• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.319-322
• /
• 2003

For the analysis of leveling process by the 3-dimensional elastic-plastic finite element method, a finite element analysis program modeling large deformation of shell has been developed. This program fur analyzing large deformation of sheet during leveling includes spring-back analysis as well as efficient contact treatment between sheet and rolls of leveler. This is verified by the simple leveling experiment with 5 rolls at laboratory. Besides the leveling examples, problems within the category of large strain and rotation, such as 3-dimensional roll-up and gutter occurrence at continuous bending-unbending process are also tested for verification of the program. The residual curvatures of strip predicted by finite element analysis are within 20% error range of the experiment. The formation and direction of anticlastic curvature or gutter during bending-unbending under tension is predicted and this agrees with the experimental results.

• 소성∙가공
• /
• 제18권7호
• /
• pp.513-518
• /
• 2009

Large load is required in forging of large-scale components which becomes a critical restriction in practice. In the present study, two methods of incremental forging were investigated for the purpose of reducing the load required for forging of large and thick plates. The forging was applied primarily to obtain fine grains by imposing large amount of plastic deformation to the plates. One was to use nine strokes with a flat die and the other was to use three strokes with a curved die. The die moves vertically in the former while it moves vertically as well as rolls horizontally in the latter. Deformation of the slab in each case was analyzed by rigid-plastic finite element method and as a result, variations of load and slab holding force, and distributions of effective strain and thickness were predicted.

• 한국해양공학회지
• /
• 제21권3호
• /
• pp.26-32
• /
• 2007

A series of large-scale experiments were carried out in order to examine wave-induced liquefaction in a loosely packed sandbed, its afterward high densification and liquefaction by oscillatory pore pressure. The experiments were conducted in a Large Hydro-Geo Flume that can nearly solve the problems of scale effects of the sandbed, and the 50% sieve diameter of sand was 0.2 mm. The generation of residual pore pressure and its afterward high densification which had observed by Takahashi et al. (1999) in a wave flume experiment using fine sand with the size of 0.08 mm. As a result, the relative density of the sandbed after high densification was increased up to 79% and liquefaction by oscillatory pore pressure was not observed.

• 한국공작기계학회논문집
• /
• 제14권3호
• /
• pp.47-53
• /
• 2005

The non-linear finite element program of the large deformation analysis by computer simulation has been used in the prediction and evaluation of the behaviors of the non-linear rubber components. The analysis of rubber components requires the tools modelling the special materials that are quite different from those used for the metallic parts. The nonlinear simulation analysis used in this study is expected to be widely applied in the design analysis and the development of several rubber components which are used In the manufacturing process of many industries. By utilizing this method, the time and cost can also be saved in developing the new rubber product. The objective of this study is to analyze the rubber component with the large deformation and non-linear properties.

• Structural Engineering and Mechanics
• /
• 제51권6호
• /
• pp.955-971
• /
• 2014

Large post-buckling behavior of Timoshenko beams subjected to non-follower axial compression loads are studied in this paper by using the total Lagrangian Timoshenko beam element approximation. Two types of support conditions for the beams are considered. In the case of beams subjected to compression loads, load rise causes compressible forces end therefore buckling and post-buckling phenomena occurs. It is known that post-buckling problems are geometrically nonlinear problems. The considered highly non-linear problem is solved considering full geometric non-linearity by using incremental displacement-based finite element method in conjunction with Newton-Raphson iteration method. There is no restriction on the magnitudes of deflections and rotations in contradistinction to von-Karman strain displacement relations of the beam. The beams considered in numerical examples are made of lower-Carbon Steel. In the study, the relationships between deflections, rotational angles, critical buckling loads, post-buckling configuration, Cauchy stress of the beams and load rising are illustrated in detail in post-buckling case.

• Structural Engineering and Mechanics
• /
• 제43권2호
• /
• pp.211-223
• /
• 2012

This paper deals with large deformation post-buckling of a linear-elastic and hygrothermal beam with axially nonmovable pinned-pinned ends and subjected to a significant increase in swelling by an alternative method. Analytical approximate solutions for the geometrically nonlinear problem are presented. The solution for the limiting case of a string is also obtained. By coupling of the well-known Maclaurin series expansion and orthogonal Chebyshev polynomials, the governing differential equation with sinusoidal nonlinearity can be reduced to form a cubic-nonlinear equation, and supplementary condition with cosinoidal nonlinearity can also be simplified to be a polynomial integral equation. Analytical approximations to the resulting boundary condition problem are established by combining the Newton's method with the method of harmonic balance. Two approximate formulae for load along axis, potential strain for free hygrothermal expansion and periodic solution are established for small as well as large angle of rotation at the end of the beam. Illustrative examples are selected and compared to "reference" solution obtained by the shooting method to substantiate the accuracy and correctness of the approximate analytical approach.

• 한국응용곤충학회지
• /
• 제35권4호
• /
• pp.315-320
• /
• 1996

Drosophila의 actin 5C 유전자 promoter에 쥐의 DNA polymerase $\beta$cDNA를 도입시킨 형질전환 초파리가 고감수성 환경성 변이원 검출계로 사용할 수 있는지를 조사하였다. 체세포 염색체 재조환과 체세포 염색체 돌연변이의 검출을 위해서는 geterozygous(mwh/+) 계통을 사용하였다. 염색체상의 결실이나 비분리 등에 의한 small mwh spot의 자연 발생적 빈도는 non-transgenic w 계통과 transgenic p[pol $\beta$]-130 계통에서 각각 0.351 및 0.606 정도였다. 체세포 염색체 재조환에 의한 large mwh spot의 자연 발생적 빈도의 경우는 transgenic p[pol $\beta$]-130 계통(0.063)이 non-transgenic w 계통(0.021)에 비해 약 3배 정도 높게 나타났다. IQ, Glu-P-1 및 {TEX}$AFB_{1}${/TEX} 등의 돌연변이원의 처리에 의한 경우, 두 종류의 mutant clone의 발생 빈도는 쥐의 DNA polymerase $\beta$가 도입된 transgenic p[pol $\beta$]-130 계통이 non-transgenic w 계통에 비하여 모두 약 2-3배 정도 높게 나타났다. 본 연구의 결과는 쥐의 DNA polymerase $\beta$가 최소한 체세포 염색체 돌연변이 유발이나 체세포 염색체 재조환의 생성 과정에 관여함을 의미하며, 형질전환 초파리 계통이 환경성 변이원 검출계로서 충분한 응용가능성이 있음을 보여 주었다.

• 한국재료학회지
• /
• 제31권10호
• /
• pp.562-568
• /
• 2021

(Bi_1/2Na_1/2)TiO₃ (BNT)-based ceramics are considered promising candidates for actuator application owing to their excellent electromechanical strain properties However, to obtain large strain properties, there remain several issues such as thermal stability and high operating fields. Therefore, this study investigates a reduction of operating field in (0.98-x)Bi_1/2Na_1/2TiO₃-0.02 BiAlO₃-xSrTiO₃ (BNT-2BA-100xST, x = 0.20, 0.21, 0.22, 0.23, and 0.24) via analyses of the microstructure, crystal structure, dielectric, polarization, ferroelectric and electromechanical strain properties. The average grain size of BNT-${\underline{2}}$BA-100xST ceramics decreases with increasing ST content. Results of polarization and electromechanical strain properties indicate that a ferroelectric to relaxor state transition is induced by ST modification. As a consequence, a large electromechanical strain of 592 pm/V is obtained at a relatively low electric field of 4 kV/mm in 22 mol% ST-modified BNT-2BA ceramics. We believe that the materials synthesized in this study are promising candidates for actuator applications.

• 한국지반공학회논문집
• /
• 제26권3호
• /
• pp.5-12
• /
• 2010

본 연구에서는 지진후의 침하에 미치는 반복 전단방향의 영향을 명확히 하기 위해， 일본의 표준사인 Toyoura sand와 천연모래인 Genkai sand 및 고로수쇄슬래그(GBFS)에 대해서 다축(다방향) 전단실험을 수행하였다. 공시체는 높이 75mm, 직경 20mm이다. 일련의 실험에서, 변형률 반복 재하회수 n=5, 20, 30, 100, 200회로 변화시켜 행하였으며, 전단변형률 진폭은 0.1%에서 1.0%까지 변화시켰다. 각 공시체의 상대밀도는 50, 60, 70%를 대상으로 하였다. Toyoura sand와 고로수쇄슬래그에 대한 실험결과로부터, 반복전단후의 침하는 상대밀도가 작을수록 크게 되며, 전단변형률 진폭의 증가와 더불어 크게 나타났다. 반복전단 방향의 차이에 따른 영향이 감소한 후에 Toyoura sand의 전단후의 침하는 일정치에 수렴하지만, 고로수쇄슬래그는 반복전단회수의 증가와 더불어 증가되었다. 또한, 반복전단후의 침하는 Kaolinite > Toyoura sand > Genkai sand > GBFS의 순으로 나타났다.

• 한국항공우주학회지
• /
• 제43권5호
• /
• pp.396-404
• /
• 2015

무인기의 날개는 고고도 장기체류에 적합하도록 가로세로비가 크며, 비행 중 구조 대변형이 발생한다. 비행 중 날개 구조의 실시간 변형 상태 파악을 위해 변위-변형률 관계를 이용하여 비행체의 구조 건전성 및 관련 하중 상태 평가, 이상 진동 현상 발견 및 조종성 향상과 같은 영역에서 활용할 수 있다. 본 논문에서는 비행 중 변형이 발생하는 날개 구조물을 외팔보로 가정하여 구조 대변형을 보다 간편하게 예측하기 위한 변형률 기반의 비선형성을 고려한 변위 예측 알고리즘을 작성하였다. 변위 예측식은 외팔보의 다양한 끝단 변위 조건에서 이루어진 구조 실험과 유한요소 해석 결과의 비교를 통하여 검증하였다. 변형률은 스트레인 게이지로부터 취득한 값을 사용하였으며, 변형률을 이용하여 예측된 변위는 레이저 변위 센서로 측정한 변위와 잘 일치하였다.