• Steel and Composite Structures
• /
• v.43 no.2
• /
• pp.139-152
• /
• 2022

Steel-reinforced concrete (SRC) L-shaped column is the vertical load-bearing member with high spatial adaptability. The seismic behavior of SRC L-shaped column is complex because of their irregular cross sections. In this study, the hysteretic performance of six steel truss reinforced concrete L-shaped columns specimens under the combined loading of compression, bending, shear, and torsion was tested. There were two parameters, i.e., the moment ratio of torsion to bending (γ) and the aspect ratio (column length-to-depth ratio (φ)). The failure process, torsion-displacement hysteresis curves, and bending-displacement hysteresis curves of specimens were obtained, and the failure patterns, hysteresis curves, rigidity degradation, ductility, and energy dissipation were analyzed. The experimental research indicates that the failure mode of the specimen changes from bending failure to bending-shear failure and finally bending-torsion failure with the increase of γ. The torsion-displacement hysteresis curves were pinched in the middle, formed a slip platform, and the phenomenon of "load drop" occurred after the peak load. The bending-displacement hysteresis curves were plump, which shows that the bending capacity of the specimen is better than torsion capacity. The results show that the steel truss reinforced concrete L-shaped columns have good collapse resistance, and the ultimate interstory drift ratio more than that of the Chinese Code of Seismic Design of Building (GB50011-2014), which is sufficient. The average value of displacement ductility coefficient is larger than rotation angle ductility coefficient, indicating that the specimen has a better bending deformation resistance. The specimen that has a more regular section with a small φ has better potential to bear bending moment and torsion evenly and consume more energy under a combined action.

• Journal of Chest Surgery
• /
• v.33 no.2
• /
• pp.173-178
• /
• 2000

Background: Though the surgical treatment of stage IIIB lung cancer is not generalized due to low complete remission rate high morbidity and mortality there are several reports on the improvement of long term survival after preoperative and postoperative adjuvant therapy. In this study we analyzed the prognostic factors affecting long term survival after surgical treatment of stage IIIB lung cancer Material and method: We analyzed the long term survival for age pathology invaded mediastinal organ n stage type of operation complete or incomplete resection and adjuvant therapy through a retrospective review of patients underwent surgical treatment. Result: From 1990 to 1998 56 patients(51/male 5/female0 with stage IIIB lung cancer were trated surgically. Forty two patients underwent radical resection and morbidity and mortality were 17% 12% respectively. The survival rate for overall patients and the radical resection group were 9% 12% respectively. In the radical resection group excluding explothoracotomy only(n=14) and the surgical mortality patients(n=5) the age the type of operation celly type resectability and N stage had no influence on the long term survival. The survival rate of radical resection group was significantly better than that of the explothoracotomy only group(p=0.04) The long term survival rate of postoperative combination therapy group was significantly better than chemotherapy or radiotherapy alone(p=0.04) Conclsion: Age type after surgical treatment of stage IIIB lung cancer. We conclude that combined modality of adjuvant treatment after radical resection of stage IIIB lung cancer seems to offer better long term survival in selective patients. The numbers of patients involved was small. Nevertheless these preliminary findings indicate questions that will need to be experienced further in larger studies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.7
• /
• pp.2931-2938
• /
• 2011

Effective thermal conductivity of three-phase composites, consisting of matrix and two kinds of spherical inclusions, has been derived as an explicit form by extending modified Eshelby model (MEM) for two-phase composites. The present results are compared with those by differential effective medium model (DEMM), which are also compared with the experimental results of two- and three-phase composites in the literatures to be validated. For two-phase composites, the results by MEM are better than those by DEMM for the inclusion volume fraction smaller than 0.5. Comparisons between the results by two models and experimental results have been made for three-phase composite, resulting in that MEM predicts better than DEMM for smaller volume fraction of the inclusion having larger inclusion-to-matrix thermal conductivity ratio, but DEMM predicts better as its volume fraction increases. It has been observed through parametric study that its volume fraction is the critical factor affecting the deviation of predictions by the two models. The results by them show a good agreement with the three-phase composite proposed by Molina et al..

• Korean Journal of Optics and Photonics
• /
• v.19 no.2
• /
• pp.108-115
• /
• 2008

We designed optical systems for a mobile phone camera using a spherical SELFOC lens and an aspherical plastic lens. Since the radial index distribution gives an additional design parameter for optical design, an aspheric lens could be replaced by a spherical lens. The imaging performances of the design were compared with conventional 2P design composed of two aspherical plastic lenses. In the first stage of study, we designed 1GRIN 1P lenses by using commercially available SELFOC materials. But, the conventional 2P lenses had better performance than the 1GRIN 1P lenses. In the 1GRIN 1P designs, the performance depends on index variation of GRIN material, the larger variation gives the better performance. Hence, we tried to design by using fictitious GRIN materials which have large index variation. We found if the index variation could be increased to about 3 times that of currently available SELFOC materials, the 1GRIN 1P lens will have equivalent or better performance than the conventional 2P design.

• The Korean Journal of Pain
• /
• v.35 no.2
• /
• pp.191-201
• /
• 2022

Background: This study aimed to assess the efficacy of the adductor canal block (ACB) in comparison to intra-articular steroid-lidocaine injection (IASLI) to control chronic knee osteoarthritis (KOA) pain. Methods: A randomized, single-blinded trial in an outpatient rehabilitation clinic recruiting chronic KOA with pain ≥ 6 months over one year. Following randomization, subjects received either a single ACB or IASLI under ultrasound guidance. Numerical rating scale (NRS) scores for pain, and Knee Injury and Osteoarthritis Outcome Scores (KOOS) were recorded at baseline, 1 hour, 1 month, and 3 months postinjection. Results: Sixty-six knees were recruited; 2 were lost to follow-up. Age was normally distributed (P = 0.463), with more female subjects in both arms (P = 0.564). NRS scores improved significantly for both arms at 1 hour, with better pain scores for the IASLI arm (P = 0.416) at 1st month and ACB arm at 3rd month (P = 0.077) with larger effect size (Cohen's d = 1.085). Lower limb function improved significantly in the IASLI arm at 1 month; the ACB subjects showed greater functional improvement at 3 months (Cohen's d = 0.3, P = 0.346). Quality of life (QoL) improvement mirrored the functional scores whereby the IASLI group fared better at the 1st month (P = 0.071) but at the 3rd month the ACB group scored better (Cohen's d = 0.08, P = 0.710). Conclusions: ACB provides longer lasting analgesia which improves function and QoL in chronic KOA patients up to 3 months without any significant side effects.

• Journal of the Korean Ceramic Society
• /
• v.40 no.6
• /
• pp.507-512
• /
• 2003

The LiN $i_{l-y}$ $Co_{y}$ $O_2$ samples were synthesized at 80$0^{\circ}C$ and 85$0^{\circ}C$, by the solid-state reaction method, from the various starting materials LiOH, L $i_2$C $O_3$, NiO, NiC $O_3$, $Co_3$ $O_4$, CoC $O_3$, and their electrochemical properties are investigated. The LiN $i_{l-y}$ $Co_{y}$ $O_2$ pre-pared from L $i_2$C $O_3$, NiO, and $Co_3$ $O_4$ exhibited the $\alpha$-NaFe $O_2$ structure of the rhombohedral system (space group; R3m). As the Co content increased, the lattice parameters a and c decreased. The reason is that the radius of Co ion is smaller than that of Ni ion. The increase in da shows that two-dimensional structure develops better as the Co content increases. The LiN $i_{0.7}$ $Co_{03}$. $O_2$［HOO(800,0.3)] synthesized at 80$0^{\circ}C$from LiOH, NiO, and $Co_3$ $O_4$ exhibited the largest first discharge capacity 162 mAh/g. The size of particles increases roughly as the valve of y increases. The samples with the larger particles have the larger first discharge capacities. The cycling performances of the samples with the first discharge capacity larger than 150 mAh/g were investigated. The LiN $i_{0.9}$ $Co_{0.1}$ $O_2$［COO(850,0.1)］ synthesized at 85$0^{\circ}C$ from L $i_2$C $O_3$, NiO, and $Co_3$ $O_4$ showed an excellent cycling performance. The sample with the larger first discharge capacity will be under the more severe lattice destruction, due to the expansion and contraction of the lattice during intercalation and deintercalation, than the sample with the smaller first discharge capacity. As the first discharge capacity increases, the capacity fading rate thus increases.increases.s.s.s.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.5
• /
• pp.615-624
• /
• 2014

In this paper, we explore the electrical properties and high-frequency performance of carbon nanotube field-effect transistors (CNTFETs), based on the non-equilibrium Green's functions (NEGF) solved self - consistently with Poisson's equations. The calculated results show that CNTFETs exhibit superior performance compared with graphene nanoribbon field-effect transistors (GNRFETs), such as better control ability of the gate on the channel, higher drive current with lower subthreshold leakage current, and lower subthreshold-swing (SS). Due to larger band-structure-limited velocity in CNTFETs, ballistic CNTFETs present better high-frequency performance limit than that of Si MOSFETs. The parameter effects of CNTFETs are also investigated. In addition, to enhance the immunity against short - channel effects (SCE), hetero - material - gate CNTFETs (HMG-CNTFETs) have been proposed, and we present a detailed numerical simulation to analyze the performances of scaling down, and conclude that HMG-CNTFETs can meet the ITRS'10 requirements better than CNTs.

• International Journal of Human Ecology
• /
• v.14 no.1
• /
• pp.115-130
• /
• 2013

This study reviews the current status of Korean first graders, their experience with early care and education (ECE) programs, and their participation in private and after-school education. The research also examines how school adjustment during the first grade is related to family income, types of ECE programs, and participation in private and after-school education. Using the first year data of the Korean Child and Youth Panel Survey (KCYPS) 2010, this study analyzes 752 first graders who attended only one of two types of ECE programs (child care centers or kindergartens), after which two 25% income extremes were examined. The analysis demonstrates that children from low-income households attended child care centers more often, while children from high-income households attended kindergartens more often. For both low-income and high-income groups, child care centers had a lower starting age and longer attendance periods than did kindergartens. High-income household children started attending ECE programs earlier, experienced more private and after-school education, and received a larger number of private and after-school educational lessons. For the second research purpose, children from low-income families showed better peer relations in school adjustment, while children attending child care centers showed better teacher relations than children attending kindergartens. Children with after-school education also exhibited better peer relations. These findings show the importance of government support for early learning, especially for low-income families and offer a foundation for developing private education polices for early childhood before and after school entry.

• Journal of Sericultural and Entomological Science
• /
• v.3
• /
• pp.37-43
• /
• 1963

This experimental work was carried out to know the best method in producing the root stock effectively. The major experimental work was carried out by using Kairyo-Nezumigaeshi, and the comparative works were carried out by using Ichi-Hei, Kairyo-Nezumigaeshi, Ro-Soh, Yongchon-Chuwoo and Suwon No. 4. Results obtained from the test are as follows. 1. The larger size of the branch burried, the better live ratio and the quality of the sapling was found, and there was no significant difference between the top part and bottom part of the branch from the point of view of the ratio, but it was found that the top part showed better live ratio and quality. Mean time there was no difference in live ratio between the two sprouts root-stock type and the three sprouts root-stock type. 2. When the live ratio and sapling quality was compared from the aspect of the new root development, the heavy and medium developed root type showed better result than the poor developed one. 3. For the ambushing depth test of the root-stock, the root-stock which was painted with paraffin on the top and exposed in the air was found to have best live ratio. Mean time, even though paraffin was not painted all the top of the root-stock, the one which was exposed the top of it or the one ambushed with thin soil layer, showed better live ratio than the one deep ambushed. 4. There was difference for the live ratio between the perpendicularly ambushed root-stock and the lied ambushed mot-stock, but the former method showed better sapling quality. 5. The soil nature did not show any difference for the live ratio between the sand loam and clay loam, but the former one showed better sapling quality. 6. There was no difference live ratio between the mulberry varieties, but Yongchon-Chuwoo showed best sapling quality. 7. The grafted sapling production cost was 2.30 won and cattage sapling cost was 1.61 won.

• Journal of Nutrition and Health
• /
• v.29 no.6
• /
• pp.651-660
• /
• 1996

The purpose of this study was to examine and analyze the degrees and the influence factors of job satisfaction of dietitians working in hospitals in relation to performance of duty in their works and to provide effective management of hospital dietitians for high quality health and food service in hospital. The questionaire was prepared with reference to the previous studies on job satisfaction of dietitians working in hospitals throughout the nation. 201 dietitians in the country were surveyed. The period of research was from January 20 to February 28, 1995. The results are as follows. 1) In regard to the degree of job satisfaction of hospital dietitians, they showed the highest degree of job satisfaction in the relationships with fellow dietitians followed by worth and self-confidence, aptitude and interests, relationships with cooks, job stability, degree of recognition of the dietitians competence, supervision of the superiors, degree of application of professional knowledge, work load, wage level, degree of recognition of the importance of duty, cooperative relationships with load, wage level, degree of recognition of the importance of duty, cooperative relationships with doctors, degree of performance of clinical work, the number of dietitians, the prromotion system, and welfare system in that order. On the other hand, they showed the highest dissatisfaction with food service facilities. 2) The influence factors on job satisfaction are as follows. (1) Wage factor : Shorter weekday working hours and higher bonuses make greaster job satisfaction (R2=0.3115). (2) Working condition factor : Larger number of monthly holidays(R2=0.5142), shorter weekday working hours(R2=0.1077), longer previous food service experience and computer utilization (R2=0.1432) make greater job satisfaction. (3) Welfare factor : Welfare system (R2=0.4132) and promotion system (R2=0.1624) have to do with computer utilization. Job stability has to do with marital status and computer utilization (R2=0.1165). consequently, those married dietitians who use computers show higher job satisfaction. (4) Human relationship factor : Smaller mumber of patients receiving food makes greater job satisfaction (R2=0.1334). (5) Superivision factor : Shorter weekday working hours and larger number of monthly holidays make greater job satisfaction (R2=0.1709). (6) Achievement factor : Marriage, larger number of dietitians(R2=9.2293), age, larger number of monthly holiday, higher monthly wages and computer utiliazation (R2=0.1088) make greater job satisfaction. (7) Speciality factor : Marriage, longer current hospital tenure, higher position and working in seoul(R2=0.1142) make higher job satisfaction. (8) Job inclination factor : working in general hospitals rather than in oriental hispitals, working in seoul(R2=0.1776) and better bonuses(R2=0.1078)make greater job satisfaction. As a result, the following is suggested for the job satisfaction of hospital dietitions on the basis of this study : hospital dietitians can achieve miximum job satisfaction through smooth relationships with coworkers, and the responsible managers should improve welfare and working conditions for the job satisfaction of hospital dietitians.