• Journal of Korean Society of Forest Science
• /
• v.102 no.3
• /
• pp.398-406
• /
• 2013

Afforestation/reforestation (A/R) clean development mechanism (CDM) is the only forestry-based activities allowed under the Kyoto protocol. This study was conducted to develop a methodology to estimate greenhouse gas (GHG) removals of a small scale A/R CDM pilot project in Goseong, Gangwon Province, Korea. AR-AMS0001 was applied as a methodology and selected tree species were Pinus koraiensis, Larix kaempferi, and Betula platyphylla for total area of 75.0 ha. To improve the accuracy on the GHG removals estimation, selection of the baseline scenario and carbon pools and stratification of the project site were conducted. Based on the developed methodology, net anthropogenic GHG removals were estimated as actual net GHG removals, subtracted by baseline net greenhouse gas removals and leakage. As a result, anthropogenic GHG removals of the project were 12,415 ton $CO_2-e$ and 165.5 ton $CO_2-e/ha$. This project is the first A/R CDM in domestic site and could enhance the technical accuracy of the GHG removals estimation by using countryspecific data reflecting the site condition.

• Asian Journal of Atmospheric Environment
• /
• v.6 no.4
• /
• pp.268-274
• /
• 2012

To perform quick measurements of black carbon (BC) particles deposited on foliar surfaces of forest tree species, we investigated an optical method for measuring the amount of BC extracted from foliar surfaces and collected on quartz fiber filters. The seedlings of Fagus crenata, Castanopsis sieboldii, Larix kaempferi and Cryptomeria japonica were exposed to submicron BC particles for one growing season (1 June to 7 December 2009). At the end of the growing season, the leaves or needles of the seedlings were harvested and washed with deionized water followed by washing with chloroform to extract the BC particles deposited on the foliar surfaces. The extracted BC particles were collected on a quartz fiber filter. The absorption spectrum of the filters was measured by spectrophotometer with an integrating sphere. To obtain the relationship between the absorbance of the filter and the amount of BC particles on the filter, the amount of BC particles on the filter was determined as that of elemental carbon (EC) measured by a thermal optical method. At wavelengths below 450 nm, the absorption spectrum of the filter showed absorption by biological substances, such as epicuticular wax, resulting in the low coefficient of determination ($R^2$) in the relationship between the amount of EC on the filter ($M_{EC}$, ${\mu}g\;C\;cm^{-2}$ filter area) and the absorbance of the filter. The intercept of the regression line between $M_{EC}$ and the absorbance of the filter at 580 nm ($A_{580}$) was closest to 0. There was a significant linear relationship between the $A_{580}$ and $M_{EC}$ ($R^2$=0.917, p<0.001), suggesting that the amount of BC particles collected on the filter can be predicted from the absorbance. This optical method might serve as a simple, fast and cost-effective technique for measuring the amount of BC on foliar surfaces.

• Korean Journal of Environment and Ecology
• /
• v.33 no.1
• /
• pp.28-51
• /
• 2019

The purpose of this study was to analyze forest vegetation structure in Marugeum (the ridge line) area between Dakmokryeong and Daetjae in Baekdudaegan through vegetation classification, importance value, species diversity, and CCA using the data that were collected from 245 quadrates through Braun-Blanquet vegetation survey method from May to September in 2017. The results of the forest vegetation classification identified 8 vegetation units with Quercus mongolica community group at the highest level. Q. mongolica community group was classified into the Cornus controversa community, Buxus koreana community, Sasa borealis community, Abies nephrolepis community, and Q. mongolica typical community. C. controversa community was further classified into Quercus dentata group, Filipendula glaberrima group, Larix kaempferi group, and C. controversa typical group. The result of the important value analysis showed that Q. dentata had the highest importance value at 19.1% in vegetation unit 1 while Q. mongolica had the highest importance value at 22.7%, 38.3%, 25.6%, 41.3%, 27.9%, and 41.6% in vegetation unit 2, 4, 5, 6, 7, and 8, respectively, and L. kaempferi had the highest importance value at 27.6% in vegetation unit 3. As such, Q. mongolica species generally represented the communities of Marugeum (the ridge line) area of Dakmokryeong to Daetjae in Baekdudaegan. The results of species diversity showed that vegetation unit 1 and 2 were 3.305 and 3.236, respectively, which were relatively higher than other vegetation units. It was considered that this result was due to the influence of high emergence of present species. The results of the CCA analysis of the correlations between biotic environmental factors and vegetation types showed that vegetation unit 1 was mainly correlated with the megaphanerophyte ratio and vine plant ratio. In the correlations between abiotic environmental factors and vegetation types, vegetation unit 7 was significantly correlated with altitude. From the perspective of ecological management, vegetation unit 5 represented by B. koreana community was inhabited by a variety of plants due to the species composition and location environment due to the geological characteristics that are typical of limestone area. Vegetation unit 7 represented by A. nephrolepis community was typified as subalpine vegetation widely distributed by relict species and endemic species. We concluded that it is necessary to manage these vegetation units with an ecologically differentiated approach.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.6
• /
• pp.572-583
• /
• 2023

Demand for wood in construction is increasing worldwide. In Korea, technical reviews of high-rise Cross Laminated Timber (CLT) buildings are under way. In this paper, Floor Impact Sound Insulation Performance (FISIP) and Transmission Loss (TL) of 150 mm thick CLT floor panels made of two domestic species, Larix kaempferi and Pinus densiflora, are investigated. The CLT slabs were tested in reverberation chambers connected vertically. When comparing Single Number Quantity (SNQ) of FISIP of the bare panels, the Larix CLT is 3 dB lower in heavy-weight and 1 dB in light-weight than the Pinus CLT. However, there was no difference when concrete toppings were added to improve the performance. As the concrete toppings became thicker, the heavy-weight was reduced by 9 dB ~ 20 dB, and the light-weight by 20 dB ~ 30 dB. And the analysis of these results with area density has confirmed that the area densities are highly correlated (R² = 0.94 ~ 0.99) to the FISIP of the CLT. The types of CLT didn't affect the TL. Comparison of theoretical TL values with measured TL values has shown that the frequency characteristics are similar but 8 dB ~ 12 dB lower in measured values. The relationship between the TL and frequency characteristics of the tested CLT slabs was derived by using the correction value.

• Journal of Korean Society of Forest Science
• /
• v.104 no.3
• /
• pp.421-426
• /
• 2015

The objective of this paper is to look into the growth of Cryptomeria japonica stand in South Korea along with the evaluation on their yields, followed by their carbon stocks and removals. A total of 106 sample plots were selected from Jeonnam, Gyeongnam, and Jeju, where the groups of standard are grown. We only used 92 plots data except outlier. As part of the analysis, the Weibull diameter distribution was applied. In order to estimate the diameter distribution, the growth estimation equation for each of the growth factors including the height, the diameter at breast height, and the basal area was drafted out and the verification for each equation was examined. The site index for figuring out the forest productivity of Cryptomeria japonica stand for each district was also developed as a Schumacher model and 30yr was used as a reference age for the estimation of the site index. It was found that the site index for Cryptomeria japonica stand in South Korea ranges from 10 to 16 and this result was used as a standard for developing the stand yield table. According to the site 14 in the stand yield table, the mean annual increment (MAI) of the Cryptomeria japonica reaches $7.6m^3/ha$ on its 25yr and its growing stock is estimated to be at $190.1m^3/ha$. This volume is about $20m^3$ as high as that of the Chamaesyparis obtusa. Furthermore, the annual carbon absorptions for a Cryptomeria japonica stand reached the peak at 25yr, which is 2.14 tC/ha/yr, $7.83tCO_2/ha/yr$. When compared to the other conifers, this rate is slightly higher than that of a Chamaecyparis obtusa ($7.5tCO_2/ha/yr$) but lower than that of the Pinus koraiensis ($10.4tCO_2/ha/yr$) and Larix kaempferi ($11.2tCO_2/ha/yr$). With such research result as a base, it is necessary to come up with the ways to enhance the utilization of Cryptomeria japonica as timbers, besides making use of their growth data.

• Korean Journal of Plant Resources
• /
• v.34 no.4
• /
• pp.297-310
• /
• 2021

Lonicera harae is a species of shrub in the Caprifoliaceae family, mostly distributed in East asia. So far, the related research on the genus of Lonicera is insufficient compared to the Lonicera japonica belonging to the same genus, which requires attention to domestic native plants. Therefore, this study aims to provide baseline data for cultivation and utilization through the growth environment and vegetation structure of the natural habitat. Lonicera harae, which plant found throughout the Korean Peninsula. The natural habitats of Lonicera harae is the forest, valley and lowland areas of the southern region. study examined 24 quadrats in 11 regions, including Gwangju, Wanju and Namhae. As a result, environmental condition of Lonicera harae was 8 to 483 m above sea level, normally distributed over 173 m, Slope was 5 to 25 degree with 8.5 degree on average. The list of plants were classified as a total of 229 taxa comprising 80 families, 166 genus, 198 species, 3 subspecies, 24 varieties, 4 forma. As a result of the clustering analysis, the three clusters were divided into three groups; Robinia pseudoacacia, Zelkova serrata, Larix kaempferi. Species diversity was 1.399 and Dominance and Evenness were found to be 0.978 and 0.022 respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.6
• /
• pp.757-767
• /
• 2015

This study was conducted to investigate the effects of moisture content and particle size of sawdust on the fuel characteristics of wood pellets produced with Mongolian oak (Quercus mongolica, QUM), red pine (Pinus densiflora, PID) and larch (Larix kaempferi, LAK) sawdust using a flat-die pelletizer. Prior to produce wood pellets, the sawdust was controlled to the moisture content of 8, 11, 12% and was screened to the particle size of 2 and 4 mesh. In the analysis of its chemical composition, QUM had a high ash content, and PID and LAK contained large amount of lignin. In case of the fuel characteristics, PID pellets had the lowest moisture content of pellets (P-MC), and LAR pellets was found to have the highest bilk density (BD) and durability (DU). With the increase of moisture content of sawdust (S-MC), P-MC and DU of QUM, PID and LAK pellets increased, but BD of QUM and LAK pellets decreased. When size of sawdust used for the production of wood pellets decreased, P-MC and BD of LAK pellets and BD of QUM pellets increased. Decrease of particle size contributed to the increase of DU of QUM, PID and LAK pellets. In addition, BD and DU of QUM pellets produced with 12% S-MC sawdust increased as its particle size reduced. For LAK pellets, DU was not influence by particle size in the S-MCs of 10% and 12%, but increased with the decrease of particle size in the S-MC of 8%. Based on the results and economical aspects, 10% MC and 2 mesh paricle size for QUM sawdust and 12% MC and 2 mesh particle size for PID sawdust might be optimal conditions for pellets production, and fuel characteristics of wood pellets produced by the conditions greatly exceeded the minimum requirements for the $1^{st}$-grade wood pellets of the standard designated by Korea Forest Research Institute.

• Korean Journal of Environment and Ecology
• /
• v.26 no.3
• /
• pp.382-393
• /
• 2012

The purpose of this study was to research the vegetation structure of the Bongamsa Forest Genetic Resourses Resreve Area in Mt. Heuyang, Mungyeong, Gyeongsangbuk-do. For doing this, ninety-two plots($100m^2/plot$) were set up and investigated, and then Classification analysis and Ordination analysis were carried out. As a result, the vegetation of this area is divided to nine communities; Quercus mongolica community, Quercus variabilis community, Pinus densiflora community, Pinus densiflora-Quercus serrata community, Pinus densiflora-Quercus mongolica community, Quercus serrata community, Decideous broad leaf community, Pinus koraiensis community, Larix kaempferi community. To compare between the communities, statistical analyses were conducted with topographical condition and the results of the vegetational investigation of each community. In altitude, slope, the number of species, the number of individuals in canopy and the number of individuals of understory layer, the mean averages among the communities were different in statistically significance. Then we analysed the vegetation community structure with Importance Percentage of each stratum. The oak tree communities were expected to keep or expand the actual communities because oak trees are spread widely in canopy and understory layers. But the pine tree dominant communities were expected to be succeeded to oak tree communities in the future because of the wide expansion of oak trees.

• Korean Journal of Environment and Ecology
• /
• v.37 no.5
• /
• pp.367-391
• /
• 2023

This study was conducted for 10 years from 2012, which is a year before the forest road construction in Minjujisan, to 2022 to analyze annual changes in flora and vegetation before and after the forest road construction and to provide strategies for management. The plant communities in the research sites along the forest road showed the differentiation between slopes with Quercus mongolica community on the northwestern slope and Quercus variabilis and Larix kaempferi communities on the southwestern slope. A total of 212 taxa have increased for number 7 between before and after the construction from a total of 66 taxa (44 families, 59 genera, 51 species, 13 varieties, and 2 forma) in 2012 and 207 taxa (71 families, 153 genera, 176 species, 27 varieties, and 4 forma) in 2015 to 278 taxa (78 families, 172 genera, 242 species, 1 subspecies, 31 varieties, and 4 forma) in 2022. It is noteworthy that the vegetation cover and the introduction of new taxa had been expanded in the sites adjacent to the construction, which is likely caused by the significantly increased amount of light and the introduction of annual herbaceous and naturalized plants after the construction. The results of 10 years of current study reveal that the vegetation cover and the number of new taxa had rapidly increased in earlier years after the construction, slowly decreased later on, and finally formed a stable forest with the increase in the ratio of dominant species. The vegetation cover of the herbaceous layer immediately increased on the slopes along the forest road for a few years after the construction although it had continuously decreased while that of the shrub layer quickly increased. It was shown that on the hillslope the vegetation cover of tall- and low-tree layers increased whereas that of herbaceous and shrub layers rapidly decreased.

• The Korean Journal of Mycology
• /
• v.37 no.1
• /
• pp.33-40
• /
• 2009

From 2006 to 2008, natural habitat of Sparassis crispa were surveyed for investigating ecological conditions at sixteen different sites in Korea. The investigated sites showed very wide altitudinal distribution ranged from 240 meters to 1,100 meters above the sea level. In general, S. crispa showed distinct feature of heart-rot fungi as it occurs on soils around the stems of larch (Larix kaempferi) and Korean white pine (Pinus koraiensis). But it also could be found on stems or on the stumps of dead trees, which indicated that the fungus might have several invasion routes and capabilities to grow on various ecological conditions. All of the sixteen sites were pure stands consisted with conifers such as larch or Korean white pine. The dominant tree layer showed $15.3{\sim}38.0$ meters for tree heights, thicker than twenty centimeters for the diameter at breast height (DBH), and all of them were older than thirty years. Since the stands were pure stand, species diversity of trees in the sites was extremely low. While the dominant tree layer showed only pure coniferous stand, the co-dominant tree layer, shrub layer and herbaceous layer showed more diverse features with higher Shannon-Wiener (H') indices. Soil texture of thirteen sites among sixteen investigated sites were loamy soils, and the contents of organic matter in soil were more or less higher than general forest soils in Korea with $3.79{\sim}14.32%$. The cation exchange capacity (CEC) was also relatively higher than general forest soils with $16.1{\sim}27.2$ cmol+/kg. The data indicated that the cauliflower mushroom occurring sites were relatively fertile than general forest soils. The soils were acidic with pH ranged from 4.2 to 5.2, which were typical features for conifer stands in Korea.