• 대한기계학회논문집
• /
• 제15권1호
• /
• pp.285-291
• /
• 1991

본 연구에서는 800 1pm인 대유량을 처리하고 공기중 1.8~4.5$\mu\textrm{m}$ 입자를 효율 적으로 선별하여 농축시키는 슬릿형 2단 가상충돌기를 설계 제작하고 그 성능이 평가 되었다. 즉, 첫째단과 둘째단에서 4.5$\mu\textrm{m}$과 1.8$\mu\textrm{m}$이 각각 50%의 효율로 분리되도록 설계되었다. 즉, 첫째단과 둘째단에서 4.5$\mu\textrm{m}$과 1.8$\mu\textrm{m}$이 각각 50%의 효율로 분리되도 록 설계한다. 설계인자(design parameter)들을 결정하기 위하여 먼저 슬릿형 노즐의 1단 가상충돌기의 분리효율(separation efficiency)에 대한 실험을 통하여 50% 커트오 프 Stokes수를 구하고, 이를 기초로 하여 2단 가상 충돌기의 주요치수와 작동조건을 결정하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제18권5호
• /
• pp.56-67
• /
• 1994

The installation methods of diesel engines in ships would be largely classified into two groups : one is the direct mounting system fixing engine directly into double bottom of the hull, and the other is the resilient mounting system having vibration absorbers between engine and ship body such as rubber plate to prevent shocks or vibration transmission. The direct mounting system is generally used for large-sized low speed diesel engines, because the resilient mounting system has difficulties in reducing the natural frequency of engine itself under normal speed. On the contrary, the resilient mounting system is often used for medium or high speed engines for marine propulsion and generator that have light weight and high revolution speed. Recently, it is even applied to engines having relatively low speed(300-400rpm) for fishing boats. Although many researches for the resilient mounting system have been carried out, many problems in applying these results directly to marine vessels because most of these have been used for automobiles. Up to now we have had to depend on the professional foreign company in design and the supply of parts for the resilient mounting system of marinediesel engines utterly. In preseut study, the exciting forces of engines effecting to resilient mounting were examined, and patterns of vibration and evaluation procedure for force transmission from resilient mounting to the body of hull were established. Also, these results were applied to the analysis of free and forced vibration for the rubber-type resilient mounting systems of marine diesel engines. Besides, after changing the various design parameters, such as locations, angles, dynamic characteristics and the number of resilient mountings, the influences on resilient mounting system were also examined.

• 비파괴검사학회지
• /
• 제14권1호
• /
• pp.16-22
• /
• 1994

일반적으로 구름 베어링 시스템에 비해 발전용 터어빈이나 내연기관 엔진과 같은 저어널 베어링을 가진 시스템은 상대적으로 대형 설비이거나 더 가혹한 운전조건에서 가동되는 경우가 많다. 이런 회전기계류에서의 베어링의 파손은 설비의 운전 중단 및 관련 설비의 파손까지도 초래할 수 있게 된다. 따라서 이로 인한 보수에 소비되는 시간 및 경제적인 손실등을 피하기 위해서는 저어널 베어링의 조기파손 감지의,역할은 매우 중요하게 된다. 본 연구에서는 음향방출 기술을 이용하여 베어링에서 발생할 수 있는 파손의 조기검출을 위해 실험실용으로 직접 제작한 저어널 베어링 시스템을 이용하여 여러 형태의 비정상 조건을 만들어 가며 실험을 행하였다. 베어링 손상 및 피로의 주 요인으로서는 윤활유 부족, 윤활층에의 이물질의 혼입, 조립 불량 등이 대표적인 원인으로서 알려져 있으며 이에 근거하여 실험 조건을 윤활유에의 이물질 혼입, 윤활유 부족, 그리고 축과 베어링간의 금속간 접촉등의 인위적인 형태로 구성하여 실험하였다. 그 결과로서 음향방출 기술이 저어널 베어링의 조기파손 감지에 매우 효과적인 도구라는 것을 입증하였다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.143-148
• /
• 2005

The main purpose of this study is to suggest and evaluate an operational method for assessing the potential impact of climate change on hydrologic components and water resources of regional scale river basins. The method, which uses large scale climate change information provided by a state of the art general circulation model(GCM) comprises a statistical downscaling approach and a spatially distributed hydrological model applied to a river basin located in Korea. First, we construct global climate change scenarios using the YONU GCM control run and transient experiments, then transform the YONU GCM grid-box predictions with coarse resolution of climate change into the site-specific values by statistical downscaling techniques. The values are used to modify the parameters of the stochastic weather generator model for the simulation of the site-specific daily weather time series. The weather series fed into a semi-distributed hydrological model called SLURP to simulate the streamflows associated with other water resources for the condition of $2CO_2$. This approach is applied to the Yongdam dam basin in southern part of Korea. The results show that under the condition of $2CO_2$, about $7.6\% of annual mean streamflow is reduced when it is compared with the observed one. And while Seasonal streamflows in the winter and autumn are increased, a streamflow in the summer is decreased. However, the seasonality of the simulated series is similar to the observed pattern and the analysis of the duration cure shows the mean of averaged low flow is increased while the averaged wet and normal flow are decreased for the climate change.

• 조명전기설비학회논문지
• /
• 제23권1호
• /
• pp.59-68
• /
• 2009

분산진원으로서 연료전지 발전장치는 100w부터 수백[kw]의 용량을 가지며 종전의 대규모 전력설비와 비교하여 높은 신뢰도를 갖는 고품질의 전력을 공급할 수 있다. 본 연구에서는 소형 분산전원으로서 PEMFC(polymer electrolyte membrane fuel cell)연료전지 발전장치에 대한 PSIM(power electronics simulation tool) 모델을 설정하고 이를 바탕으로 DSP(digital signal processor)기반의 연료전지 하드웨어 시뮬레이터를 구현하였다. 연료전지 전류와 출력전압과의 관계는 연료전지의 전압-전류(V-I) 곡선 중 ohmic영역에서 1차 함수로 간략화 하였다. 구현된 시스템은 PEMFC 하드웨어 시뮬레이터, 절연형 풀 브리지 직류 부스트 컨버터 그리고 60[Hz] PWM인버터로 구성되어있다. 부하변동 및 과도상태에 대한 연료전지 하드웨어 시뮬레이터의 전압-전류-전력(V-I-P) 특성을 파악하였으며, 저항 부하 및 비선형 부하에 대한 전력변환기의 60[Hz] 정현파 교류출력 전압파형을 고찰하였다.

• Smart Structures and Systems
• /
• 제8권1호
• /
• pp.139-155
• /
• 2011

Polymeric thin-film assemblies whose bulk electrical conductivity and mechanical performance have been enhanced by single-walled carbon nanotubes are proposed for measuring strain and corrosion activity in metallic structural systems. Similar to the dermatological system found in animals, the proposed self-sensing thin-film assembly supports spatial strain and pH sensing via localized changes in electrical conductivity. Specifically, electrical impedance tomography (EIT) is used to create detailed mappings of film conductivity over its complete surface area using electrical measurements taken at the film boundary. While EIT is a powerful means of mapping the sensing skin's spatial response, it requires a data acquisition system capable of taking electrical impedance measurements on a large number of electrodes. A low-cost wireless impedance analyzer is proposed to fully automate EIT data acquisition. The key attribute of the device is a flexible sinusoidal waveform generator capable of generating regulated current signals with frequencies from near-DC to 20 MHz. Furthermore, a multiplexed sensing interface offers 32 addressable channels from which voltage measurements can be made. A wireless interface is included to eliminate the cumbersome wiring often required for data acquisition in a structure. The functionality of the wireless impedance analyzer is illustrated on an experimental setup with the system used for automated acquisition of electrical impedance measurements taken on the boundary of a bio-inspired sensing skin recently proposed for structural health monitoring.

• 한국정보처리학회논문지
• /
• 제4권5호
• /
• pp.1371-1379
• /
• 1997

본 논문에서는 순차화로에서의 시험 불가능 고장을 찾는 새로운 알고리즘을 제시 하였다. 이 알고리즘에서는 초기화가 불가능한 플플롭을 먼저 찾으면서 이 과정에서 이 플립플롭의 초기화를 막는 고장, FPI를 찾고 이 고장의 전파 경로를 검색한다. 또한 이 알고리즘을 ISCA889 벤츠마크 회로를 대상으로 적용하여 시험 불가능한 FPI의 갯수를 제시하였다. 테스트 생성에 소요되는 시간의 대부분이 시험 불가능고장의 검출에 사용 되는 것을 고려할 때, 이 알고리즘을 테스트 생성기의 전처리 과정으로 사용하면, 테스트 생성기의 효율을 크게 높일 것으로 기대된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1571-1576
• /
• 2005

DCS has many processing components and various communication elements. And its communication delay characteristic is affected diverse operating situation and context. Especially, binding signal which traversed from one control-node to another control-node undergo all sort of delay conditions. So its delay value has large deviation with the lapse of time, and the measurement of delay statistics during long time is very difficult by using general oscilloscope or other normal instruments. This thesis introduces the design and implementation of PC-based BDAS(Binding Delay Analysis System) System developed to overcomes these hardships. The system has signal-generator, IO-card, data-acquisition module, delay-calculation and analyzer module, those are implemented on industrial standard PC/Ethernet hardware and Windows/Linux platforms. This system can detect accurate whole-system-wide delay time including io, control processing and network delay, in the resolution of msec unit, and can analyze each channel's delay-historic data which is maintained by realtime database. So, this system has strong points of open system architecture, for example, user-friendly environment, low cost, high compatibility, simplicity of maintenance and high extension ability. Of all things, the measuring capability of long-time delay-statistics obtained through historic-DB make the system more valuable and useful, which function is essential to analyze accurate delay performance of DCS system. Using this system, the verification of delay performance of DCS for nuclear power plants is succeeded in KNICS(Korea Nuclear Instrumentation & Control System) projects

• 한국인터넷방송통신학회논문지
• /
• 제20권3호
• /
• pp.121-127
• /
• 2020

소형 추적 레이다는 저속으로 기동 중인 큰 RCS를 갖는 바다위의 함정 표적 및 고속으로 기동하는 작은 RCS를 갖는 항공기(전투기, 무인기, 헬기 등)에 대하여 빠른 김발구동으로 표적을 향하고 실시간으로 표적을 탐색/ 탐지 하여 추적하는 펄스 방식의 레이더이다. 추적 레이다를 실제 환경에서 성능시험을 수행하는 것은 많은 비용이 발생을 한다. 또한 실제 환경에서는 성능을 정량적으로 측정하기가 어렵다. 본 논문에서는 소형 추적 레이다의 성능을 확인하기 위한 실험실 환경의 종합성능시험 시설의 구성과 각 구성의 주요 요구사항 및 구현에 대하여 설명한다. 실 환경을 모사하기 위한 무반향 챔버, 실 표적의 신호를 모사하기 위한 모의표적발생부, 표적의 이동을 모의하기 위한 혼안테나 구동장치, 추적레이다의 비행환경을 모사하기 위한 FMS(Flight Motion Simulatior)로 구성되며 각각의 설계와 구현에 대하여 설명하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권2호
• /
• pp.217-224
• /
• 2014

We have developed the novel device that can extract energy from ocean waves utilizing the heaving motion of a floating mass. The major components of the energy converter are: a floater, a counterweight, a cable, a driving pulley, two idler pulleys, a ratchet, and a generator. The device generates power through the tension force in the cable and the weight difference between the floater and the counterweight. When the system is at static free condition, the tension in the cable is equal to the weight of the counterweight which is minimum. Therefore it is desirable to keep the counterweight lighter than the floater. However, experiments show that during the rise of the water level, the torque generated by weight of the counterweight is insufficient to rotate the driving pulley which causes the cable on the floater side to slack. The proposed application of the tension pulley rectifies these problems by preventing the cable from becoming slack when the water level rises. In this paper, the dynamics model is modified to incorporate the dynamics of the tension pulley. This has been achieved by first writing the dynamical equations for the tension pulley and the energy converter separately and combining them later. This paper investigates numerically the effect of the tension pulley on various physical quantities such as the cable tension, the floater displacement, and the floater velocity. Results obtained indicate that this application is successful in suppressing large fluctuations of the cable tension.