• Composites Research
• /
• 제29권5호
• /
• pp.288-292
• /
• 2016

본 연구에서는 전영역 초음파전파영상화 시스템이라 불리는 새로운 초음파전파영상화 장치를 소개한다. 본 시스템은 비파괴적으로 구조를 2 축 선형 이동 스테이지 기반으로 검사한다. 일치된 초음파 센싱과 가진 레이저 빔이 구조를 스캔하며 동시에 펄스-에코 모드 레이저 초음파를 수집한다. 이 과정은 스캔영역만큼 큰 두께 방향의 전영역 초음파를 생성하는 것을 가능하도록 한다. 본 시스템을 사용하여 실제로 운용 중인 알루미늄 허니콤 구조 기반의 CN-235의 도색된 샌드위치 조종면를 검사 및 평가하고 구조 검사 결과로써 전영역 초음파전파 영상을 소개하였으며 기존 초음파 탐상 기법의 결과와 비교하여 성능 및 민감도를 검증하였다.

• Bulletin of the Korean Chemical Society
• /
• 제32권2호
• /
• pp.510-514
• /
• 2011

Photodissociation dynamics of allyl alcohol ($H_2C$=CH-$CH_2OH$) has been investigated at 205 - 213 nm along the UV absorption band by measuring rotationally-resolved laser-induced fluorescence spectra of OH radicals. Observed energy partitioning of the available energy among products at all photon energies investigated was similar and the barrier energy for OH production is about 574.7 kJ/mol from the OH yield measurements. The potential energy surfaces for the $S_0$, $T_1$, and $S_1$ excited states along the dissociation coordinate were obtained by ab initio quantum chemical calculations. The observed energy partitioning was successfully modeled by the "barrier-impulsive model" with the reverse barrier and the geometry obtained by the calculated potential energy surfaces. The dissociation takes place on the $T_1$ excited state potential energy surface with an energy barrier in the exit channel and a large portion of the photon energy is distributed in the internal degrees of freedom of the polyatomic products.

• 한국융합학회논문지
• /
• 제9권10호
• /
• pp.7-12
• /
• 2018

빠르게 성장하고 있는 현대 사회에서 생산 공정에 비전 시스템을 활용하여 자동화 하고자 하는 수요가 급증하고 있는 추세이다. 일반적으로 영상 인식은 주로 자동차 번호판과 같은 양각 문자에 대한 연구가 대부분으로, 음각 문자 인식에 대한 연구가 매우 미미한 상황이다. 특히 타이어 표면과 같은 고무 관련 제품에 마킹 되어 있는 음각 문자들은 주변과의 명도 차이가 크지 않기에 문자나 숫자를 영상을 통하여 인식하기에 매우 어려움을 가지고 있다. 이에 본 논문에서는 타이어 표면과 같은 고무 제품에 음각으로 마킹 되어 있는 문자의 인식률을 향상시키기 위한 시스템을 제안한 것으로, 조명의 환경에 따라 유연하게 적용할 수 있다. 제안 시스템을 통하여 타이어 및 고무 제품들의 생산 공정에 적용하면 생산 및 재고 관리와 불량 검출을 신속하게 처리할 수 있어 생산 효율성이 향상될 것으로 기대된다.

• 한국CDE학회논문집
• /
• 제17권3호
• /
• pp.188-197
• /
• 2012

Recently, aluminum ships are constructed more than ever because of the environmental pollution generated by FRP (Fiber Reinforced Plastic) ships. In particular, FRP ships have been replaced by the Aluminum ships. The forming process of the curved aluminum plate has been performed only by labor works without systematic technique. Therefore, it is difficult to construct the aluminum ship that the design satisfies both required propulsion performance and hull design. Present study introduces a MPSF (Multi Point Stretching Forming) that is a flexible manufacturing technique to form large sheet panels of doubly curvature. The hull pieces are stretch-formed over the MPSD (multi-point stretching die) generated by the punch element matrix. In this study, MPSF is applied to deform the doubly curved surfaces of aluminum ship. The forming system including FEA (finite element analysis) of the processes for stretching the plate were carried out by static implicit analysis is suggested. Residual deformation of the surface is modeled by an elasto-plastic contact phenomena while the forming process is simulated by FEA. Finally, the proposed system is also validated, comparing the deformed shape by MPSF with that of object surfaces.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2003년도 학술대회지
• /
• pp.313-323
• /
• 2003

The sliding wear behaviors of Zircaloy-4 nuclear fuel rod were investigated using two support springs with convex and concave shapes in room temperature air and water. The main focus is to compare the wear behavior of various test variables such as slip amplitude, environment, contact contours with different spring shape and a number of cycles. The results indicated that wear volume and maximum wear depth increased with slip amplitude in both air and water, but their trends tended to change according to the spring shapes and test environments. In air condition, the wear volume was controlled by wear debris behavior generated on worn surface. As a result, final wear volume and maximum wear depth decreased if a ratio of protruded wear volume to worn area $(D_p)$ would be saturated to specific value. This is because wear particle layer could accommodate large strain by accumulating and transforming wear particle layer. However, in water condition, metal-to metal contact was more dominant and wear volume was greatly affected by changed mechanical behavior between contact surfaces since wear debris should be generated after repeated plastic deformation and fracture. After wear test, worn surfaces were examined using optical microscope and SEM and details of wear mechanism were discussed using a ratio of wear volume to worn area $(D_e)$ at each test condition.

• 대한약침학회지
• /
• 제11권1호
• /
• pp.5-12
• /
• 2008

목적 : 봉한소체가 성체줄기세포의 원천이며, 봉한관이 줄기세포 수송로일 가능성을 확인함. 방법 : 쥐의 내부 장기표면에서 봉한소체와 봉한관을 채취했다. 다양한 줄기세포 표지항체를 써서 면역조직학적 분석을 했다. 결과 : mesenchymal 줄기세포에 관한 Integrin ${\beta}1$, Collagen type 1, Fibronectin의 강한 발현을 확인했다. CD54는 발현되지 않았다. 조혈줄기세포에 관련하여 Thy 1의 발현이 있었다. 결론 : 골수조직과 유사하게 mesenchymal과 조혈줄기세포의 표지가 BHC에서 확인되었고, 봉한관에서는 vWF가 발현되어 줄기세포 수송로 가능성을 확인했다.

• The Journal of Advanced Prosthodontics
• /
• 제6권3호
• /
• pp.165-170
• /
• 2014

PURPOSE. This study was aimed to evaluate effect of the desensitizing pretreatments on the micro-tensile bond strengths (${\mu}TBS$) to eroded dentin and sound dentin. MATERIALS AND METHODS. Forty-two extracted molars were prepared to form a flat dentin surface, and then they were divided into two groups. Group I was stored in distilled water while group II was subjected to a pH cycling. Each group was then subdivided into three subgroups according to desensitizing pretreatment used: a) pretreatment with desensitizer (Gluma); b) pretreatment with $CO_2$ Laser (Ultra Dream Pluse); c) without any pretreatment. All prepared surfaces were bonded with Single Bond 2 and built up with resin composite (Filtek Z250). The micro-tensile bond test was performed. Fracture modes were evaluated by stereomicroscopy. Pretreated surfaces and bonded interfaces were characterized by scanning electron microscope (SEM). The data obtained was analyzed by two-way ANOVA (${\alpha}$=0.05). RESULTS. For both sound and eroded dentin, samples treated with desensitizer showed the greatest ${\mu}TBS$, followed by samples without any treatment. And samples treated with $CO_2$ laser showed the lowest ${\mu}TBS$. SEM study indicated that teeth with eroded dentin appeared prone to debonding, as demonstrated by existence of large gaps between adhesive layers and dentin. CONCLUSION. Pretreatment with Gluma increased the ${\mu}TBS$ of Single Bond 2 for eroded and sound teeth. $CO_2$ laser irradiation weakened bond performance for sound teeth but had no effect on eroded teeth.

• 한국전자파학회논문지
• /
• 제13권6호
• /
• pp.590-598
• /
• 2002

맥스웰방정식의 직접해인 FVTD(Finite Volume Time Domain)법을 이용하여, 저입사시의 불규칙 조면에서의 전자파 산란 문제를 수치해석 하였다. FVTD댑은 복잡한 구조의 전자파의 산란문제에 대해서 개발된 시간영역에 의한 수치해석법이며, 종래의 FDTD(Finite Difference Time Domain)법 보다 임의형태의 경계문제를 쉽게 다룰 수 있는 이점을 가지고 있다. 그러나 산란물체의 형태가 아주 복잡하고 정도를 문제삼을 경우 FVTD법에서는 셀 사이즈(cell size)를 충분히 세분화 할 필요가 있다. 그 경우 셀 사이즈에 의한 수치해의 수속성을 검토하고, 외삽법(extrapolation method)을 이용해서 간단하고 정확한 후방산란계수를 측정하는 방안을 제시했다. 더욱이 취급하는 편파의 상이를 특징짖는 레이다 단면적의 편파비에 대해서 입사각(grazing angle) 이 10도 이하의 해면 레이다의 실험결과와 비교하여, FVTD법의 수치계산 결과가 실측치와 잘 일치하는 결과를 제시했다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1998년도 춘계 총회 및 학술발표회
• /
• pp.99-101
• /
• 1998

1. Introduction : The conventional grafting polymerization technique requires chemically reactive groups on the surface as well as on the polymer chains. For this reason, a series of prefunctionalization steps are necessary for covalent grafting. The surface prefunctionalizational technique for grafting can be used to ionization radiation, UV, plasma, ion beam or chemical initiators. Of these techniques, radiation method is one of the useful methods because of uniform and rapid creation of active radical sites without catalytic contamination in grafted samples. If the diffusion of monomer into polymer is large enough to come to the inside of polymer substrate, a homogeneous and uniform grafting reaction can be carried out throughout the whole polymer substrate. Radiation-induced grafting method may attach specific functional moieties to a polymeric substrate, such as preirradiation and simultaneous irradiation. The former is irradiated at backbone polymer in vacuum or nitrogen gas and air, and then subsequent monomer grafting by trapped or peroxy radicals, while the latter is irradiated at backbone polymer in the presence of the monomer. Therefore, radiation-induced polymerization can be used to modification of the chemical and physical properties of the polymeric materials and has attracted considerable interest because it imparts desirable properties such as blood compatibility. membrane quality, ion excahnge, dyeability, protein adsorption, and immobilization of bioactive materials. Synthesizing biocompatible materials by radiation method such as preirradiation or simultaneous irradiation has often used $\gamma$-rays to graft hydrophilic monomers onto hydrophobic polymer substrates. In this work, in attempt to produce surfaces that show low levels of anti-fouling of bovine serum albumin(BSA) solutions, hydroxyethyl methacrylate(HEMA) was grafted polypropylene membrane surfaces by preirradiation technique. The anti-fouling effect of the polypropylene membrane after grafting was examined by permeation BSA solution.

• 한국안광학회지
• /
• 제11권1호
• /
• pp.71-75
• /
• 2006

본 연구의 목적은 사용한 RGP 콘택트렌즈의 표면 미세구조의 분석을 한 것이다. 조사를 위해 RGP콘택트렌즈는 피검자에 의해 1개월, 6개월 그리고 1년 사용한 것을 선택하였다. 이러한 RGP 콘택트렌즈의 전후 표면은 주사전자현미경으로 조사를 하였다. 그 결과는 다음과 같다. 1. RGP 콘택트렌즈 사용 1개월 후 전면과 후면의 표면은 선명하고 깨끗하였다. 2. 6개월 사용 렌즈의 전방 표면은 심한 반흔, 상처 자국, 파손 그리고 긁힘을 가지고 있었다. 그러나 후방 표면은 심한 이물질과 미생물 등이 나타났다. 3. 1년 사용렌즈는 좀더 심한 큰 반흔 손상과 많은 이물질들이 관찰되었다. 따라서 RGP 콘택트렌즈의 연장착용은 렌즈표면의 미세구조의 증가된 물리적인 손상과 심한 이물질의 누적을 나타내었다.