10). At 32 days after hatching, with the average length was $12.8{\pm}1.97mm$ (n=10), caudal skeleton had one additional epural bone ossification, resulting in ossification of a total of 3 epural bone to complete ossification of all spicules.

• Journal of Aquaculture
• /
• v.12 no.1
• /
• pp.15-24
• /
• 1999

From January 1997 to May, the red marbled rockfish, Sebastiscus tertius (Barsukov et Chen) was reared in the laboratory, and observed the morphological characteristies of egg and development of larvae and juveniles. The egg is spherical in shape colorless and transparent, measuring 0.72~0.80mm in diameter (mean 0.75mm, n=50). The naturally bearing larvae were 3.79~3.97mm in total length with 7~8＋15~16=22~24 myomeres, and mouth and anus were open. Melanophores were present on the yolk of the larva and ventral margins of the tail. The 1~2 days after bearing larvae measured 3.90~4.13mm in total length, and transformed to postlarval stage, and yolk sac were completely resorbed. On the lower jaw melanophores were present. Total length of the larvae was 4.23~4.60mm in total length (11 days after bearing), number of elongated pectoral fin rays was 9~10, and melanophores distributed on the top of head, around the intestine tube, ventral margins of the tail and on the pectoral fin. In 21 days after bearing, the larva were 5.83~7.10mm in total length, and the caudal notochord flex $45^{\circ}$. Individuals of 9.80~12.36mm in total length (33 days after bearing) are regarded to have reached to the juvenile stage with all the fins were developed.

• Korean Journal of Ichthyology
• /
• v.35 no.3
• /
• pp.151-159
• /
• 2023

This study investigated the early life history of the Micropercops swinhonis in Botongcheon stream Hangang River and compared the relationship between the related species and flexibility. The fertilized egg of the ovoid type, and the average egg diameter was 1.23 mm in long diameter and 0.85 mm in short diameter. At a water temperature of 20.6℃, the hatching time took 179 hours. The newly hatched larvae measured 3.82~4.08 mm in total length (TL), and their mouth and anus were not yet open. At 18 days after hatching, the postflexion larvae reached 7.97~8.43 mm in TL, with the tip of the caudal fin bent at 45°. At 29 days after hatching, the juveniles reached 9.83~10.8 mm in TL and were differentiated by their constant number of fins (7~10 first dorsal, 10~11 second dorsal, 7~10 anal fins). As a result of the study, there was a difference from the related species in the egg diameter, the newly hatched larva size. The postflexion larvae period and the development period of the first dorsal fin were the slowest among the comparable simila species, and the size was characterized by a large number, indicating a difference from similar species in the early life history process.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.42 no.6
• /
• pp.621-627
• /
• 2009

In order to standardize the juvenile abalone rearing technique, we selected sample farms by region in East, West and South coasts of Korea and Jeju island. We also have reviewed previous literature and visited farms to survey on the management of abalone juvenile production, spawning, hatching and so forth. Results of investigation are as follows: The light colors of tanks for larvae breeding are good for a frequent examination of larvae behaviour changes during the breeding period. The tank for the abalone juvenile production is a rectangular form in general and its size should amount to 3.5 m in length and 1.2 m width. It also should be built with proper drainage. The best age and size of adult for juvenile production are 3-6 years old individuals, with 9-12 cm separate burial and 125-150 g average weight. To induce spawning, the use of the exposure on air and ultraviolet ray together was the most effective. The density of larvae by plate should be 150-300 individuals and the proper stocking density was est imated and amount to 10-30 individuals. It has been shown that a correlation between water surface size($X_1$) and number of plates ($Y_1$), when producing abalone juveniles, is quite high and it is described by equation $Y_1=138.88X_1-5,736.8\;(R^2=0.9028)$. In addition, it has also been shown that a correlation between production of abalone juveniles ($Y_2$) and number of plates ($X_2$) is high and it is described by equation $Y_2=4.554X_2+12,493\;(R^2=0.8818)$. In Jindo region where a mass production of juveniles abalone has been done, it was shown, that a correlation between rearing water surface size ($X_3$) and production of juveniles abalone ($Y_3$) is very high and this relationship was described by the equation $Y_3=747.03X_2+94,359(R^2=0.9809)$. It has also been shown that a correlation between water surface size ($X_4$) and production of abalone juveniles ($Y_4$) in nationwide is high and the relationship between this variables was described by equation $Y_4=635.85X_4+99,923\;(R^2=0.9020)$.