• Journal of Advanced Marine Engineering and Technology
• /
• 제35권6호
• /
• pp.829-834
• /
• 2011

본 논문에서는 대형 선박용 디젤 엔진의 실린더 라이너의 마모량을 측정하는 새로운 시스템의 개발에 관하여 소개한다. 제안된 시스템은 LVDT, 온도센서, 실린더 내부의 밝기조절용 LED 및 카메라가 각각 1개씩 부착된 측정부, 계측명령전달 및 측정데이터 모니터링을 담당하는 컴퓨터기반 모니터링부, 측정부의 제어 및 측정데이터의 모니터링부로의 전송을 담당하는 주 제어부로 구성된다. 개발된 시스템의 정도는 1/100 mm 의 측정정도를 갖는 내경게이지의 것과 비교되어진다.

• 복식
• /
• 제1권
• /
• pp.119-129
• /
• 1977

It is significant for developing the future for us to know our present age. In order to preserve our Korean costume as a fola clothes retaining our distinguished independent characterisitics and to help design the tomorrow of our Korean costume playing a role as a racial to develop the world clothing culture, a survey was conducted to investigate modern people's conscious-ness and wearing practumes of Korean costume by questionaire and interviewing methods. The results of the survey were analyzed as follows: (1) At present, Korean costumes were purchased as customtailored(64.0%) and as ready-made(17.8%) and most of them were not made at individual homes. The laundry and ironing of them were carried out at laundry shops(68.8%). Considering our present economic, social and cultural aspects, sowing, laundryand ironing will not be carried out at homes again in the future and ready made costumes seen to be produced in a large scale in the future. Garment makers and laundry shop operators should be trained how to make our Korean costumes retain our traditional beauty in the course of their production and laundry and the makers of ready-made costumes must make research how to efficiently produce ideal ready-made costumes by adopting the synchro system in their wrk odisivion. (2) The age group wearing Korean costumes most frequently was the aged people over 60 (their wearing rate; 45%-50%) and the group wearing them most frequently next io the aged people over 60, was housewives(their wearing rate; 15%-20%). Excludign aged people and housewives, other respondentsdid not wear Korean costumes very frequently. Men's wearing rate was lower their wearing rate was the younger their ages were and the less their monthly incomes were. Korean costumes were used for holiday and festival(60%), wedding and funeral ceremonies (52%), visiting and working(22%), casual wear(12.8%) and home wear(9.2%). The use of Korean costumes as casual and home wears, was lower than the use for holday, festival, visiting and working, Under our present circumstances in which our Korean people use both Western style clothes and Korean costumer, our Korean costume has lostits position as a basic and necessary requiement in Korean people's daily life and become a ceremonical and fancy costume. It is natural that the times and life change everything in our daily life. Our costume has to be made as good ceremonial and fancy clothes satisfying modern sensibility according to its new role. In order for us to get close with our clothes, a keen study must be carried out to cleat the color, material, style, function and harmony of the Korean costume matching the of the times. (3) The 47.8% of the respondents answered that they were proud of our Korean costume as our folk clothes, 47.6% replied that thought them just common and 1.1% responded that they were ashamed of it. Most of them were affirmative in feeling pride with our Korean costume. (4) Considering the functional aspect of Korean costumes, their strong points were symetric beauty, rhythmical beauty, unity feeling, harmonical beauty and detailed decorations. Their common shortcomings were lack of individuality and inadequateness for active life. The shortcomings of woman costumes were suppressing breast, making resperation difficult and in adequnteness in summer time. The main reason not to wear our Korean costumes, was due to the fact that they are incomvenient for active life. As a measure to eliminate such shortcomings, 1) the suspension system of skirt to remove the suppression of breast should be generally adopted. 2) they should be simplified in their structure to make them convenient for active life and adepuate in wearing them in hot weather in an extent to which the traditional beauty of the costume may not be lostand 3) a new technique must be explored for showing individuality by wearing method and new arrangment of colors and decorations. (5) The reasons desiring to wear Korean costumes were classifide as follows: A. Korean costumes are our traditional clothes(43.4%). B. Korean costumes are noble and beautiful(26.8%). C. They are accustomed to wear Korean costumes by habit(19.5%). D. Korean costumes are necessary for attending ceremoneis(9.5%). E. Miscellaneous reasons(0.8%). Classifying these reasons into age groups, the high age group over 40 wore them because they were easy to wear by habit and the low age group of 10-30 never thought that they were east to wear by habit. Considering that even those who were accustomed to wear Korean costumes showed a low wearing rate and that the young generation were accustomed to wear Western style clothes rather than Korean costumes, the wearing rate of Korean costumes will be reduced in the future if such trend continues. It is urgent for us to make our best efforts in order to enhance the interest of young generation in Korean costumes and not to make them lose the strong points of Korean costume in the future. (6) Conicering the plan of the respondents on what kind of clothes they were going to wear in the future, among the age group over 50, those who wanted to wear only Korean costumes were 24.8%(men) and 35.1%(women), those who wanted to wear 49.7%(men) and 47.4(women), those who wanted to wear chiefly Western style clothes were 20.7% (men) and 14.4%(women) and those who wanted to wear only Western style clothes, were 2.4% (men) and 2.1%(women). This shows that the general tendency to wear only or chiefly Korean costumes is more prevalent than that to wear only Western style. Among the age group under 50, the tendency to wear Western style clothes was conspicuous and most of the respondent answered that they would wear chiefly Western style clothes and Korean costumes occasionally. Only 5.4% of the respondent answered that they would wear only Western style clothes and this shows that meny respondents still wonted to wear Korean costumes. Those who wanted their descendants to wear what they desire, were 50.1%(men) and 68.8% (women) and those who wanted their descendants to wear Koran costumes occasionally, were 85.8%(men) and 86.3%(women). This shows that most of respondents wanted their descendants to wear Korean costumes. In order to realize, it is necessory for us to make ourdescendants recognize the preciousness of our traditional culture and modify our Korean costumes according to their taste so that they may like wearing them.

• 해양환경안전학회지
• /
• 제2권1호
• /
• pp.57-65
• /
• 1996

The latest date, No. 1 YouII was grounded and sunk into the sea at MAMHYUNGJEDO ( South brother Island) in Sep. 21. 1995, and M.V. Sea Prince of V.L.C.C also made a big oil poullution accident owing to Typhoon "Paei" at front sea of Yeu Choun on Jul. 25. 1995. The large or small scall scale of oil poullution accident frequently was occurred about 300-350 cases per ine(1) year. The countries advanced in marine relations like as, nited Kingdom and Japan, have perfect system The country of expert education, training and oil recovery equipments in oil poullution accidents. The large quantity oil skimming ship's basic condition need general skimming ship which was high speed and large quantity skimming ability , and hve to store the recovered oil into tanks This oil skimming shop are composit the skimmer whuch move up and down according to the wace movements, storage tank which storage the recovered oil in after side, transfer pump which transformed from flooding tank to separating tank and separating tank which separated the oil mixtures, Also there are cylindrical floated which keep the auto positing, gate which keep the auto positing, gate which protect and guide the recovering oil from sea and balance weight for skimmer balance. Also there are cylindrical floated which keep the auto positing, gate which protect and guide the recovering oil from sea and balance weight for skimmer balance. The important arrangement is twin arm which moved by two hinge and move te skimming unit by wave movement. In gate of inside, made long wear in the gate bellow position, there are also connected the flexible hose for oil mixtures drop. The separating tank composited with multi-divided bulkhead for ffective oil and sea water separating by settling and flotation principle. As use the above natural princile and equipment, we can remove the large quantity oil by developed oil skimming ship.ming ship.

• 한국전산유체공학회지
• /
• 제9권2호
• /
• pp.11-17
• /
• 2004

CFD analysis was performed to figure out flow behavior in the inlet plenum of new research reactor where coolant is injected to the flow tubes with the fuel assembly. The computation results showed that large-scale vortices are generated in the inlet plenum by flow stream injected from inlet pipe. These vortices are divided into small vortices and reversed their revolution. They may lead to flow-induced vibration of fuel assembly, moreover, which has been regarded as a cause of fretting wear of fuel assembly. Also there is an another important thing that average velocity of each flow-tube is uneven showing difference in maximum 18%. So it has been suggested that perforated baffle will be installed to prevent the formation of vortex in the inlet plenum. Two perforated baffles, one is flow skirt and the other is muffler type flow straightener, were proposed and their effect was evaluated using commercial CFD code, Fluent. According to CFD analysis for two perforated baffles, it was confirmed that both of them can prevent or reduce vortex formation in the inlet plenum and make average velocity of each flow tube more even.

• Corrosion Science and Technology
• /
• 제17권3호
• /
• pp.123-128
• /
• 2018

The fabrication of a controlled surface is of great interest because it can be applied to various engineering facilities due to the various properties of the surface, such as self-cleaning, anti-bio-fouling, anti-icing, anti-corrosion, and anti-sticking. Controlled surfaces with micro/nano structures were fabricated using an ion beam focused onto a polypropylene (PP) surface with a fluoridation process. We developed a facile method of fabricating hydrophobic surfaces through ion beam treatment with argon and oxygen ions. The fabrication of low surface energy materials can replace the current expensive and complex manufacturing process. The contact angles (CAs) of the sample surface were $106^{\circ}$ and $108^{\circ}$ degrees using argon and oxygen ions, respectively. X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FT-IR) spectroscopy were used to determine the chemical composition of the surface. The morphology change of the surfaces was observed by scanning electron microscopy (SEM). The change of the surface morphology using the ion beam was shown to be very effective and provide enhanced optical properties. It is therefore expected that the prepared surface with wear and corrosion resistance might have a considerable potential in large scale industrial applications.

• 한국정밀공학회지
• /
• 제15권10호
• /
• pp.65-72
• /
• 1998

The BTA drilling chip is better for deep hole drilling than other self-piloting with pad drilling chips because the large length to diameter ratio allows a unique cutting force dispersion and better supplies the high pressure fluid. Therefore the BTA is useful for many tasks, such as coolant hole drilling of large scale dies, as well as tube seat drilling, which is essential for the heat exchanger, and variable component drilling for automobiles. Deep hole drilling has several significant problems, such as hole deviation, hole over-size, circularity, straightness, and surface roughness. The reasons for these problems, which often result in quality short comings, are an alignment of the BTA drilling system and the unbalance of cutting force by work piece and tool shape. This paper analyzes the properties through an experiment which com¬pared single-edge BTA drills with multiple-edge BTA drills, as well as the shapes of the tools to cause an unbalance of cutting force, and its effect on the precision of the worked hole. Conclusions are as follows. 1) In SMSSC drilling, 60m/min of BTA with single and multi-edged tools proved the best cutting condition and the lowest wear character. 2) The roundness got a little worse as cutting speed was increased, but surface roughness was hot affected. 3) It was proved that the burnishing torque of both drills approached 26%. which is almost the same as the 24% insisted on by Griffiths, and the dispersion characteristic of the multi-edged BTA drill proved better than the single-edge BTA drill.

• 한국안광학회지
• /
• 제11권1호
• /
• pp.71-75
• /
• 2006

본 연구의 목적은 사용한 RGP 콘택트렌즈의 표면 미세구조의 분석을 한 것이다. 조사를 위해 RGP콘택트렌즈는 피검자에 의해 1개월, 6개월 그리고 1년 사용한 것을 선택하였다. 이러한 RGP 콘택트렌즈의 전후 표면은 주사전자현미경으로 조사를 하였다. 그 결과는 다음과 같다. 1. RGP 콘택트렌즈 사용 1개월 후 전면과 후면의 표면은 선명하고 깨끗하였다. 2. 6개월 사용 렌즈의 전방 표면은 심한 반흔, 상처 자국, 파손 그리고 긁힘을 가지고 있었다. 그러나 후방 표면은 심한 이물질과 미생물 등이 나타났다. 3. 1년 사용렌즈는 좀더 심한 큰 반흔 손상과 많은 이물질들이 관찰되었다. 따라서 RGP 콘택트렌즈의 연장착용은 렌즈표면의 미세구조의 증가된 물리적인 손상과 심한 이물질의 누적을 나타내었다.

• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2003년도 Challenges and Achievements in Environmental Health
• /
• pp.24-25
• /
• 2003

Lead is ubiquitous in the human environment as a result of industrialization. China's rapid industrialization and traffic growth have increased the potential for lead emissions. Lead poisoning in children is one of the most common public health problems today, and it is entirely preventable. Children are more vulnerable to lead pollution and lead in their bodies can affect their nervous, circulatory, and digestive systems. Children are exposed to lead from different sources (such as paint, gasoline, and solder) and through different pathways (such as air, food, water, dust, and soil). Although all children are exposed to some lead from food, air, dust, and soil, some children are exposed to high dose sources of lead. Significant sources of lead for China's children include industrial emissions (often close to housing and schools), leaded gasoline, and occupational exposure that occurs when parents wear lead-contaminated clothing home from work, burning of coal for home heat and cooking, contaminated food, and some traditional medicines. To assess the blood lead level in children in China, a large-scale study was conducted in 19 cities among 9 provinces during 1997 to 2000. There were 6502 children, aged 3-5 years, were recruited in the study The result indicates that the mean blood lead level was 8.83ug/dl 3-5 year old living in city area. The mean blood lead level of boys was higher than that of girls (9.1l ug/dl vs 8.73ug/dl). Almost 30 percent childrens blood lead level exceeded 10ug/dl. The average blood lead level was higher than that of in 1985 (8.83ug/dl vs 8.lug/dl). An epidemiological study was carried on the children living around the cottage industries recycling the lead from battery. Nine hundreds fifty nine children, aged 5-12 years, living in lead polluted villages where the lead smelters located near the residential area and 207 control children live in unpolluted area were recruited in the study. The lead levels in air, soil, drinking water and crops were measured. The blood lead and ZnPP level were tested for all subjects. The results show that the local environment was polluted. The lead levels both in the air and crops were much higher than that of in control area. In the polluted area, the average blood level was 49.6ug/dl (rang 19.5-89.3ug/dl). Whereas, in the unpolluted area, the average blood level was 12.4ug/dl (rang 4.6-24.8ug/dl). This study indicates that in some countryside area, some cottage industries induce seriously lead pollution and cause children health problem. For the introducing of unleaded gasoline in some large cities, such as Beijing and Shanghai, the blood lead level showed a declined trend since 1997. By 2000, the use of leaded gasoline in motor vehicles has been prohibited in China. The most recent data available show that levels of lead in blood among children in Shanghai decreased from 8.3ug/dl in 1997 to 7.6ug/dl in 1999. The prevalence rate of children lead poisoning (blood lead >10ug/dl) was also decreased from 37.8% to 24.8%. In children living in downtown area, the blood lead level reduced dramatically. To explore the relationship between gene polymorphisms and individual susceptibility of lead poisoning, a molecular epidemiological study was conducted among children living in lead polluted environment. The result showed that the subjects with ALAD2 allele has higher ZPP level, and the subjects with VDR B allele has larger head circumference than only with b allele. In the present study, we demonstrated that ALAD genotypes modify lead effects on heme metabolism and VDR gene variants influence the skull development in highly exposed children. The polymorphism of ALAD and VDR genes might be the molecular inherited factor modifying the susceptibility of lead poisoning. Recently, Chinese government pays more attention to lead pollution and lead poisoning in children problem. The leaded gasoline was prohibited used in motor vehicles since 2000. The government has decided to have a clampdown on the high-polluted lead smelters for recycling the lead from battery in countryside. It is hopeful that the risk of lead poisoning in children will be decreased in the further