• Fisheries and Aquatic Sciences
• /
• v.21 no.10
• /
• pp.30.1-30.6
• /
• 2018

A study of three feeding trials was conducted to investigate the dietary protein requirements of Pacific white shrimp (Litopenaeus vannamei) at three different growth stages. Six experimental diets were formulated to include increasing protein levels of 25, 30, 35, 40, 45, and 50% (designated as P25, P30, P35, P40, P45, and P50, respectively) for three feeding trials. The three feeding trials were conducted in different-sized shrimp at 0.65 g (trial 1), 4.80 g (trial 2), and 10.5 g (trial 3). Triplicate groups of shrimp were fed one of the experimental diets for 36, 42, and 48 days in trials 1, 2, and 3, respectively. In trial 1, the growth performance was not affected by the dietary protein levels. However, protein efficiency ratio was significantly higher in P30 diet compared to P40, P45, and P50 diets. In trial 2, growth rate was significantly higher in P35 diet than in P25 diet. In trial 3, the lowest growth performance was obtained in P25 diet which significantly differed from that of other experimental diets. Broken line analysis of growth data indicates that the optimal dietary level of crude protein is 34.5, 35.6, and 32.2% for small-, medium-, and large-sized (juvenile, sub-adult, and adult stages) Pacific white shrimp, respectively.

• Mycobiology
• /
• v.30 no.2
• /
• pp.65-69
• /
• 2002

Sclerotial development of Grifola umbellata(Pers. : Fr.) Donk was investigated through microscopic examinations. The sclerotium of G. umbellata was bumpy and rugged, multi-branched, and dark-brown to black in color. The sclerotial development of G. umbellata was categorized into three stages such as sclerotial initial, development and maturation. Sclerotium development was initiated as the white fungal mass. The superficial part of white sclerotium changed into gray, light brown and then black as its development proceeded further. As a distinctive characteristic of this fungus, a large number of crystals were observed in the medulla layer of sclerotium during its maturation. For development of new sclerotium, G. umbellata formed a white sclerotial primordium on the matured sclerotium. Development of sclerotium in G. umbellata was intimately associated with rhizomorphs of Armillariella mellea and the developing sclerotia were often penetrated by rhizomorphs of A. mellea into medulla layer.

• Wind and Structures
• /
• v.16 no.2
• /
• pp.157-178
• /
• 2013

Output-only modal parameter identification is based on the assumption that external forces on a linear structure are white noise. However, harmonic excitations are also often present in real structural vibrations. In particular, it has been realized that the use of forced acceleration responses without knowledge of external forces can pose a problem in the modal parameter identification, because an external force is imparted to its impulse acceleration response function. This paper provides a three-stage identification procedure as a solution to the problem of harmonic and white noise excitations in the acceleration responses of a linear dynamic system. This procedure combines the uses of the mode indicator function, the complex mode indication function, the enhanced frequency response function, an iterative rational fraction polynomial method and mode shape inspection for the correlation-related functions of the force-embedded acceleration responses. The procedure is verified via numerical simulation of a five-floor shear building and a two-dimensional frame and also applied to ambient vibration data of a large-span roof structure. Results show that the modal parameters of these dynamic systems can be satisfactorily identified under the requirement of wide separation between vibration modes and harmonic excitations.

• Korean Journal of Poultry Science
• /
• v.50 no.3
• /
• pp.187-191
• /
• 2023

Korean native ducks (KNDs) continue to have a high preference from consumers due to their excellent meat quality and taste characteristics. However, due to low productivity and fixed plumage color phenotype, it could not secure a large share in the domestic market compared to imported species. In order to improve the market share of KNDs, the genetic characteristics of the breed should be identified and used for improvement and selection. Therefore, this study was conducted to identify the genetic information of colored and white KNDs using next-generation resequencing data and screening for differences between the two groups. As a result of the analysis, the genetic variants that showed significant differences between the colored and white KND groups were mainly identified as mutations related to tyrosine activity. The variants were located in the genes that affect melanin synthesis and regulation, such as EGFR, PDGFRA, and DDR2, and these were reported as the candidate genes related to plumage pigmentation in poultry. Therefore, the results of this study are expected to be useful as a basis for understanding and utilizing the genetic characteristics of KNDs for genetic improvement and selection of white broiler KNDs.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.3
• /
• pp.245-255
• /
• 1994

Weak persistence of white clover (Trifolium repens L.) under continuous grazing management has been limited its availability in the mixture with grasses. The experiment was carried out to determine the effect of defoliation interval on the regrowth and morphological characters of the clover cultivars. Individual plants of Regal (large leaf), Grasslands Huia (medium-small leaf) and Aberystwyth S184 (small leaf) were grown in 15cm plastic pot containing a 1: 2: 1 soil:sand:Promix mixture for 55 days, and then clipped to remove all fully expanded leaves every 7, 14 or 28 days. For the analysis of the cultivar response, plants were sampled on the final harvest date(0), and 1, 3, 7, 14 and 28 days after the final harvest date. Harvested dry weight of all cultivars declined as defoliation interval was increased, and that of Regal was the highest compared to the other cultivars. During the regrowing period, increase of total plant dry weight was due to that of leaf and petiole dry weight, and that of Osceola was greater than the others. Although total leaf area and mean single leaf area were increased during the regrowing period, they were reduced with increased defoliation interval and those of Osceola were the greatest until 14-days regrowth. S184 possessed the most number of leaves and Osceola did the longest petiole since 14-days regrowth although the more defoliation, the less nunber of leaves per plant and the shorter petiole. Stolon length and growing tips of all cultivars increased steeply during regrowth, while they were decreased with increased defoliation interval and those of S184 were the highest. More frequent defoliation had detrimental effects on regrowth of white clover, although larger leaf type was productive but less persistent in a mixture with grasses than smaller leaf type.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.10B
• /
• pp.1714-1721
• /
• 2000

In the mobile communication using DS-CDMA systems the problem of multiple user interference which reduce the performance is generated by multiple user access. In this paper to solve this problem we proposed the direct decision blind adaptive receiver with knowledge of only the desired user's spreading sequence. Simulation result present that the total user's power has equal gain The gain of signal to interference ratio for the proposed blind DD-LMS receiver has about 6[dB] than conventional receiver at additive white Gaussian noise and large gain at multipath channels. And when interference user's power has more large gain than desired user's power the gain of SIR for the proposed receiver has large value. And simulation result of bit error rate present that DD-LMS receiver has higher performance than LCCMA receiver. Thus the proposed blind DD-LMS receiver has robustness against interference of high power user and multipath channels.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.199-200
• /
• 2002

Three-body abrasive wear resistance of mild steel, low alloy steel (Bisalloy) and 27%Cr white cast iron was investigated using a ball-cratering test. Glass beads, silica sand, quartz and alumina abrasive particles with sizes larger than $100{\mu}m$ were used to make slurries. It was found that the wear rates of all three materials tested increased with time when angular abrasive particles were used and were rather constant when round particles were used. This increase in wear rates was mainly due to the gradual increase in ball surface roughness with testing time. Abrasive particles with higher angularity caused higher ball surface roughness. Mild steel and Bisalloy were more affected by this ball surface roughness changes than the hard white cast iron. Generally, three-body rolling wear dominated. The contribution of two-body grooving wear increased when the ball roughness was significant. More grooves were found when round particles were used or the size of the particles was decreased.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.195-198
• /
• 2002

Demand for high precision measurement of large area is increasing in many industrial fields. White-light Scanning Interferometer(WSI) is a well-known method for 3D profile measurement. However WSI has some limitations in a measurement range because of the sensing mechanism. Therefore, in this paper we use a heterodyne laser interferometer to get over the limitations of a short measurement range in WSI, We suggest a new WSI system combined with heterodyne laser interferometer. This system is aimed at eliminating Abbe error with measuring the focus point directly. With the use of triggering functionality of WSI, we can use this system as a probe of a precision stage such as a probe of CMM. The suggested system gives a repeatability of 87 nm in the absolute distance measurement test under the laboratory environment.

• Journal of the Korean Society of Costume
• /
• v.18
• /
• pp.283-289
• /
• 1992

In this paper, dyeing properties and colorfastness of ramie, flax, and cotton fabrics for direct dyes were compared. When dyed in a same liquor-goods ratio, in case of green dyes, colorfastness to light was similar for three fibers but in case of red dyes, cotton had a lower level. For colorfastness to laundering, there fibers were similar and three were no consistent differences. The degree of stain about white cotton fabric was higher in case of red dyes and it showed the difference of dye's properties. The degree of stain about white wool fabric showed the highs resistance or stain and little stain was seen. This result represented that the dyes. used were proper direct dyes for cellulosic fibers. For the difference of shade, the cotton was consistently brighter and the shade of ramie was darker than that of cotton and flax. This might mean that optical effects arose from the comparatively large cross-sectional size of the ramie fiber and its highly oriented structure.

• Korean Journal of Human Ecology
• /
• v.7 no.2
• /
• pp.75-80
• /
• 1998

In this paper, deying properties and colorfastness of ramie, flax, and cotton fabrics for direct dyes were compared. When dyed in a same dyeing bath ratio, in case of green dyes, colorfastness to light was similar for three fabrics but in case of red dyes, cotton had a lower level. For colorfastness to laundering, three fabrics were similar and there were no consistent differences. The degree of stain about white fabric cotton was highest in case of red dyes. The degree of stain about white fabric wool showed the high resistance of stain and little stain was seen. This result represented that the used dyes were proper direct dyes for cellulosic fibers. For the difference of shade, the cotton was cosistently brighter and the shade of ramie was darker than of cotton and flax. This might mean that optical effects arouse from the comparatively large cross-sectional size of the ramie fiber and its highly ordered structure.