• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2003.04a
• /
• pp.61-62
• /
• 2003

Clonal propagation of high-value forest trees through somatic embryogenesis (SE) has the potential to rapidly capture the benefits of breeding or genetic engineering programs and to improve raw material uniformity and quality. A major barrier to the commercialization of this technology is the low quality of the resulting embryos. Several factors limit commercialization of SE for Corsican pine, including low initiation rates, low culture survival, culture decline causing low or no embryo production, and inability of somatic embryos to fully mature, resulting in low germination and reduced vigour of somatic seedlings. The objective was to develop a Corsican pine maturation medium that would produce cotyledonary embryos capable of germination. Treatments were arranged in a completely randomized design. Data were analyzed by analysis of variance, and significant differences between treatments determined by multiple range test at P=0.05. Corsican pine (Pinus nigra var. maritima) cultures were initiated on modified !P6 medium. Modifications of the same media were used for culture multiplication and maintenance. Embryogenic cultures were maintained on the same medium semi solidified with 2.5 g/l Gelrite. A maturation medium, capable of promoting the development of Corsican pine somatic embryos that can germinate, is a combination of iP6 modified salts, 2% maltose, 13% polyethylene glycol (PEG), 5 mg!l abscisic acid (ABA), and 2.5 g/l Gelrite. After initiation and once enough tissue developed they were grown in liquid medium. Embryogenic cell suspensions were established by adding 0.951.05 g of 10- to 14-day-old semisolid-grown embryogenic tissue to 9 ml of liquid maintenance media in a 250ml Erlenmeyer flask. Cultures were then incubated in the dark at 2022$^{\circ}$C and rotated at 120 rpm. After 2.53 months on maturation medium, somatic embryos were selected that exhibited normal embryo shape. Ten embryos were placed horizontally on 20 ml of either germination medium ($\frac{2}{1}$strength Murashige and Skoog (1962) salts with 2.5 g/l activated charcoal) or same medium with copper sulphate adjusted to 0.25 mg/1 to compensate for copper adsorption by activated carbon. 2% and 4% maltose was substituted by 7.5% and 13% PEG respectively to improve the yield of the embryos. Substitution of' maltose with PEG was clearly beneficial to embryo development. When 2% of the maltose was replaced with 7.5% PEG, many embryos developed to large bullet-shaped embryos. At latter stages of development most embryos callused and stopped development. A few short, barrel-shaped cotyledonary embryos formed that were covered by callus on the sides and base. When 4% of the maltose was removed and substituted with 13% PEG, the embryos developed further, emerging from the callus and increasing yield slightly. Microscopic examination of the cultures showed differing morphologies, varying from mostly single cells or clumps to well-formed somatic embryos that resembled early zygotic embryos only liquid cultures with organized early-stag. A procedure for converting and acclimating germinants to growth in soil and greenhouse conditions is also tested. Seedling conversion and growth were highly related to the quality of the germinant at the time of planting. Germinants with larger shoots, longer, straighter hypocotyls and longer roots performed best. When mature zygotic embryos germinate the root emerges, before or coincident with the shoot. In contrast, somatic embryos germinate in reverse sequence, with the cotyledons greening first, then shoot emergence and then, much later, if at all, the appearance of the root. Somatic seedlings, produced from the maturation medium, showed 100% survival when planted in a field setting. Somatic seedlings showed normal yearly growth relative to standard seedlings from natural seed.

• Journal of the Korean earth science society
• /
• v.30 no.2
• /
• pp.196-209
• /
• 2009

Occurrences of sandstorms in the deserts and loess of Mongolia and northern China and associated dustfall episodes in the Korean Peninsula were monitored during the period January through December, 2005. False colour images were made by directly receiving the NOAA Advanced Very High Resolution Radiometer (AVHRR) data, and the distribution and transport of sandstorms were analyzed. The ground concentrations for PM10, PM2.5 and visibility of the dustfall episodes (PM10 concentration over $190{\mu}g\;m^{-3}$) were analyzed at Cheongwon, located midway in South Korea, and in the leeward direction of the place of origin of the sandstorms. Variations in the concentrations of $O_3,\;NO_2$, CO and $SO_2$ were also compared with dust concentrations in the dustfall episodes. Fewer occurrences of strong sandstorms in the place of origin were observed in 2005, due largely to the accumulation of snow and mild fluctuations of high and low pressure systems in the place of origin, thereby accounting for a low frequency of dustfall episodes in Korea, compared with those during the period 1997-2005. A total of 7 dustfall episodes were monitored in Korea in 2005 that lasted 11 days. In summer, sandstorms occurred less frequently in the source region in 2005 due to high humidity and milder winds, thereby causing no dustfall episodes in Korea. In case the sandstorms occurring at the place of source head directly to Korea without passing through large cities and industrial areas of China, the PM2.5 concentrations were measured at 20% or lower than the PM10 concentrations. However, when the sandstorms headed to Korea via the industrial areas of eastern China, where they pick up anthropogenic air pollutants, the PM2.5 concentrations were at least 25% higher of the PM10 concentrations. On the other hand, over 5 cases were observed and analyzed in 2005 where the PM10 concentrations of sand dust originating from the deserts were measured at $190{\mu}g\;m^{-3}$ or lower, falling short of the level of a dustfall episode.

• The Korean Journal of Financial Management
• /
• v.27 no.1
• /
• pp.181-208
• /
• 2010

In July 2007, Korean government has passed "The Capital Market and Financial Investment Services Act" to further develop the capital markets and the Act was to become effective in February 2009. Using a large sample of Korean firms, we have examined (i) the effect of underwriting activities on the firm value (bond spread) comparing commercial bank and investment bank, and (ii) the determinants of the firm value changes following underwriting activities of bank. To test our goal, we collected a wide range of samples of data for bond issuing activities executed by Korean firms listed on the Korea Stock Exchange (KSE) between 2000 and 2003. Our paper is distinguished from previous studies on this subject in a way that we analyzed the effect of corporate bond underwriting activities with regard to commercial banking and investment banking. Initially, we set up a hypothesis that "Certification View" and "Conflict-of-interest View" are major driving forces behind cross-firm differences in performance following bond issuance. We find that, in general, underwriting by investment bank (securities company) brings a positive effect on the firm value (spread between bench mark rate and bond issuing rate). This result indicates that firm value has been negatively affected by the bank underwriting and provides the evidence for "Conflict-of-interest View" in Korea. Our studies have also revealed that any change in firm value following bond issuance is positively related with the firm size (total asset), operating performance, liquidity (cashflow), and equity ownership by foreign investors. Overall, our results support the view that bank underwriting activities can play an important role in determining firm value and financial strategies under "The Capital Market and Financial Investment Services Act" of 2007.

• Journal of Environmental Health Sciences
• /
• v.10 no.2
• /
• pp.9-40
• /
• 1984

This thesis purports to overview the diverse administrative and organizational factors and plannings developed by the government organizations, municipal or otherwise, to tackle the Han River water pollution issues in the past years. This thesis also looks into the ever-worsening Han River water pollution problems, in particular, in terms of the various government plans ostensibly designed to reduce the pollution level but with little success. Also dealt with are the efficiencies with which the laws and decrees on water pollution the administrative organizations put to use in the prosecution of the diverse antiwater pollution projects involving the Han River basin. From the early 1960's up to the 1970's the government had concentrated on the growth-oriented economic policy with the result that little attention had been paid to the water pollution and other environmental issues that are bound to arise from the massive economic growth. Belatedly, the five-year Hah River Development Project was initiated in 1982 with emphasis on reducing the water pollution level at Hah River to the minimum. The following are the gists of the thesis and recommendations for the future antiwater pollution plans by the administrative organizations: 1. Documents to date indicate that the irrigation projects along the Han River area had been the main focus of attention during the Yi Dynasty and under the Japanese rule of the country. 2. Despite that the water pollution issue became the subject of many debates among the academic and research institutions in the 1960's and in the 1970's, the administrative organizations in charge of the Han River water quality control failed to come up with a concrete plan for the river's water quality control. 3. Nevertheless, the water pollution of the Han River area in fact began in the 1950's, with the unprecedented concentration into Seoul of population and the industrial facilities on a larger scale, in particular, enforced by the government's strong growthoriented policy in its Economic Development plans in the 1960's. 4. Starting in the 1960's, the Han River water pollution level dramatically increased, but the government was reluctant to promulgate or put into effect strong measures to curb the many factors contributing to the river water pollution, thus worsening the environmental issues along the Han River basin. 5. The environmental protection law and other laws and decrees relating to the antiwater and air pollution issues that were subsequently put into effect underwent so many changes that efficient anti-water pollution policies could not be effected for the Han River basin. The frequent organizational reshuffle within the administrative units concerned with environmental problems has resulted in the undue waste in personnel management and finance. 6. The administration on the environmental protection could not be efficiently carried out due to the organizational overlapping. Under the existing law, frequent organizational frictions and inefficiency are bound to occur among the central government offices themselves, as well as between the central government and the Seoul city administration, and among the city's administrative offices over the conservation of the Han River basin and over the river's anti-water pollution issue. 7. In the planning and prosecution of the Han River project, political influences from the president down to the lower-level politicious appear to have been involved. These political influences in the past had certainly had negative influence on the project, nevertheless, it appears that in the recent years, these political influences are not all that negative in view of the fact that they serve as a positive contributing factor in developing a better water quality control project along the Han River basin. The following are a few recommendations based on the data from the thesis: First, officials in charge of the Han River water quality control should pay attention to a careful screening of the opinions and recommendations from the academic circles and from the public should be made so that the government could better grasp the core issues in the environmental problems that require preventive and other necessary measures. Second, vigorous redistribution policies of population and industrial facilities away from the Seoul area should be pursued. Third, the government should refrain from revising or revamping too frequently the laws and decrees on the anti-water pollution, which is feared to cause undue inconveniences in the environmental administration. Fourth, a large-scale streamlining should be made to the existing administrative organization in an effort to do away with the inter- and intra-organizational friction. It is recommended that a secretariat for the Hah River basis conservation be established. Fifth, High-level administrative officials, with a thorough knowledge and vision on the Han River water quality control, should be prepared to better deal with the budgeting and personnel management for the Han River water pollution control not only at the control government, but also at the Seoul city municipal government levels. Environmental issues should be kept distinct from political issues. Environmental issues should not serve as a window-dressing for sheer political purposes. Sixth, the Hah River proiect should also include, along with the main Han River basin, those areas covering North Han River, South Han River, and the tributaries to the main river basin. The 'Han River Basin Water Quality Control Board' should be established immediately as a means of strengthening the current Han River basin water quality control policy. Seventh, in drawing up the Han River proiect, the administrative officials should be aware that Han River basin is a life line for those people in the region, providing them with not only a sheer physical space, but with a psychological living space for their everyday life.

• Tuberculosis and Respiratory Diseases
• /
• v.58 no.6
• /
• pp.570-575
• /
• 2005

Introduction : Diffuse interstitial lung diseases (DILD) comprise of a large group of lung diseases with diverse etiologies. They are classified into four categories based on the etiology and pathological findings. In Korea, epidemiological data on DILD has never been reported in a prospective manner. Method : From May 2002 to April 2004, total 487 patients with DILD were prospectively registered at Samsung Medical Center. The prospective observational analysis of the etiologies, its classification based on 2002 ATS/ERS (American Thoracic Society/European Respiratory Society) guidelines, as well as diagnostic tests and the retrospective analysis of the treatment modalities were carried out. Any infectious and malignant causes were excluded. Results : 1) The patients were classified into idiopathic interstitial pneumonia (IIP) in 269 patients (55.2%), known causes of DILD in 168 patients (34.5%), sarcoidosis in 27 patients (5.5%), other forms of DILD in 14 patients (2.9%), and undetermined DILD in 9 patients (1.9%). 2) The diagnostic test showed that most patients had undergone chest high resolution computed tomography (HRCT) and pulmonary function test (PFT) (97%, 89%). Transbronchial lung biopsy (TBLB) and surgical lung biopsy (SLB) were performed in limited patients (38%, 29%). 3) Among 269 patients with IIP, 220 (82%) had idiopathic pulmonary fibrosis (IPF) while 23 (9%) had nonspecific interstitial pneumonia. SLB was carried out in 36% of patients with IIP. 4) Symptomatic supportive care was given to 67% of IPF, but specific medical treatment including corticosteroids was administered to 89% of non-IPF patients. Conclusion : A nationwide registry of DILD patients is required to determine the annual incidence, etiology, and practice pattern of diagnosis and treatment in Korea.

• 대한공업교육학회지
• /
• v.44 no.2
• /
• pp.104-122
• /
• 2019

In the era of the fourth industrial revolution, maker education is drawing attention as a method of student-led education. At a time when interest in maker education is also growing in technology education, figuring out what stage of concern(SoC) a middle school technology teacher is critical to effective implementation. This study analyzed SoC in maker education by layer sampling among 400 middle school technology teachers using Concerns-based adoption model. SoC was then obtained by measuring the origin using the SoCQ and then presenting it as a SOCQ profile. Gender, training experience with two lower variables were analyzed using t verification, working cities, teaching experience with more than three lower variables were analyzed using one-way ANOVA. Studies showed that SoC in maker education of middle school technology teachers showed the most similar characteristics to that of non-users. The difference in concern depending on gender was that male teachers were more concerned in maker education than female teachers. The difference in concern depending on the working city was that teachers working in the township were more concerned in the maker education than teachers working in the large city, and the difference in concern depending on the teaching career was higher among teachers with middle experience than those with low and high experience. There was also a higher stage of concern in maker education than in teachers without training experience. Therefore, it is necessary to provide middle school technology teachers with an introduction to the maker education and various information, teaching, learning and evaluation data to enhance overall concern and to support the use and evaluation of the maker education in the classroom by providing various teacher training and consulting on the maker education in the future. Further, through further study, we should conduct study that analyzes both Stage of Concern, Level of Use and Innovation Configuration, to put in the effort for effective settlement of maker education.

• Journal of the Korean Society of Safety
• /
• v.10 no.3
• /
• pp.81-95
• /
• 1995

Now, safety assurance in construction sites should be accomplished by its own organization rather than control of the code or government. It is believed that the safety assurance can be considerably improved by a lecture or an education using the existing theories or literatures up to now, but it is thought that fundamental safety assurance we not able to be accomplished without developing safety devices '||'&'||' equipment or taking fundamental measures, based on the result analyzed from workers behaviors. There are various behaviors of the workers showed in construction site, but only tests for hammerusing works such as form, re-bar, stone workers directly related to the grip strength are mainly performed, investigated and measured here for the study. The above works are similar to power grip, 7th picture on seven items which are categorized for hand grip types(Ammermin 1956 ; Jones ; Kobrick 1958). Measurements of grip strength are commonly taken in anthropometric surveys. They are easy to administer but unfortunately it is rather dubious whether they yield any data that are of interest to the engineer. Very fewer controls of tools are grasped and squeesed studies showed very little overall correlation between grip strength and other measures of bodily strength (Laubach, Kromer, and Thordsen 1972), but hammer-using work which is practically progressed in construction site are mainly influenced with grip strength. According to the investigation on work measurement, it is shown that 77% of form worker are using hammer to be related to grip strength. In this study, it is particularly noticed that wearing safety gloves in construction site is required for workers safety but 20% difference between grip strength with safety gloves and without ones are commonly neglected in the site(Fig. 1). Nevertheless, safety operation with consideration of the above 20% difference is not considered in the construction site. Factors of age, kinds of work, working time, with or without safety gloves are in vestigated '||'&'||' collected at the sites for this study. Test, not at each working hour but at 14 : 00 when the almost all of the workers think the most tired, resulting from the questionaires, also when it is shown on the research report has been performed and compared for main kinds of works : form '||'&'||' re-bar work. Tests were performed with both left SE rightand of the workers simultaneously in construction site using Rand Dynamometer(Model 78010, Lafayette Instrument Co., Indiana, U.S.A) by reading grip strength on the gauge while they are pulling, and then by interviewing on their ages, works, experiences and etc., directly. The above tests have been performed for the dates of 15th march-26th May '95 with consideration of site condition. And even if various factors of ambient temperature on the testing date, working condition, individual worker's habit and worker's condition of the previous ate are concerned with the study. Those are considered as constants in this study. Samples are formwork 53, rebar 62, electrician 5, plumber 4, welding 1 from D construction Co., Ltd, ; formwork 12, re-bar 5, electrician 2, from S construction Co., Ltd, , formwork 78, re-bar 18, plumber 31, electrician 13, labor 48, plumber 31, plasterer 15, concrete placer 6, water proof worker 3, maisony 5 from B construction Co., Ltd. As In the previously mentioned, main aspect to be investigated in this study will be from '||'&'||' re-bar work because grip strength will be directly applied to these two kinds of works ; form '||'&'||' re-bar work, eventhough there are total 405 samples taken. It is thought that a frequency of accident occurrence will be mainly two work postures "looking up '||'&'||' looking down" to be mainly sorted, but this factor is not clarified in this study because It will be needed a lot of work more. Tests has been done at possible large scale of horizontally work-extended sites within one hour in order to prevent or decrease errors '||'&'||' discrepancies from time lag of the test. Additionally, the statistical package computer program SPSS PC＋has been used for the study.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.38 no.2
• /
• pp.95-107
• /
• 2020

The purpose of this study is to provide the basic data by analyzing and analysing the Growth Conditions of old Trees in Yangdong village. This study investigated about the conducted on tree information, soil information, and tree health. The result are as follows. The trees information in Yangdong Village consists of Juniperus chinensis, Salix chaenomeloides, Salix pseudolasiogyne, Celtis sinensis, Zelkova serrata, Gleditsia japonica, and Gleditsia sinensis trees, The range of height was 4.0~17.0m, and the diameter was 0.51~1.34m, Juniperus chinensis trees of No.17 was most large. In the results of soil analysis, there showed that acidity was pH4.1~6.3, hardness of 5~48mm, organic matter content of 21.2~29.1g/kg, electrical conductivity(EC) of 0.34~1.76dS/m, available P₂O₅ of 79.8~451.6mg/kg, exchangeable K of 0.22~1.71cmol+/kg, exchangeable Ca of 4.98~7.44cmol+/kg, exchangeable Mg of 0.67~2.19cmol+/kg, exchangeable Na of 0.19~1.04cmol+/kg and cation exchange capacity(C.E.C) of 7.23~13.02cmol+/kg. As a result, the highest number of tree health levels is 8 of 11trees of Celtis sinensis, 2 of 7trees of Zelkova serrata, and 3 of Gleditsia sinensis, and 13 of 30 trees of health levels, The Older trees with high infection, spoil and hollowed part were the remaining trees except for the healthy part. Relatively, more than half of the number of targets is infected, decay, and the hollowed site, and it is necessary to perform surgery on the damaged area. In addition, preservation and protection measures should be implemented by supplying root nutrients for trees, controlling nutrients in the body to prevent secondary and tertiary damages that cause the infection site to metastasize to the health site, In order to continually monitor the trees, measures to improve the location environment and management of the trees should be sought.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.4
• /
• pp.317-324
• /
• 2017

The purpose of this study was to provide basic data on the genetic and environmental effects of stickiness in glutinous rice varieties. In our study, we analyzed the genotype-by-environment ($G{\times}E$) interactions of the stickiness using six glutinous rice varieties under six environmental conditions. AMMI (Additive Main Effects and Multiplicative Interaction) analysis results showed that genotype (variety, G), environment (cultivation region, E) and $G{\times}E$ interaction were highly significant (P < 0.001). Among all the variations of stickiness for glutinous rice varieties, the environmental effect was 24.5%, the genetic effect was 37.1%, and the $G{\times}E$ interaction effect was 28.9%. From the AMMI analysis, the IPCA1 scores of Aranghangchal (G6, IPCA1: 3.85) and Hwaseonchal (G4, IPCA1: -5.24) was lower than other varieties. On the other hand, the Sangjuchal (G1, IPCA1: -61.23) and Boseogchal (G2, IPCA1: 41.21) were highly affected by environmental effects. In this study, there were large differences in stickiness according to region of cultivation. In the future, it is considered that a precise study should be carried out on the environmental factors that may increase the stickiness of glutinous rice varieties.

• Economic and Environmental Geology
• /
• v.27 no.6
• /
• pp.557-561
• /
• 1994

Q estimates are made by direct measurements of energy loss per cycle from primary P and S waves, as a function of frequency. Assuming that intrinsic Q is frequency independent and scattering Q is frequency dependent over the frequencies of interest, the relative contributions of each, to a total observed Q, may be estimated. Test examples are produced by computing viscoelastic synthetic seismograms using a pseudo spectral solution with inclusion of relaxation mechanisms (for intrinsic Q) and a fractal distribution of scatterers (for scattering Q). The composite theory implies that when the total Q for S-waves is smaller than that for P-waves (the usual situation), intrinsic Q is dominating; when it is larger, scattering Q is dominating. In the inverse problem, performed by a global least squares search, intrinsic $Q_p$ and $Q_s$ estimates are reliable and unique when their absolute values are sufficiently low that their effects are measurable in the data. Large $Q_p$ and $Q_s$ have no measurable effect and hence are not resolvable. Standard deviation of velocity $({\sigma})$ and scatterer size (A) are less unique as they exhibit a tradeoff as predicted by Blair's equation. For the P-waves, intrinsic and scattering contributions are of approximately the same importance, for S-waves, the intrinsic contributions dominate.