• Steel and Composite Structures
• /
• v.37 no.2
• /
• pp.117-136
• /
• 2020

Curved steel-concrete composite box girder has been widely adopted in urban overpasses and ramp bridges. In order to investigate its mechanical behavior under complicated and combined bending, shear and torsion load, two large-curvature composite box girders with interior angles of 25° and 45° were tested under static hogging moment. Based on the strain and deflection measurement on critical cross-sections during the static loading test, the failure mode, cracking behavior, load-displacement relationship, and strain distribution in the steel plate and rebar were investigated in detail. The test result showed the large-curvature composite box girders exhibited notable shear lag in the concrete slab and steel girder. Also, the constraint torsion and distortion effect caused the stress measured at the inner side of the composite beam to be notably higher than that of the outer side. The strain distribution in the steel web was approximately linear; therefore, the assumption that the plane section remains plane was approximately validated based on strain measurement at steel web. Furthermore, the full-process non-linear elaborate finite element (FE) models of the two specimens were developed based on commercial FE software MSC.MARC. The modeling scheme and constitutive model were illustrated in detail. Based on the comparison between the FE model and test results, the FE model effectively simulated the failure mode, the load-displacement curve, and the strain development of longitudinal rebar and steel girder with sufficient accuracy. The comparison between the FE model and the test result validated the accuracy of the developed FE model.

• Wind and Structures
• /
• v.20 no.6
• /
• pp.719-737
• /
• 2015

Full scale measurement on the structural dynamic characteristics and Vortex-induced Vibrations (VIV) of a long-span suspension bridge with a central span of 1650 m were conducted. Different Finite Element (FE) modeling principles for the separated twin-box girder were compared and evaluated with the field vibration test results, and the double-spine model was determined to be the best simulation model, but certain modification still needs to be made which will affect the basic modeling parameters and the dynamic response prediction values of corresponding wind tunnel tests. Based on the FE modal analysis results, small-scaled and large-scaled sectional model tests were both carried out to investigate the VIV responses, and probable Reynolds Number effects or scale effect on VIV responses were presented. Based on the observed VIV modes in the field measurement, the VIV results obtained from sectional model tests were converted into those of the three-dimensional (3D) full-scale bridge and subsequently compared with field measurement results. It is indicated that the large-scaled sectional model test can probably provide a reasonable and effective prediction on VIV response.

• Journal of Mechanical Science and Technology
• /
• v.19 no.3
• /
• pp.913-923
• /
• 2005

The dynamic mixed model (DMM) combined with a box filter of Zang et. al. (1993) has been generalized for passive scalar transport and applied to large eddy simulation of turbulent channel flows with Prandtl number up to 10. Results from a priori test showed that DMM is capable of predicting both subgrid-scale (SGS) scalar flux and dissipation rather accurately for the Prandtl numbers considered. This would suggest that the favorable feature of DMM, originally developed for the velocity field, works equally well for scalar transport problem. The validity of the DMM has also been tested a posteriori. The results of the large eddy simulation showed that DMM is superior to the dynamic Smagorinsky model in the prediction of scalar field and the model performance of DMM depends to a lesser degree on the ratio of test to grid filter widths, unlike in the a priori test.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.8
• /
• pp.5-12
• /
• 2011

This study was performed to analyze the degree of rainfalls, the duration time of rainfalls, the inclination of slopes and other damage causes depending on the ground condition, when the landslide occurs by the rainfall. Based on that, a big and a small model soil box were compared to examine the features of landslides, which is ultimately for forecasting landslides. An artificial rainfall device was installed in the model box, and the large model box has a real-size slope in it. Also, various measures were fulfilled such as collapse forms, a pore pressure, an earth pressure and moisture contents in order to analyze the effect of the model box size on the landslide mechanism and to test the usability of a small model box as a material for landslide experiments.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.2
• /
• pp.19-29
• /
• 2008

In case of unit testing, White-box test can be used to closely check source code and to analyze logic and statement errors. On the other hand, in case of function testing of system level, Black-box test can be mainly used to compare actual and expected results by inputting test data because the scale of function is large. This Black-Box test in system testing level has problem in tracing errors in source code when we find errors. Moreover applying White-box test is not easy for system testing level because the levels of test target are different. Therefore this paper suggests the vertical test method of a practical and integrated system level which can checks up to source code level using White-box test style although it aims to test the highly abstract level like a system function. In addition, the experiment explains how to apply the vertical test by displaying an example which traces from UML specification model to the source code and also shows efficiency of error trace.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05a
• /
• pp.479-482
• /
• 2005

The concrete box girder members are extensively used as a superstructure in bridge construction. The load carrying capacity of concrete box girders in lateral direction is generally influenced by the sizes of haunch and web. The internal upper decks are restrained by the webs and exhibit strength enhancement due to the development of aching action. The current codes do not have generally consider the arching action of deck slab in the design because of complexity of the behavior. However, there are significant benefits in utilizing the effects of arching action in the design of concrete members. The main objective of this paper is to propose a rational method to predict the ultimate load of deck slab by considering various haunch sizes and web restraint effect of concrete box girder bridges. To this end, a comprehensive experimental program has been set up and seven large-scale concrete box girders have been tested. A transverse analysis model of concrete box girders with haunches is proposed and compared with test data. The results of present study indicate that the ultimate strength is significantly affected by haunch dimension. The increase of strength due to concrete arcing action is reduced with an increase of prestressing steel ratio in laterally prestressed concrete box girders and increases with a larger haunch dimension. The proposed theory allows more realistic prediction of lateral ultimate strength for rational design of actual concrete box girder bridges.

• Journal of KIISE:Software and Applications
• /
• v.31 no.6
• /
• pp.741-749
• /
• 2004

Component users must customize components they obtain from providers, in order to fit them to their own purposes. Normally, a component consists of black-box parts and white-box parts. Component users customize a component by modifying white-box parts of a component, and the customization faults appear through the interaction between black-box parts and white-box parts. Customization testing could be an integration testing of these two parts of a component. Also, customization testing in CBSD should select effective test data to reduce the testing cost, since CBSD aims to reduce the development cost. Therefore, this paper proposes a customization testing technique based on COM architecture through analyzing many COM components, and the technique selects effective test data. This paper evaluates the effectiveness of the test data selected by the proposed technique through an empirical study. It applies the techlique to a large-scale component-based system, Chamois, and it shows that the technique enables us to test customized COM components that run in a real component-based system

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.4
• /
• pp.20-29
• /
• 2007

The engagement control software embedded in the weapon control computer of the fire control center for air defense missile system is large-scale real-time software. The use of typical software development methodologies is not appropriate to develop such large-scale embedded software in terms of reusability, reliability, and productivity for the reason that it is significantly complicated, and highly dependent on hardware platforms and developers. In this paper, a model-based software architecture using components based on UML 2.0 for the engagement control software is presented in order to solve these problems. This software architecture is verified using the black-box test, the scenario-based test, and the Ethernet packet monitoring test methods. The results demonstrate that the developed software architecture can be employed to enhance reusability, maintainability, and productivity of large-scale embedded software.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1992.10a
• /
• pp.140-154
• /
• 1992

The objective of the research stated here was aimed at providing the information needed to establish the Korean Seismic Design Code Recommendations and Guides for precast concrete (P.C) large panel apartment buildings. This was accomplished by investigation and analysis of the response of P.C large panel structures subjected to shaking table excitation simulating earthquake ground motion. one of the test specimens used was 1/3-scaled 3-story box P.C model provided by Sam-Hwan Camus Corporation. The 4m $\times$4m shaking table was used to simulate the earthquake ground motion. the employed input accelerogram was the one recorded as Taft N21E component and the peak ground acceleration(PGA) was scaled depending on the desired level of seismic severity and the time according to dynamic similitude rule. Based on results obtained from shaking table test of this P.C model, the following conclusions were drawn . (1) As far as test specimen is concerned, the seismic safety factors turns out to be 7~8. (2)P.C model has damping ratio of about8% which is twice larger than in-situ R.C. structure. And (3)this model has global displacement ductility ratio of 2~3 through the energy dissipation by opening and sliding of joints.

• Wind and Structures
• /
• v.7 no.1
• /
• pp.41-54
• /
• 2004

An analysis refinement of the Messina Strait suspension bridge project has been recently required, concerning mainly the yaw angle effects on the multi-box deck section aerodynamics and the vortex shedding at low reduced velocities $V^*$. In particular the possible interaction of the axial flow with the large cross beams has been investigated. An original test rig has been designed at this purpose allowing for both forced motion and free motion aero elastic tests, varying the average angle of attack ${\alpha}$ and the deck yaw angle ${\beta}$. The hydraulic driven test rig allowed for both dynamic and stationary tests so that both the stationary coefficients and the flutter derivatives have been evaluated for each yaw angle. Specific free motion tests, taking advantage from the aeroelastic features of the section model, allowed also the study of the vortex shedding induced phenomena.