• 한국재료학회지
• /
• 제22권11호
• /
• pp.631-635
• /
• 2012

Nickel oxide was doped with a wide range of concentrations (mol%) of Aluminum (Al) by solvothermal synthesis; single-phased nano powder of nickel oxide was generated after calcination at$900^{\circ}C$. When the concentration of Al dopant was increased, the reduced intensity was confirmed through XRD analysis. Lattice parameters of the synthesized NiO powder were decreased after treatment of the dopant; parameters were increased when the concentration of Al was over the doping limit (5 mol% Al). The binding energy of $Ni^{2+}$ was chemically shifted to $Ni^{3+}$ by doping $Al^{3+}$ ion, as confirmed by the XPS analysis. The tilted structure of the synthesized NiO with 5 mol% Al dopant and the polycrystalline structure of the $Ni_{0.75}Al_{0.25}O$ were observed by HR-TEM analysis. The electrical conductivity of the newly synthesized NiO was highly improved by Al doping in the conductivity test. The electrical conductivity values of the commercial NiO and the synthesized NiO with 5 mol% Al dopant ($Ni_{0.95}Al_{0.05}O$) were 1,400 s/cm and 2,230 s/cm at $750^{\circ}C$, respectively. However, the electrical conductivity of the synthesized NiO with 10 mol% Al dopant ($Ni_{0.9}Al_{0.1}O$) decreased due to the scattering of free-electrons caused by the large number of impurity atoms; the electrical conductivity of $Ni_{0.9}Al_{0.1}O$ was 545 s/cm at $750^{\circ}C$.

• 태양에너지
• /
• 제12권3호
• /
• pp.10-20
• /
• 1992

본 실험에서는 산업폐수, 가정폐수, 지하수 등에 오염되는 유독성 유기물 처리를 위한 태양반응시스템의 개발을 목적으로 batch형 광분해 반응시스템을 구성하여 수처리 분해 실험을 실시하였다. 실험실 규모의 batch형 반응기를 구성하여 수질 개선용 광화학 반응 활용의 기술적 타당성을 확보하고자 하였으며 다음과 같은 결론을 얻을수 있었다. (1) $TiO_2$ anatase, $TiO_2$ rutile 그리고 $V_2O_5$를 대상으로 광촉매 선정을 위한 실험결과, 본 실험조건에서는 band gap energy가 약 3.2 eV인 $TiO_2$ anatase가 유해 유기물 TCE의 가장 높은 분해율을 나타내었다. $TiO_2$ anatase의 결정구조는 XRD 관찰에 의하여 확인할 수 있었으며, BET-$N_2$ 측정결과 단위무게당 표면적은 약 7.748 $m^2/g$ 이었다. (2) $TiO_2$ anatase의 투입량이 많을수록 TCE분해율도 증가하였다. 그러나 투입량이 0.1 wt% 이상이 될 경우 분해율의 증진은 아주 미미하여서 0.1 wt%의 $TiO_2$ anatase 양을 slurry batch 형 시스템 실험에 최선으로 채택하였다. (3) $H_2O_2$의 양이 TCE 분해율에 미치는 영향을 조사한 결과 적정량은 약 0.06 volume%임을 알 수 있었다. 이는 적정량의 $H_2O_2$는 OH radical의 형성을 촉진시키지만 과량의 존재시에는 오히려 OH radical과 반응하여 이를 소모하는 역효과를 나타내기 때문이다. (4) 광반응기의 head space를 변화시키면서 산소양의 TCE 분해율에 미치는 영향을 관찰한 결과 TCE 분해반응식의 이론적 stoichiometry로나 실험적으로나 산소양이 아주 중요한 변수임을 알수 있었다.

• 한국자기학회지
• /
• 제2권1호
• /
• pp.29-36
• /
• 1992

본 연구에서는 장래의 전자공업 및 정보산업의 기본소재로서 그 응용이 기대되고 있는비정질 산화물자성체를 개발하기 위한 기초연구를 수행하였다. 현재 연구보고 되어 있는 강자성비정질 산화물은 같은 조성의 다결정 ferrite에 비하여 그 자성이 빈약하므로 자성이 좀더 강한비정질 spinel ferrite의 개발이 요구된다. 자체 제작한 쌍 roller 초급내장치로써 $CaO-B_{2}O_{3}$ 계 amorphous ferrite 시료를 제조하고 얻어진 시편의 제특성을 조사하기 위해 XRD, DTA/TG, VSM, $M\"{o}ssbauer$ spectrum으로 측정한 결과 다음과 같은 결론을 얻었다. $CaO-Bi_{2}O_{3}$ 계 amorphous ferrite는 10-50 mole% CaO, 10-50 mole% $Bi_{2}O_{3}$. 40-70 mole% $Fe_{2}O_{3}$의 조성 영역에서 제조가 가능하고 $BiFeO_{3}$와 $CaFe_{4}O_{7}$의 혼합 조성부근에서 강력한 자화를 나타낸다. 특히 ${(CaO)}_{20}-{(Bi_{2}O_{3})}_{15}{(Fe_{2}O_{3}}_{65}$의 조성에 있어서는 자화가 약 21.84 emu/g(10 kOe)이며 강 자성적인 거동을 나타낸다. 이 비정질 ferrite는 반강자성상($\alpha$-상)과 강자성상($\beta$-상)으로 되어 있다. 비정질 ferrite의 결정화는 $550^{\circ}C$와 $775^{\circ}C$에서 2단계로 일어나고, 그때 나타나는 결정상은 $BiFeO_{3}$의 perovskite 상과 ${\alpha}-Fe_{2}O_{3}$ 상이다.

• Restorative Dentistry and Endodontics
• /
• 제13권2호
• /
• pp.283-294
• /
• 1988

The purpose of this study was to investigate the characteristic features of the cells and tissues of the chronic periapical lesions using light microscope and electron microscope. Fifteen dental periapical lesions were obtained from the patients undergoing periapical surgery. Each specimen was divided into two parts along the tooth axis. One part was routinely processed for histopathologic examinations. 12 periapical lesions were diagnosed as granuloma and 3 periapical specimens as periapical cyst. The other part was fixed in 2.5% glutaraldehyde in 0.1M sodium cacodylate buffer at pH 7.4 and 1% osmic acid in same buffer. They were embedded in Epon 812. The semithin sections were used for the orientation of the lesions and the ultrathin sections were stained conventionally and examined with AEI Corynth 500 electron microscope. The results were as follows. 1. PMN and macrophages, which were dominant cell type, were scattered in small or large numbers throughout the central destructive area of granuloma. In the granulomatous area, plasma cells and lymphoytes were found in significant number and a lot of new capillary formation were revealed. Clefts caused by cholesterol were often seen in the connective tissue. Occasionally foam cells became collected in groups and epithelial proliferation were present. 2. In both granuloma and cyst, some plasma cells contained narrow cisternae of granular endoplasmic reticulum of which was tightly packed with electron dense materials, and other cells exhibited dilated profiles of granular endoplasmic reticulum. 3. In the area where plasma cells and lymphocytes were collected in groups, lymphocytes with well developed nucleolus and profuse cytoplasm were found and differentiating plasma cells were also present. 4. In the epithelial strands of the granulomatous area, epithelial cells contained enlarged endoplasmic reticulum, tonofilaments and ribosoms. Toward the intercellular space epithelial cells protruded a few microvilli. In the intercellular space, exudate-like electron dense materials, most of which was attached to the plasma membrane, appeared. 5. Some foam cells filled with numerous lipid droplets and others had lipid droplets and crystal-like structures. 6. Cyst epithelium consisted of bright cells and dark cells. The former had bright cytoplasm and small amounts of ribosoms, and the latter dark cytoplasm, many ribosoms, mitochondria and elongated microvilli. 7. Epithelial cells near the cyst lumen protruded a lot of long microvilli toward intercellular space and cyst lumen.

• 전기화학회지
• /
• 제1권1호
• /
• pp.45-51
• /
• 1998

Ni-MH 전지의 음극으로 쓰이는 수소저장합금(MH)의 한 종류인 $AB_2$계 합금은 수소저장량이 큰 장점이 있으나 초기활성화나 싸이클 수명 및 자기방전 특성이 나쁜 단점이 있다. 본 연구에서는 Zr-Ti-V-Mn-Ni계 합금에 비화학양론적으로 Cr을 소량 첨가했을 때와 La을 첨가하여 불화처리 했을 때의 초기활성화, 싸이클 수명 및 자기방전에 미치는 영향을 조사하였다 EPMA 및 SEM을 이용하여 합금의 표면을 분석하였으며 XRD 분석으로 결정구조를 관찰하였다. 또한 합금으로 전극을 제조하여 정전류 시험법, 임피던스법과 전위주사법 등에 의해 전극특성을 조사하였다. Cr이 첨가될수록 전극표면에 안정한 산화막이 형성되어 V등의 전해질로의 용해를 막아주어 충, 방전에 따른 수명특성 및 자기방전 특성을 향상시키지만 초기 전하이동 반응이 저해되어 초기활성화 특성이 악화되었다. La을 첨가 후 불화처리하면 표면에 반응성이 좋은 입자를 형성하여 전극의 초기 활성화가 크게 향상되었다.

• 한국자기학회지
• /
• 제14권6호
• /
• pp.219-223
• /
• 2004

L $i_{0.5}$F $e_{2.5-{\chi}}$Rhx $O_4$($\chi$= 0.25, 0.50, 0.75, 1.00)을 직접합성법으로 제조하고, 시료의 조성비에 따른 자기적 성질과 결정학적 구조를 연구하였다. x선 회절실험분석 결과 시료 모두 공간군 Fd3m에 해당하는 입방 스피넬구조를 가졌고, Rh을 치환함에 따라 Li이온이 팔면체 자리에서 사면체 자리로의 이동이 나타났다. 시료의 격자상수는 Rh을 치환함에 따라 8.3365 $\AA$에서 8.3932 $\AA$으로 증가하였다. Neel 온도 이하에서 외부자기장을 가하지 않은 상태에서의 뫼스바우어 스펙트림과 외부자기장 (6 T)을 인가한 뫼스바우머 스펙트럼을 여러 온도에 대하여 취하여 미시적 자성구조를 측정하였다. 외부자기장하의 뫼스바우어 스펙트럼 분석으로 각 시료의 정확한 면적비를 계산하여 수행한 Debye온도 분석결과 전체 시료에서 사면체와 팔면체 자리가 비슷한 정도의 결합 세기를 가졌음을 알았다. $\chi$=0.75의 경우는 외부자기장하에서 사면체와 팔면체 자리의 초미세 자기장의 부호가 바뀌는 것을 알았고, 이는 Li ion의 자리이동과 일치하는 결과를 보인다 4.2K에서 극저온 하에서 6 T를 인가한 외부자기장의 스펙트럼분석으로 전체 시료의 자기적 스핀구조가 collinear spin 모형을 따름을 알 수 있었다.

• 대한소아치과학회지
• /
• 제25권1호
• /
• pp.209-224
• /
• 1998

The purpose of this study was to compare the amount of calcium fluoride deposited on the enamel and dentin surface and to obtain information on the morphological change and crystallographic details of mineral deposition after 12,000ppm APF application in vitro. The bovine enamel and dentin blocks were randomly assigned to eight groups according to artificial caries lesion formation and difference of fluoride application time. The fluoride concentration and morphological characteristics on the treated enamel and dentin surface were investigated by using fluoride quantitative analysis and SEM. The powdered enamel and dentin of the intact bovine incisors were prepared for the X-ray diffraction analysis. The following results were obtained. 1. The amounts of KOH-soluble fluoride on the carious enamel and dentin surface after 24h APF application were higher than after only 5min APF application(p<0.05), but in the case of the sound enamel and dentin surface were similar after 5min and 24h application (P>0.05). The fluoride content was highly increased in the carious dentin as compared with sound dentin after APF application(P<0.05). 2. The carious enamel surface after APF application, the demineralized enamel surface were recovered a more dense enamel surface and precipitation of crystal was observed a distintive surface layer of spherical globules of about 1 m diameter. In the case of the fluorided carious dentin surface, precipitation of calcium fluoride-like material was deposited both inside the dentinal tubules as well as in the intertubular regions. 3. The crystallographic structure of powdered enamel and dentin after 24h APF application had large crystallities of apatite and CaF2 diffraction peaks in the enamel as compared with dentin. The diffraction data collected from the 27.50-29.50(2) angular range of the powdered enamel, the (105) apatite, (225) apatite and (111) CaF2 peaks of the enamel crystallities were detected after 24h APF application.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.31.1-31.1
• /
• 2009

Carbon nanotubes (CNTs) are attractive material because of their superior electrical, mechanical, and chemical properties. Furthermore, their geometric features such as a large aspect ratio and a small radius of curvature at tip make them ideal for low-voltage field emission devices including backlight units of liquid crystal display, lighting lamps, X-ray source, microwave amplifiers, electron microscopes, etc. In field emission devices for display applications, the phosphor anode is positioned against the CNT emitters. In most case, light generated from the phosphor by electron bombardment passes through the anode front plate to reach observers. However, light is produced in a narrow depth of the surface of the phosphor layer because phosphor particles are big as much as several micrometers, which means that it is necessary to transmit through the phosphor layer. Hence, a drop of light intensity is unavoidable during this process. In this study, we fabricated a transparent cathode back plate by depositing an ultra-thin film of single walled CNTs (SWCNTs) on an indium tin oxide (ITO)-coated glass substrate. Two types of phosphor anode plates were employed to our transparent cathode back plate: One is an ITO glass substrate with a phosphor layer and the other is a Cr-coated glass substrate with phosphor layer. For the former case, light was radiated from both the front and the back sides, where luminance on the back was ~30% higher than that on the front in our experiments. For the other case, however, light was emitted only from the cathode back side as the Cr layer on the anode glass rolled as a reflecting mirror, improving the light luminance as much as ~60% compared with that on the front of one. This study seems to be discussed about the morphologies and field emission characteristics of CNT emitters according to the experimental parameters in fabricating the lamps emitting light on the both sides or only on the cathode back side. The experimental procedures are as follows. First, a CNT aqueous solution was prepared by ultrasonically dispersing purified SWCNTs in deionized water with sodium dodecyl sulfate (SDS). A milliliter or even several tens of micro-liters of CNT solution was deposited onto a porous alumina membrane through vacuum filtration. Thereafter, the alumina membrane was solvated with the 3 M NaOH solution and the floating CNT film was easily transferred to an ITO glass substrate. It is required for CNT film to make standing CNTs up to serve as electron emitter through an adhesive roller activation.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.74-74
• /
• 2010

One-dimensional nanosturctures such as nanowires and nanotube have been mainly proposed as important components of nano-electronic devices and are expected to play an integral part in design and construction of these devices. Silicon carbide(SiC) is one of a promising wide bandgap semiconductor that exhibits extraordinary properties, such as higher thermal conductivity, mechanical and chemical stability than silicon. Therefore, the synthesis of SiC-based nanowires(NWs) open a possibility for developing a potential application in nano-electronic devices which have to work under harsh environment. In this study, one-dimensional nanowires(NWs) of cubic phase silicon carbide($\beta$-SiC) were efficiently produced by thermal chemical vapor deposition(T-CVD) synthesis of mixtures containing Si powders and hydrocarbon in a alumina boat about $T\;=\;1400^{\circ}C$ SEM images are shown that the temperature below $1300^{\circ}C$ is not enough to synthesis the SiC NWs due to insufficient thermal energy for melting of Si Powder and decomposition of methane gas. However, the SiC NWs are produced over $1300^{\circ}C$ and the most efficient temperature for growth of SiC NWs is about $1400^{\circ}C$ with an average diameter range between 50 ~ 150 nm. Raman spectra revealed the crystal form of the synthesized SiC NWs is a cubic phase. Two distinct peaks at 795 and $970\;cm^{-1}$ over $1400^{\circ}C$ represent the TO and LO mode of the bulk $\beta$-SiC, respectively. In XRD spectra, this result was also verified with the strongest (111) peaks at $2{\theta}=35.7^{\circ}$, which is very close to (111) plane peak position of 3C-SiC over $1400 ^{\circ}C$ TEM images are represented to two typical $\beta$-SiC NWs structures. One is shown the defect-free $\beta$-SiC nanowire with a (111) interplane distance with 0.25 nm, and the other is the stacking-faulted $\beta$-SiC nanowire. Two SiC nanowires are covered with $SiO_2$ layer with a thickness of less 2 nm. Moreover, by changing the flow rate of methane gas, the 300 sccm is the optimal condition for synthesis of a large amount of $\beta$-SiC NWs.

• 한국식품위생안전성학회지
• /
• 제17권3호
• /
• pp.137-145
• /
• 2002

국내 6개 주요도시에서 조사된 어패류 오염도 현황을 토대로 우리나라 사람들의 어패류 섭취를 통한 유기주석화합물 인체노출량을 예측하고, 이에 따른 위해도를 추계하였다. 본 연구결과를 살펴보면 갈치의 경우, 성인이 식품수급표에서 제시하는 일일섭취량 3.02g/day를 평생 섭취한다는 노출시나리오하에 평균일일노출량은 확률분포로 나타냈을 때 그 중간값이 6.48$\times$ $10^{-7}$ mg/kg/day, 상한치 95th percentile값이 8.78$\times$$10^{-7}$ mg/kg/day로 나타났음을 알 수 있다. 본 연구에서는 비발암독성영향을 평가하기 위하여 BMD$_{10}$ 을 활용한 참고치(Reference dose)를 예측하였다. 이 때 BMD$_{10}$은 10% 비교변화를 BMR으로 하였을때 해당하는 용량의 95% 하한치이다. 본 연구에서 활용한 BMD는 digestion에 의한 근육내의 IgE titer, T.spiraris larvae와 조직학에 의한 근육내 T.spiraris larvae에 근거하여 예측된 것으로 0.03 mg/kg/day이다. 참고치는 BMD$_{10}$ 0.03 mg/kg/day에 불확실성 계수 100을 고려한 값으로 0.003 mg/kg/day이며, 이 때 활용한 불확실성계수는 실험동물에서 인체로의 외삽과정에서 고려한 계수 10과 인구집단 내 민감그룹 고려를 위한 계수 10을 적용한 것이다. 각 어패류의 위험지수(50th percentile)를 살펴보면 고등어에서 2.04$\times$ $10^{-2}$으로 가장 높게 나타났으며, 소라에서 2.70$\times$ $10^{-5}$으로 가장 낮은 값을 나타냈다.