• 한국농공학회논문집
• /
• 제51권3호
• /
• pp.15-24
• /
• 2009

This study tried to develop a tentative evaluation system on greentourism potentials(GTP) of rural villages. The GTP evaluation system consisted of 45 detail criteria within three kinds of large scale criteria, which are human resources of residents capability, amenity resources of tourists attraction, and income resources through exchange activity between rural and urban areas. The evaluation criteria were adapted from several decades existing studies considering the hardware(facility and amenity resources) and software(human resources and programs on tourism)resources in rural villages. Two kinds of test study areas, which are subdivisions of county in a typical rural area(Boori) and an suburbanized area surrounding a big city(Chooboo), located on Keumsan county in Chungnam province, were selected to test the GTP evaluation system. The results showed that the average GTP values of each village in Boori are higher than those of Chooboo, due to higher values in criteria on amenity resources and income resources, which the typical rural area may have higher value in such criteria.

• Nuclear Engineering and Technology
• /
• 제56권1호
• /
• pp.1-8
• /
• 2024

In this study, the influence of thermal aging on structural integrity is investigated for Gr. 91 steel. A commercial grade Gr. 91 steel is used for the virgin material, and service-exposed Gr. 91 steel is sampled from a steam pipe of a super critical plant. Time versus creep strain curves are obtained through creep tests with various stress levels at 600 ℃ for the virgin and service-exposed Gr. 91 steels, respectively. Based on the creep test results, the improved Omega model is characterized for describing the total creep strain curve for both Gr. 91 steels. The proposed parameters for creep deformation model are used for predicting the steady-state creep strain rate, creep rupture curve, and stress relaxation. Creep-fatigue damage is evaluated for the intermediate heat exchanger (IHX) in a large-scale sodium test facility of STELLA-2 by using creep deformation model with proposed creep parameters and creep rupture curve for both Gr. 91 steels. Based on the comparison results of creep fatigue damage for the virgin and service-exposed Gr. 91 steels, the thermal aging effect has been shown to be significant.

• 지질공학
• /
• 제28권2호
• /
• pp.193-206
• /
• 2018

본 연구는 "포항분지 해상 소규모 $CO_2$ 주입실증 프로젝트"의 일환으로 경상북도 포항시 영일만에 설치된 해상 플랫폼에서 $CO_2$ 주입 실증을 위한 주입정 시추 및 완결(well drilling and completion)을 수행하였다. 주입정 시추(well drilling)는 포항분지 해상지역 퇴적지층에 설치한 해상플랫폼의 상부부터 해저면까지 케이싱 설치를 시작으로 단계별로 굴진 공경을 축소하면서 케이싱 설치 및 시멘트 그라우팅(cement grouting)을 시행하며 진행하였다. 최종심도 816.5 m 까지 공경 4 7/8 inch (${\Phi}124mm$) 규격으로 굴진하여 심도 746.5~816.5 m 구간에 유공 케이싱을 설치하여 주입구간을 형성하였다. $CO_2$ 주입을 위한 주입공 완결(well completion)을 위하여 주입관, 패커(packer), 주입탑(christmas tree)을 설치하였다. 주입공을 완결하고 주입 플랜트 설비를 설치하여 $CO_2$ 시험 주입을 성공적으로 수행하였다. 현재의 주입설비는 100톤 규모의 소규모 주입 실증을 위한 설비로서 향후 주입설비 격상을 통하여 총 1만톤의 중규모 실증 주입설비로 추가적인 연구개발을 진행하고 있다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1995년도 춘계학술대회논문집; 전남대학교, 19 May 1995
• /
• pp.196-201
• /
• 1995

The broadband and discrete sources of sound in small cooling fans of propeller type and centrifugal type were investigated to understand the turbulent vortex structures from many bladed fans using ANSI test plenum for small air-moving devices (AMDs). The noise measurement method uses the plenum as a test apparatus to determine the acoustic source spectral density function at each operating conditions similar to real engineering applications based on acoustic similarity laws. The characteristics of fans including the head rise vs. volumetric flow rate performance were measured using a performance test facility. The sound power spectrum is decomposed into two non-dimensional functions: an acoustic source spectral distribution function F(St,.phi.) and an acoustic system response function G(He,.phi.) where St, He, and .phi. are the Strouhal number, the Helmholtz number, and the volumetric flow rate coefficient, respectively. The autospectra of radiated noise measurements for the fan operating at several volumetric flow rates,.phi., are analyzed using acoustical similarity. The rotating stall in the small propeller fan with a bell-mouth guided is mainly due to a leading edge separation. It creates a blockage in the passage and the reduction in the flow rate. The sound power levels with respect to the rotational speeds were measured to reveal the mechanisms of stall and/or surge for different loading conditions and geometries, for example, fans installed with a impinging plate. Lee and Meecham (1993) studied the effect of the large-scale motions like impinging normally on a flat plate using Large-Eddy Simulation(LES) and Lighthill's analogy.[ASME Winter Annual Meeting 1993, 93-WA/NCA-22]. The dipole and quadrupole sources in the fans tested are shown closely related to the vortex structures involved using cross-correlations of the hot-wire and microphone signals.

• Ecology and Resilient Infrastructure
• /
• 제6권4호
• /
• pp.217-226
• /
• 2019

본 연구에서는 하천의 하안 경사와 친수시설 유무에 따라 적절한 하안 보호 공법을 유형화하였으며, 특히 기존의 호안 공법으로 하안침식 방지 대책 적용이 적절하지 않은 유형에 대해 적용 가능한 신개념 Eco-hybrid 롤링매트 공법을 제시하였다. Eco-hybrid 롤링매트 공법은 지반과 사면의 교란없이 하천 환경과 생태 조건의 변화를 최소화하는 시공이 가능하고, 하안침식이 발생할 경우 즉각적인으로 호안이나 제방 사면을 보호할 수 있는 경제적이고 효율적인 공법이다. 개발된 Eco-hybrid 롤링매트 공법은 실규모 하천 실험을 통해 공법의 구조 및 시스템, 기능과 효과를 검증하였다. 현장에서 발생할 수 있는 여러 변형 및 부패 테스트를 포함한 실규모 하천 실험 검증을 수행하였으며, 저유속과 고유속 조건에서 롤링매트의 작동과 하안침식 방지 효과를 확인하였다. 하안침식 방지 효과는 유사 농도 분석을 통해 정량적으로 검증하였으며, 실험에 활용한 롤링매트를 기준으로 규격화하여 Eco-hybrid 롤링매트 공법의 제품의 시방 (안)을 제시하였다.

• 국제초고층학회논문집
• /
• 제4권3호
• /
• pp.171-180
• /
• 2015

A shaking table test was conducted at the E-Defense shaking table facility to investigate the damage and collapse behavior of a steel high-rise building under exceedingly large ground motions. The specimen is a one-third scale 18-story steel moment frame designed and constructed according to design specifications and practices used in the 1980s and 1990s. The shaking table tests used a long-duration, long-period ground motion simulated for a sequential Tokai, Nankai, and Nankai earthquake scenario. The building specimen was subjected to a series of progressively increasing scaled motions until it completely collapsed. The damage to the steel frame began through the yielding of beams along lower stories and column bases of the first story. After several excitations by increasing scaled motions, cracks initiated at the welded moment connections and fractures in the beam flanges spread to the lower stories. As the shear strength of each story decreased, the drifts of lower stories increased and the frame finally collapsed and settled on the supporting frame. From the test, a typical progression of collapse for a tall steel moment frame was obtained, and the hysteretic behavior of steel structural members including deterioration due to local buckling and fracture were observed. The results provide important information for further understanding and an accurate numerical simulation of collapse behavior.

• 한국태양에너지학회 논문집
• /
• 제26권3호
• /
• pp.1-8
• /
• 2006

The objective of this research is to study on the analysis of long-term performance characteristics of various solar thermal system for heating protected horticulture system for reducing heating cost, increasing the value of product by environment control, and developing advanced culture technology by deploying solar thermal system. Long term field test for the demonstration was carried out in horticulture complex in Jeju Island. Reliability and economic aspect of the system which was operated complementary with thermal storage and solar hot water generation were analyzed by investigating collector efficiency, operation performance, and control features. Optimum operating condition and its characteristics were closely investigated by changing the control condition based on the temperature difference which is the most important operating parameter. However, it is expected that, in high-insolation areas where large-scale ground storage is adaptable, solar system demonstrated in the research could be economically competitive and promisingly disseminate over various application areas.

• 한국전산유체공학회지
• /
• 제21권2호
• /
• pp.32-39
• /
• 2016

The Gradient Biome is a unique and large greenhouse(length 200 m, width 50 m, height:40 m) in which the elements of the weather, such as temperature and humidity, are controlled and reproduced in such a way as to create a continuous gradient from the tropical to frigid zones along specified longitudinal or transvers lines on the earth. One of the main purposes of the Gradient Biome is to observe the possible responses of the ecosystems (mainly plants), which are to be corresponding to each test climate and be introduced in the Biome, to the expected global warming. As one of the expected responses is the shift of the ecosystem(s) toward the region of suitable environment, there should be no artificial obstacles, which can prevent the shift, inside the facility. However, it is important but not so easy to find the ways of how the temperature and humidity in the Biome could be reproduced since the environmental variables tends to be homogeneous. In this paper, numerical simulations were carried out to find the effective control methods for air temperature and humidity inside the real scale Biome. One of the contributed solvers of OpenFOAM, which is an open source physics simulation code, was modified and used for the simulations.

• Spatial Information Research
• /
• 제6권1호
• /
• pp.1-10
• /
• 1998

시선물관리와 단지설계 등 소규모지역에 대한 항공사진의 필요성은 날로 증가되고 있지만 촬영시 소용되는 비용과 여러 가지 제약으로 인하여 일반 항공사진 촬영용 항공기에 의한 항공사진을 얻는 데는 많은 어려움이 따른다. 본 연구에서는 대축척 공중사진의 효율적인 획득방법의 하나로서 비측량용 카메라를 장착한 원격조종 모형비행기에 의한 사진촬영에 대하여 고찰하였다. RC모형기의 원리를 조사 연구하여 공중사진촬영에 적합합 RC모형기를 제작하였고 이를 이용하여 공중사진을 촬영하는 실험을 수행하였다.실험결과 지상시설물의 공중사진을 중복촬용할 수 있었고 모형기를 이용하여서도 일반 항공사진 촬영용 항공기의 기능을 일부 대신할 수 있음을 확인하였다.

• 대한기계학회논문집A
• /
• 제23권7호
• /
• pp.1182-1195
• /
• 1999

The purpose of this study is to investigate experimentally the effects of both seismic loading and crack length on the fracture behavior of piping system with a circumferential crack in nuclear power plants. The experiments were performed using both large scale piping system facility and 4 points bending test machine under PWR operating conditions. The difference in the load carrying capacities between cracked piping and non-cracked piping was also investigated using the results from experiments and numerical calculations. The results obtained from the experiments and estimation are as follows : (1) The safety margin under seismic loading is larger than those under quasi static loading or simple cyclic loading. (2) There was no significant effect of crack length on tincture behavior of piping system with both a surface crack and a through-wall crack. (3) The load carrying capacity in cracked piping was reduced by factors of 7 to 46 compared to non-cracked piping.