• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.4 s.142
• /
• pp.421-426
• /
• 2005

Scattering center extraction schemes for radar cross section reduction of large complex targets, like warships, was developed, which are an 1-D radar image method(range profile), and a direct analysis based on an object precision method. The analysis result of partial dihedral model shows that the presented direct analysis method is more efficient than the 1-D radar image method for scattering center extraction of interested targets, in terms of radar cross section reduction design, not signal processing. In order to verify the accuracy of the direct analysis method, a scattering center analysis of an naval weapon system was carried out, and the result was coincident with that of another well-known RCS analysis program. Finally, an analysis result of RCS and its scattering center of an 120m class warship-like model presented that the direct analysis method can be an efficient and powerful tools for radar cross section reduction of large complex targets.

• New & Renewable Energy
• /
• v.3 no.1 s.9
• /
• pp.27-37
• /
• 2007

This study is to analyse the feasibility for providing Co-generation plant in Apartment Complex for 4 typical Apartment Complexes located Seoul metropolitan area, The selected complexes are three midium-large size Apartment[nearby 35pyoug of floor area] and one complex of small size Apartment[below 25 pyoung of floor area] for comparison. The necessary data for the study were collected with visitation of each site. The study showed very positive result for the three medium-large size Apartment Complexes of which the average floor area is more than 25 pyoungs, while negative result for the Complex of which average floor area is less than 25 pyoungs. Other than floor size it was found that the electric consumption density also influence the economic feasibility. In study the unit fixed cost of the energy produced from Co-generation plant is one third of the unit variable cost[fuel cost] and it seems better to select high thermal efficiency machine for Co-generation plant even with some higher cost of the plant.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.495-499
• /
• 2006

While the use of large scale underground complex space is increasing currently, this research suggests the methodology of servicing advanced service for civilian and constructing active disaster protection system in order to be free from danger problem of underground complex space by applying new ubiquitous technology. Synchronization between virtual space and real space and construction of ubiquitous disaster protection system arc the core technology. Based on RFID, USN technology, usually, user centered spatial information services are presented. it can be convert to disaster protection system on emergency situation without delay. Through these technology. we can ensure the safety of underground space where the floating population is concentrated in, moreover, utilize for infrastructure that presents various civilian services. Then we can satisfy the increasing civilians desire for safety and welfare and finally, it will contribute to construction of productive city and creation of new conceptual market.

• Journal of Korean Society for Atmospheric Environment
• /
• v.14 no.5
• /
• pp.411-420
• /
• 1998

To estimate the dispersion coefficients in a coastal area with complex topography, several schemes using empirical equations expressed with and in lateral and vertical directions, respectively have been examined. Estimation results using these equations and meteorological data obtained from SODAR system were compared' with previously measured dispersion coefficients in other coastal areas. Validations of estimation results have been performed by comparing the measured concentrations with predicted ones empolying in Boryung coastal area. Important conclusions were drawn as follows; (1) Variations of lateral and vertical wind direction revealed different height dependency in upper and lower mixed boundary layer. (2) Because of turbulent constraint effect by large water body in a coastal region, the lateral and the vertical dispersion coefficients were smaller than those of P-G system. (3) As a result of examining the performance measure of these schemes through checking of coincidence between measured and predicted concentrations, vertical dispersion coefficients were smaller than those of P-G system, and the Cramer scheme was found to be more appropriate rather than others in the coastal area surrounding Boryung power plant.

• Proceedings of the KIEE Conference
• /
• 1998.07c
• /
• pp.1050-1052
• /
• 1998

As the power systems evolve, they are incorporating increasingly complex control and protection functions. Due to this, utilities are relying more and more on real-time simulators to study complex system interaction problems. This paper addresses some key questions regarding the needs of such simulators and their characteristic features/requirements. In countries like France and Canada, large scale simulators are developed and placed in practical use, and in others are now under development. Following this background, three typical simulators(ARENE, RTDS/HYPERSIM) will be examined focusing on the purpose, technology and experiences in a real-time simulator. Discussion will be extended to the future issues and potentials of the power system simulation.

• Journal of the Korean Chemical Society
• /
• v.7 no.1
• /
• pp.65-68
• /
• 1963

The solubility of ethyl bromide in nitrobenzene and in 1,2,4-trichlorobenzene has been measured at $19^{\circ}$ in the presence and absence of gallium bromide. When gallium bromide does not exist in the system, the solubility of ethyl bromide in nitrobenzene is greater than in 1,2,4-trichlorobenzene, indicating the stronger interaction of ethyl bromide with nitrobenzene than with 1,2,4-trichlorobenzene. When there exists gallium bromide in the system, an unstable 1: 1 complex, C2H5Br·GaBr3, of gallium bromide with ethyl bromide is formed in the solution. The 1: 1 complex in solution dissociates into the components to a large extent according to one of the following equilibria or both: $C_2H_5Br{\cdot}GaBr_3{\rightleftarrows}C_2H_5Br+GaBr_3$C_2H_5Br{\cdot}GaBr_3{\rightleftarrows}C_2H_5Br+1}2GaBr_3$$ The stability of the 1: 1 complex of ethyl bromide with gallium bromide is compared with that of the corresponding complex of methyl bromide.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.170-175
• /
• 2001

The design cycle associated with large engineering systems requires an initial decomposition of the complex system into design processes which are coupled through the transference of output data. Some of these design processes may be grouped into iterative subcycles. In analyzing or optimizing such a coupled system, it is essential to determine the best order of the processes within these subcycles to reduce design cycle time and cost. This is accomplished by decomposing large multidisciplinary problems into several multidisciplinary analysis subsystems (MDASS) and processing it in parallel. This paper proposes new strategy for parallel decomposition of multidisciplinary problems to improve design efficiency by using the multiple objective genetic algorithm (MOGA), and a sample test case is presented to show the effects of optimizing the sequence with MOGA.

• Proceedings of the KIEE Conference
• /
• 1999.07c
• /
• pp.1054-1056
• /
• 1999

It is the most important in small signal stability analysis of large scale Power systems to compute only the dominant eigenvalues selectively with numerical stability and efficiency. In this Paper evoluted linear analysis program, transformed state matrix using Inverse transformation with complex shift and then Hessenberg process and iterative scheme are used to accelerate Hessenberg process, can calculate dominant eigenvalues. In this Paper, The accuracy of this Program has been validated against 4-machines 11-bus system and New England 10-machines 39-bus system. Also applied to KEPCO system - about 791-bus 250-machines 2500-branches, got 2568 order state matrix, and calculated two dominant modes. This analysis result equaled to result of EPRI's SSSP program to use commonly, and calculating time is faster.

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.556-560
• /
• 2011

Players of construction projects proceed with each work process by information gathering, modification and communication. Due to the complex and long-span lifecycle projects increased, it became more important to grasp this mechanism for the successful project performance in construction project. Hence, most project information management systems or knowledge management systems equip information retrieval system. There are two logic to infer the meaning of retrieval target; inductive reasoning and deductive reasoning. The former is based on metadata explaining the target and the later is based on relation between data. To infer the information flow, it is necessary to define the correlation between players and work processes. However, most established information retrieval systems are based on index search system and it is not focused on correlation between data but data itself. Thus, this research aims to research on process of information flow retrieval system for large-scale construction projects.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1523-1529
• /
• 2011

Light Rail Transit is system that offer target Performance and function because various sub-system such as vehicles, power supply, signaling, communication, mechanical, track, civil is consisted as large complex system. Light Rail Transit and the complex system of safety, reliability to be a behavior, and target performance and function properly to system's configuration, design, manufacture, installation and test verification, through operations system requirements to accurately describe what It is more important. With this study, light rail system KSX ISO/IEC 15288 system life cycle process by applying engineering techniques utilizing light rail system in the early stages of construction from the concept, design, production, operation, maintenance and end-use to the disposal stage throughout the entire life cycle, from the beginning of construction until the end of construction of the stakeholder to define requirements, analyze the introduction of the system developers and system requirement of those who wish to be described accurately by selecting the best system and system requirement in order to achieve their purpose.