• Economic and Environmental Geology
• /
• v.19 no.spc
• /
• pp.113-119
• /
• 1986

A characteristic mineralogical zonal distribuion is observed in a large scale(whole ore- body) small scales(handy specimens). They show similar chemical variations: most of elements except CaO were supplied by hydrothermal fluids to form skarns. Garnets occuring in the pyroxene-garnet skarn have a wide range of chemical composition ranging from andradite to grossularite, while individual grains of the garnets also show a similar zonation of chemical composition varied between grossularite and andradite. Highly contained Mo-bearing scheelites are generally concentrated in the central part of the Sang- dong skarn orebody. Similarly, some large grains of scheelite show a nice zonation due to different contents of Mo, highly enriched in the core of the scheelite crystal. This geochemical similarity in the large scale and small scales suggests the Sangdong skarn formation was achieved under a certain chemical environment, and detailed studies on a small scale texture could be a clue to understand a whole ore deposit.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.17-20
• /
• 1998

Thermal behavior of Flow Pattern Defect (FPD) and Large Pit (LP) in Czochralski Silicon crystals was investigated by applying high temperature ($\geq$1100$^{\circ}C$) annealing and non-agitation Secco etching. For evaluation of the effect of LP upon device performance / yield, DRAM and ASIC devices were fabricated. The results indicate that high temperature annealing generates LPs whereas it decreases FPD density drastically, and LP does not have detrimental effects on the performance /

• Journal of the Optical Society of Korea
• /
• v.19 no.1
• /
• pp.63-68
• /
• 2015

A one-step fabrication of a photonic crystal (PC) with functional defects is demonstrated. Using multi-beam phase-controlled holographic lithography with a diffracting optical element, large area one dimensional (1D) and two dimensional (2D) PCs with periodic defects were fabricated. The uniform area is up to $2mm^2$, and tens of defect channels have been introduced in the 1D and 2D PC structure. This technique gives rise to substantial reduction in the fabrication complexity and significant improvement in the spatial accuracy of introducing functional defects in photonic crystals. This method can also be used to design and fabricate three dimensional (3D) PCs with periodic defects.

• Journal of Information Display
• /
• v.13 no.1
• /
• pp.17-20
• /
• 2012

The current panels for liquid crystal display (LCD) TV sets are all characterized by pins placed on two sides. To manufacture one type of panel, a dedicated mask is needed, and the production line should be started once. Moreover, the whole panel needs to be removed if a dead pixel is found. If the panel, however, will first be fabricated with pins placed on four sides and then divided by a cross-cut into four equal-sized panels with pins placed on two sides, one set of masks can be used to manufacture two types of LCD panels, which was referred to by the authors as dual mode. In this paper, the concept of the dual mode and its differences from the conventional way of producing panels are introduced. Its advantages in boosting production efficiency, improving the product's good rate, and lowering the production cost are also described based on case studies. Of particular importance is the fact that the dual mode is very suitable for the trial production of very-large-area LCD TV sets.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.8
• /
• pp.871-874
• /
• 2004

In recent, it is said that the trend of LCD is direction to pursue high qualities like as high transmittance, high contrast ratio, wide viewing angle, fast response time, and so on. Especially, it is known that these qualities are essential to large size LCD like as LCD TV and we can realize them through to uniform cell gap and deep black state. Until now, the ball spacer has been used to control of uniform cell gap. However, the existence of ball spacer inside the cell causes the deformation of the liquid crystal molecules and damage to alignment layer. Such a deformation of the liquid crystal causes light-leakage in the dark state, which lowers contrast ratio of the display. Nowadays, this problem has been solved by using Patterned Spacer on Color Filter. but Side Effect just as gravity mura has been induced. In this paper, we studied the mechanism on gravity mura in case of using patterned spacer on color filter.

• Journal of the Korean Chemical Society
• /
• v.39 no.1
• /
• pp.76-80
• /
• 1995

Polydimethylsiloxane(PDMS)-co-poly(2-hydroxyethyl methacrylate)(PHEMA) was prepared and the degree of swelling of solvents into the polymers was examined. It was confirmed that the solubility parameter of PHEMA homopolymer is 26 (J/cm3)1/2. Ethanol was significantly absorbed into copolymers containing large amount of PHEMA, while tetrahydrofuran was effectively absorbed into copolymers containing large amount of PDMS. Absorption of polar solvents into the copolymers were increased with the increase of PDMS content. The model drug, crystal violet (CV), was more absorbable into PDMS-HPEMA copolymers than PHEMA homopolymer. Absorption of CV was decreased with the increase of PDMS content of the copolymers.

• Journal of the Optical Society of Korea
• /
• v.7 no.2
• /
• pp.72-78
• /
• 2003

It is reported that the spectral loss of photonic crystal fiber (PCF) having a large hole-to-hole distance (~ 10 ${\mu}{\textrm}{m}$) is sensitive to micro- and macrobending when compared with the conventional single-mode fiber. In this paper, we will present the measurement result of the macro- and microbending characteristics of fabricated PCF with large hole-to-hole distance (> 10 ${\mu}{\textrm}{m}$) . For the macrobending experiment, the fiber was simply wound around a circular structure with variable diameter that could be reduced to a few centimeters. For the microbending case, regularly spaced silica rods were attached on a slide glass and pressed against the fiber by loading a stack of metal plates of known weight on the glass. The transmission loss spectrum shows a rather flat response to the to microbending, and this makes the PCF a good candidate for a wideband variable optical attenuator.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.4
• /
• pp.387-395
• /
• 1999

The strain, surface and interfacial energies of III-V ternary systems were calculated for three kinds of structure modes: the Frank-van der Merwe(FM) mode, the Stanski-Krastanov(SK) mode and the Volmer-Weber(VW) mode. The free energy for each mode was estimated as functions of thickness and composition or lattice misfit. Through comparison of the free energy of each mode, it was found that the thickness-composition phase diagrams of III-V ternary systems can be determined only by considering the balance of the free energy and three kinds of structure modes appear in the phase diagrams. The SK mode appears only when the lattice misfit is large and/or the lattice layer is thick. The most stable structure of the SK mode is a cluster with four lattice layers or minimum thickness on a wetting layer of increasing lattice layers. The VW mode appears when the lattice misfit is large and the lattice layer is thin and only in the INPSb/InP and GaPSb/GaP system which have the largest lattice misfit of III-V ternary systems. The stable region of the SK mode in the GaPSb/GaP and InPSb/InP phase diagrams is largest of all because the composition dependence of the strain energy of these systems is stronger than that of the other systems. The critical number of lattice layers below which two-dimensional(2D) layers precede the three-dimensional(3D) nucleation in the SK mode at x=1.0 depends on the lattice misfit.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.6
• /
• pp.289-294
• /
• 2017

Films fabricated using atomic layer 2-dimensional nanosheets exhibit various physical properties depending on the size of the nanosheet. This is because the physical properties of the film depend on the interfacial properties between the sheets. Therefore, the synthesis of large-sized nanosheets is very important because it can reduce the dependency of the film on the interfacial properties. In this study, we succeeded in fabricating $TiO_x$ nanosheets with atomic layer thickness over micrometer size by using single-crystallized starting material and its chemical exfoliation. In addition, it was revealed that the mechanical agitation speed (the stirring speed of a magnetic bar) during the exfoliation step using the organic material is closely related to the nanosheet size and the colloidal concentration of the nanosheets.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.6
• /
• pp.365-371
• /
• 2019

In this study, the flame temperature distribution of the diffusion flame burner for SiO₂ deposition was analyzed by the computational fluid analysis. This corresponds to the previous step for simulating the SiO₂ preform deposition process for manufacturing optical fibers using environmentally friendly raw materials. In order to model premixed combustion, heat flow, convection, and chemical reactions were considered, and Reynolds-averaged Navier-Stokes equations and k-ω models were used. As a result, the temperature distribution of the flame showed a tendency to increase the distance from the nozzle surface to the maximum temperature when the flow rate of the auxiliary oxygen increased. In addition, it was confirmed that the temperature distribution due to incomplete combustion was large in the combustion reaction with a large equivalence ratio of the mixed gas.